Advances in photocathode development for PICOSEC Micromegas precise-timing detectors Journal: NIM A
M. Lisowska, F. Guerra, A. Gurpinar, D. Zavazieva, R. Aleksan, S. Aune, J. Bortfeldt, A. Breskin, F.M. Brunbauer, M. Brunoldi, J. Datta, G. Fanourakis, S. Ferry, K. J. Floethner, M. Gallinaro, F. Garcia, I. Giomataris, D. Janssens, E. Jelinkova, A. Kallitsopoulou, I. Karakoulias, M. Kovacic, P. Legou, J. Liu, M. Lupberger, D.J.G. Marques, Y. Meng, H. Muller, R. De Oliveira, E. Oliveri, T. Papaevangelou, M. Pomorski, L. Ropelewski, D. Sampsonidis, T. Schneider, B. Schoenfelder, E. Scorsone, M. van Stenis, Y. Tsipolitis, S. Tzamarias, A. Utrobicic, I. Vai, R. Veenhof, L. Viezzi, P. Vitulo, X. Wang, S. White, Z. Zhang, Y. Zhou · 2026
Read Advances in photocathode development for PICOSEC Micromegas precise-timing detectors Journal: NIM A by M. Lisowska, F. Guerra, A. Gurpinar, D. Zavazieva, R. Aleksan, S. Aune, J. Bortfeldt, A. Breskin, F.M. Brunbauer, M. Brunoldi, J. Datta, G. Fanourakis, S. Ferry, K. J. Floethner, M. Gallinaro, F. Garcia, I. Giomataris, D. Janssens, E. Jelinkova, A. Kallitsopoulou, I. Karakoulias, M. Kovacic, P. Legou, J. Liu, M. Lupberger, D.J.G. Marques, Y. Meng, H. Muller, R. De Oliveira, E. Oliveri, T. Papaevangelou, M. Pomorski, L. Ropelewski, D. Sampsonidis, T. Schneider, B. Schoenfelder, E. Scorsone, M. van Stenis, Y. Tsipolitis, S. Tzamarias, A. Utrobicic, I. Vai, R. Veenhof, L. Viezzi, P. Vitulo, X. Wang, S. White, Z. Zhang, Y. Zhou (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-17953.txt.
Introduction
Lisowska and colleagues survey cathodes for the PICOSEC Micromegas timing detector, which pairs a Cherenkov radiator with a thin cathode and gas amplification. Beam tests with 150 GeV/c muons and lab tests compare many materials side by side in detail. A 5-nanometre cesium iodide cathode performs best, reaching 10.9 plus-or-minus 0.3 picoseconds with more than 30 extracted photoelectrons, the sharpest timing yet for this design. Titanium and boron carbide emerge as the most promising tougher alternatives, with timing near 30 picoseconds. The results support use in future tests.
Catalog record
| CREATOR | M. Lisowska, F. Guerra, A. Gurpinar, D. Zavazieva, R. Aleksan, S. Aune, J. Bortfeldt, A. Breskin, F.M. Brunbauer, M. Brunoldi, J. Datta, G. Fanourakis, S. Ferry, K. J. Floethner, M. Gallinaro, F. Garcia, I. Giomataris, D. Janssens, E. Jelinkova, A. Kallitsopoulou, I. Karakoulias, M. Kovacic, P. Legou, J. Liu, M. Lupberger, D.J.G. Marques, Y. Meng, H. Muller, R. De Oliveira, E. Oliveri, T. Papaevangelou, M. Pomorski, L. Ropelewski, D. Sampsonidis, T. Schneider, B. Schoenfelder, E. Scorsone, M. van Stenis, Y. Tsipolitis, S. Tzamarias, A. Utrobicic, I. Vai, R. Veenhof, L. Viezzi, P. Vitulo, X. Wang, S. White, Z. Zhang, Y. Zhou |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 33648 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2604.17953
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Advances in photocathode development for PICOSEC Micromegas precise-timing detectors Journal: NIM A M. Lisowska, F. Guerra, A. Gurpinar, D. Zavazieva, R. Aleksan, S. Aune, J. Bortfeldt, A. Breskin, F.M. Brunbauer, M. Brunoldi, J. Datta, G. Fanourakis, S. Ferry, K. J. Floethner, M. Gallinaro, F. Garcia, I. Giomataris, D. Janssens, E. Jelinkova, A. Kallitsopoulou, I. Karakoulias, M. Kovacic, P. Legou, J. Liu, M. Lupberger, D.J.G. Marques, Y. Meng, H. Muller, R. De Oliveira, E. Oliveri, T. Papaevangelou, M. Pomorski, L. Ropelewski, D. Sampsonidis, T. Schneider, B. Schoenfelder, E. Scorsone, M. van Stenis, Y. Tsipolitis, S. Tzamarias, A. Utrobicic, I. Vai, R. Veenhof, L. Viezzi, P. Vitulo, X. Wang, S. White, Z. Zhang, Y. Zhou Abstract The PICOSEC Micromegas detector is a precise-timing gaseous detector that combines a Cherenkov radiator, a semi-transparent photocathode and a Micromegas amplification stage, targeting time resolutions of tens of picoseconds for minimum ionising particles (MIPs). Initial single-pad prototypes achieved σ < 25 \sigma<25 ps, demonstrating strong potential for High Energy Physics (HEP) applications. The objective of this paper is a comprehensive characterisation of photocathodes, with a strong focus on robust materials while preserving excellent timing performance. The study includes laboratory measurements of optical and resistive properties together with beam tests using 150 GeV/ c c muons to evaluate time resolution and photoelectron yield for various photocathodes. The best performance was delivered by a 5 nm Cesium Iodide (CsI) photocathode, reaching σ = 10.9 ± 0.3 \sigma=10.9\pm 0.3 ps with more than 30 extracted photoelectrons, representing the most precise time resolution achieved by PICOSEC Micromegas to date. Metallic and carbon-based photocathodes, including Titanium (Ti), Boron Carbide (B 4 C) and Diamond-Like Carbon (DLC), were also tested, with Ti and B 4 C emerging as the most promising alternatives, achieving σ ≈ 30 \sigma\approx 30 ps with about 5 extracted photoelectrons. These results demonstrate that improved robustness can be achieved while maintaining excellent time resolution, supporting the feasibility of using the PICOSEC Micromegas concept in future experiments. Figure 1: (a) PICOSEC Micromegas detection concept: a charged particle traversing a Cherenkov radiator generates UV photons, which are converted into electrons at a photocathode. The electrons undergo two-stage gas multiplication and the resulting charge motion in the amplification gap induces a signal on the anode. Note that the figure is not drawn to scale. (b) Typical PICOSEC Micromegas waveform: The signal features a fast electron peak followed by a slow ion tail [ 8 ] . 