Improved Desalination by Polymer Grafting

Mamta Yadav*, Clifford E. Woodward** and Jan Forsman* **School of Chemistry University College, University of New South Wales, ADFA Canberra ACT 2600, Australia and *Theoretical Chemistry, Chemical Centre P.O.Box 124, S-221 00 Lund, Sweden · 2026

Read Improved Desalination by Polymer Grafting by Mamta Yadav*, Clifford E. Woodward** and Jan Forsman* **School of Chemistry University College, University of New South Wales, ADFA Canberra ACT 2600, Australia and *Theoretical Chemistry, Chemical Centre P.O.Box 124, S-221 00 Lund, Sweden (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-16267.txt.

Introduction

Yadav, Woodward, and Forsman improve desalination by grafting polymers onto electrodes. CDI promises efficient water treatment, but suffers weak ion uptake and poor charge use. Their grafted block copolymers boost performance strongly, without changing pore structure. Computer models based on density functional theory and Monte Carlo simulations support the gain. Even simple neutral polymers help, while a designed block architecture helps more.

Catalog record

CREATORMamta Yadav*, Clifford E. Woodward** and Jan Forsman* **School of Chemistry University College, University of New South Wales, ADFA Canberra ACT 2600, Australia and *Theoretical Chemistry, Chemical Centre P.O.Box 124, S-221 00 Lund, Sweden
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE19563
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2604.16267

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Improved Desalination by Polymer Grafting Mamta Yadav*, Clifford E. Woodward** and Jan Forsman* **School of Chemistry University College, University of New South Wales, ADFA Canberra ACT 2600, Australia and *Theoretical Chemistry, Chemical Centre P.O.Box 124, S-221 00 Lund, Sweden Abstract Freshwater scarcity demands desalination technologies that are efficient, scalable, and sustainable. Capacitive deionisation (CDI) is promising but remains limited by inefficient ion adsorption and poor charge utilisation. Here, we show that suitably chosen polyampholytic block copolymer grafting can substantially enhance CDI performance, via a combination of dipolar response and steric effects. Using mean-field classical density functional theory and grand-canonical Monte Carlo simulations, we demonstrate that such polymer grafted electrodes enable strongly improved desalination performance, without altering the pore architecture. Even an electrode grafting by simple neutral polymers can generate an improvement, although a suitably designed block polymer architecture offers an additional performance gain. These results establish interfacial block copolymer grafting as a powerful route toward high-performance, membrane-free desalination. Introduction- Water is the foundation of life, yet access to safe drinking water is rapidly declining across the globe 30 . From remote rural regions to densely populated urban centers, communities are struggling to secure reliable access to potable water 34 ; 24 ; 18 . Growing populations, industrial expansion, and agricultural intensification are placing unprecedented pressure on limited freshwater resources 32 ; 31 . Despite the fact that nearly 70\% of the Earth is covered by water, most of it is saline and not suitable for direct human use. This contradiction between abundance and scarcity represents one of the most pressing scientific and societal challenges of our time 25 ; 29 . Traditional water management systems are increasingly inadequate in the face of climate change and rising demand. Established desalination technologies, including thermal distillation 22 , reverse osmosis 8 , and electrodialysis 2 , have enabled large scale freshwater production. However, their high energy demand, operational costs, and environmental impacts limit long term sustainability, which motivates the development of greener alternatives. Developing sustainable technologies to convert seawater into potable water is therefore not just an option, but a necessity for long term global resilience 3 ; 20 . Capacitive deionisation (CDI) has emerged as an energy efficient and cost effective desalination strategy, offering a promising route toward scalable and sustainable freshwater production 9 ; 13 . By exploiting electric double layer charging in porous electrodes, CDI enables the reversible electrosorption and release of ions under an applied potential 19 ; 37 ; 4 ; 10 . Conventional CDI electrodes based on activated carbon are fundamentally limited by low charge efficiency. Considerable effort has therefore focused on improving electrode materials 27 ; 21 . Nanostructured carbons such as graphene derivatives and carbon nanotubes provide enhanced conductivity and an increased accessible surface area, while emerging materials including MXenes offer larger salt adsorption capacities 6 ; 11 ; 14 ; 5 . Despite these advances, CDI performance remains constrained by nonselective ion desorption. Membrane CDI (MCDI), partially addresses this issue by introducing ion exchange membranes that suppress co-ion leakage and enhance salt removal efficiency 15 . Similarly, flow-electrode CDI (FCDI) enables continuous desalination by electrosorbing ions onto circulating carbon slurries, overcoming electrode saturation 36 . However, FCDI suffers from low charge efficiency and electrode degradation, while MCDI systems are often limited by weak electrode membrane adhesion and increased contact resistance. Even recent designs incorporating ion-exchange polymers yield only marginal improvements in desalination efficiency 16 . These limitations highlight the need for fundamentally new strategies to control ion adsorption at electrode interfaces 1 ; 23 . Block co-polymer based porous carbon fibers have recently shown improved CDI performance by optimising ion accessible surface area and transport routes. However, these approaches rely primarily on bulk structural optimisation of electrode materials 17 ; 12 . In contrast, polymer grafting provides a direct route to control interfacial chemistry and ion-surface interactions without altering the pore architecture. A recent experimental study has shown that grafting conductive polymers onto activated carbon and MnO 2 electrodes enhances both desalination capacity and kinetics through pseudocapacitive ion storage 28 . These results establish interfacial polymer functionalisation as a promising route toward high-performance, membrane free capacitive deionisation. In this Letter, we demonstrate that block copolymer grafted electrodes fundamentally reshape ion adsorption and significantly enhance desalination performance. This finding is supported by desalination loops obtained from classical density functional theory (cDFT), as well as by grand-canonical Monte Carlo simulations. Despite the coarse-grained nature of our approach, the excellent agreement between these approaches highlights the robustness and predictive power of the mean-field cDFT framework. Surprisingly, we have found that even neutral polymer grafts can deliver increased desalination efficiencies, although a block charge polymer architecture leads to an additional gain. Model and theory . We settle with investigations of the negative electrode, and propose a “reversed” treatment at the positive electrode. We consider electrode pores, that are modelled as slits, where planar and parallel walls of infinite size are separated a distance H . The walls carry a uniform surface charge density \sigma_{s} , the value of which is determined by the electroneutrality condition, for an input value of the applied electrode potential. Borrowing notation from earlier cDFT work 10 , we denote the electrode volume by V_{e} and the “bucket”, to be desalinated, volume by V_{b} . It is useful to define a ratio parameter \xi=V_{e}/(V_{e}+V_{b}) . We shall work under \Psi -control, where \Psi is the applied electrode (Donnan) potential. We will compare two main cases, where the electrodes are either bare (reference) or carry grafted polymers, that are overall electroneutral. For the main part of this work, the grafted chains will have a block charge structure, where the end monomer of the positive block (with one bonded neighbouring monomer) is grafted to the electrode. We might, for instance, write |++++---- as a pictorial illustration of grafted 8-mers (4+4), where “ | ” describes the planar electrode surface to which the “left-most” positive monomer is grafted. We will, however, also explore the option of grafted polymers where all monomers are electroneutral. In all cases, the fixed bond length (but rotationally flexible) between connected monomers is set to b=6 Å. Moreover, in all cases of the main paper, all simple ions and monomers have a hard-sphere (HS) diameter of d=4 Å. In Appendix B , we will also explore the option of vanishing hard cores, for all species. The densities of positive and negative monomers are denoted n_{+} and n_{-} . In the slit geometry, where the planar charged surfaces are separated by H=h+d we employ the following grand potential per unit area \omega , for the case of grafted r-mer chains, composed of charged blocks: \begin{split}\beta\omega(T,\phi_{g},\mu_{c},\mu_{a},\Psi;[N({\bf Z}),n_{c}(z),n_{a}(z)])=\quad\\ \int N({\bf Z})\left(\ln[N({\bf Z})]-1\right)d{\bf Z}+\beta\int N({\bf Z})V_{b}({\bf Z})d{\bf Z}+\int n_{c}(z)\left(\ln[n_{c}(z)]-1\right)+n_{a}(z)\left(\ln[n_{a}(z)]-1\right)dz+\\ +\beta\int{\cal F}_{HS}^{(ex)}(n_{+},n_{-},n_{c},n_{a})dz+\frac{\beta e}{2}\int\psi(z)q(z)dz-\beta\int(\mu_{c}n_{c}(z)+\mu_{a}n_{a}(z))dz+\beta\int n_{+}^{e}(z)\phi_{g}dz\end{split} (1.1) where e is the elementary charge, z denotes the coordinate perpendicular to the surfaces, {\bf Z}=z_{1}...z_{r} , N({\bf Z}) is polymer density distribution, and \psi(z) is the local mean-field potential at z , including the applied electrode potential \Psi . The grafting potential \phi_{g} only acts on positive end monomers, with a density n_{+}^{e}(z) . In all cases reported in this work, we have used a fixed grafting density, such that \int_{0}^{H/2}n_{+}^{e}(z)dz=0.02/ Å

Read the complete text