1 Introduction The strong interest in precise-timing detectors is driven by the demanding conditions of future HEP experiments [ 1 ] . Sub-nanosecond resolution is essential to separate closely spaced events, improve track reconstruction and enable particle identification via time-of-flight measurements. At the same time, excellent timing performance, long-term stability and large-area coverage are required for practical use in future experiments. The PICOSEC Micromegas project [ 2 ] aims to develop a robust multi-channel gaseous detector with a target time resolution of \mathcal{O}(10) ps for MIPs. Early single-pad prototypes with CsI photocathodes achieved time resolutions \sigma~<~25 ps [ 2 ] , motivating further improvements in detector design [ 3 , 4 ] , stability and robustness [ 5 , 6 , 7 , 8 , 9 , 10 ] , as well as scalability to larger areas [ 11 , 12 , 13 , 14 , 15 , 16 ] . Traditional photocathode materials such as CsI offer high quantum efficiency (QE) and strong ultraviolet (UV) sensitivity, but suffer from vulnerability to ion backflow and discharges, as well as humidity. These limitations motivate the development of more robust alternatives. Although preliminary studies of other materials have been performed [ 5 , 6 , 7 , 8 , 9 , 10 ] , a comprehensive characterisation of metallic and carbon-based photocathodes - covering both time resolution and photoelectron yield - remains lacking. This work addresses this gap by developing more robust photocathodes while maintaining excellent timing performance. Within the scope of this paper, the characterisation of four photocathode materials - CsI, Ti, B 4 C and DLC - and their performance as candidates for PICOSEC Micromegas detectors are reported. The samples were manufactured at the Thin Film and Glass (TFG) and Micro-Pattern Technologies (MPT) workshops at the European Organization for Nuclear Research (CERN). The measurements were carried out during two test beam campaigns in July and November 2025. 2 PICOSEC Micromegas detection concept The PICOSEC Micromegas detection concept [ 2 ] is illustrated in Fig. 1 a. The detector reduces time jitter from primary gas ionisation by using a Cherenkov radiator. A charged particle crossing the crystal produces UV photons, which are partially converted into electrons on a photocathode deposited on a 3 mm-thick MgF 2 window. Since all electrons are created at the same surface, the uncertainty in ionisation location is minimised, improving the timing precision. The detector operates in a Ne/C 2 H 6 /CF 4 (80/10/10 %) gas mixture [ 17 ] at ambient pressure. A stainless-steel woven mesh (18 \mu m wires, 45 \mu m opening, 30 \mu m thickness, 50% optical transparency [ 2 ] ) protects the photocathode from ion backflow and suppresses discharges. A copper-clad polyimide spacer defines the pre-amplification gap. Electric fields of \sim 30–40 kV/cm in the pre-amplification gap and \sim 20 kV/cm in the amplification gap yield total gains of 10^{5} – 10^{6} . The motion of electrons toward the anode and ions toward the mesh in the amplification gap induces a signal, which is amplified and digitised. A typical waveform, showing a fast electron peak followed by a slow ion tail, is shown in Fig. 1 b. The leading edge of the electron peak defines the Signal Arrival Time (SAT). A detailed description of the detection concept is provided in [ 8 ] . Figure 2: Beam telescope setup including three triple-GEM detectors for particle tracking, an MCP-PMT as timing reference and DAQ trigger, together with PICOSEC Micromegas prototypes for testing [ 8 ] . 3 Experimental methodology Photocathode optical measurements were performed using the ASSET (A Small Sample Evaporation Test) setup [ 6 , 18 , 19 ] , developed for quantitative studies of QE, transparency and ageing. ASSET provided tunable Vacuum-UltraViolet (VUV) illumination in the 120–200 nm range via a deuterium lamp [ 20 ] and monochromator system [ 21 ] and allowed operation in reflective and transmission modes under a vacuum of 10 -6 mbar. It used calibrated CsI photomultiplier tubes (PMTs) to monitor light intensity for precise current-based QE and transparency extraction. Transparency in the 200–800 nm range was measured with a PerkinElmer Lambda 650 UV/VIS spectrophotometer [ 22 ] . ASSET also enabled controlled degradation measurements by exposing samples to ion bombardment generated in an X-ray–irradiated gas chamber. A complete technical description of the ASSET apparatus and measurement procedures is provided in previous publications [ 6 , 8 , 9 ] . Scanning electron microscopy (SEM) was further employed to characterise and compare the surface morphology of selected photocathodes with varying thicknesses. Surface resistivity measurements were carried out as an additional check to verify that the estimated film thicknesses follow the expected trend, with thinner samples exhibiting higher surface resistivity. The measurements were performed using a picoammeter [ 23 ]