Multi-site Radar Systems for High-Precision Indoor Positioning and Tracking

Lang Qin, Mandong Zhang, Wenting Song, Xiaohu Wu · 2026

Read Multi-site Radar Systems for High-Precision Indoor Positioning and Tracking by Lang Qin, Mandong Zhang, Wenting Song, Xiaohu Wu (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-15688.txt.

Introduction

Qin and five colleagues present a velocity synthesis-assisted localization algorithm for multi-site single-input single-output radar indoor tracking. Fusing radial velocity measurements from multiple radars iteratively refines positions within range bins, staying robust under low signal-to-noise, severe multipath, and large sync latency. Without MIMO hardware or strict phase sync, the system reaches centimeter-level tracking accuracy for people, beating existing methods on complex trajectories.

Catalog record

CREATORLang Qin, Mandong Zhang, Wenting Song, Xiaohu Wu
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE57450
LICENSEhttp://creativecommons.org/licenses/by-sa/4.0/
RIGHTSCC BY SA
SOURCEarXiv

Source: https://arxiv.org/abs/2604.15688

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Multi-site Radar Systems for High-Precision Indoor Positioning and Tracking Thanks: Manuscript received January 21, 2026. This work was supported by the Shenzhen Science and Technology Program under Grant (JCYJ20230807091814030, JCYJ20220818100408018, and 20231115204236001), the National Natural Science Foundation of China under Grant (62471211 and 32371992), and in part by the Guangdong Basic and Applied Basic Research Foundation under Grant (2025A1515011109 and 2024A1515011902). Corresponding authors: Zhiqiang Huang and Xiaoguang Liu. Thanks: L. Qin is with the Microelectronics Thrust, Hong Kong University of Science and Technology (Guangzhou) (HKUST(GZ)), as a Ph.D. student, and with the School of Microelectronics (SME), Southern University of Science and Technology (SUSTech), Shenzhen, China, as a visiting scholar. Thanks: M. Zhang, W. Song, and X. Liu are with SME, SUSTech, Shenzhen, China. Thanks: Z. Huang is with the Microelectronics Thrust, HKUST(GZ), Guangzhou, China. Thanks: X. Wu is with Peng Cheng Laboratory, Shenzhen, China. Lang Qin, Mandong Zhang, Wenting Song, Xiaohu Wu Abstract This paper introduces a high-precision indoor positioning and tracking method that utilizes multi-site single-input single-output (SISO) radar systems. We propose a novel velocity synthesis-assisted (VSA) localization algorithm that iteratively refines target position estimates within range bins by fusing radial velocity measurements from multiple radars. This approach ensures enhanced accuracy in both velocity and position estimation. Moreover, the inherent geometric constraints introduced by velocity synthesis enable the proposed algorithm to remain robust under low signal-to-noise ratio (SNR), severe multipath propagation, and large synchronization latency. Notably, our method eliminates the use of multiple-input-multiple-output (MIMO) configurations and stringent phase synchronization requirements, substantially reducing hardware complexity while maintaining high positioning accuracy. We define standardized reference trajectories to facilitate a comprehensive and reproducible performance evaluation. Extensive simulations and experimental validations demonstrate that our multi-site radar systems achieve centimeter-level tracking accuracy for human subjects, outperforming existing methods in complex trajectory tracking. I Introduction With the rapid development of smart homes, industrial automation, and medical monitoring, the demand for high-precision indoor positioning and tracking technology has grown significantly. Traditional positioning methods, such as global positioning system (GPS) and Beidou, fail in indoor environments due to severe signal attenuation and multipath effects. Indoor localization can be broadly categorized into active (tag-based) and passive (tag-free) localization. Various tag-based indoor positioning methods exist, including radio-frequency identification (RFID) [ 29 , 25 ] , secondary radar [ 27 , 6 ] , ultrawideband (UWB) [ 46 , 19 ] , etc. The premise of using these methods is that users must physically carry positioning tags, which can be inconvenient in many scenarios. Tag-free positioning approaches, on the other hand, do not require a physical tag attached and rely on non-contact methods for positioning. For example, vision-based techniques, such as stereo-vision, time-of-flight (ToF), and structured light systems [ 14 , 22 , 32 ] , are widely used to provide accurate location estimation. In many cases, vision-based positioning systems have high enough imaging resolution to provide further capabilities such as human identification and gait recognition [ 33 , 41 ] . However, due to privacy concerns, vision-based solutions are not popular in home and many business settings [ 1 , 16 ] . At the same time, radio frequency (RF)-based techniques have seen extensive research efforts in recent years, such as commercial wireless fidelity (Wi-Fi) [ 42 , 44 ] , impulse radio ultra-wideband (IR-UWB) radar [ 11 , 47 ] and millimeter-wave (mmW) radar [ 4 , 15 ] . Radar sensors are an important sensing modality for indoor positioning [ 30 ] . Compared to cameras, microwave and mmW radars rely on electromagnetic scattering to retrieve spatial and kinematic information rather than capturing optical imagery. This fundamental difference in sensing modality makes radar a less intrusive solution for indoor applications. In addition, radars are capable of measuring speed/velocity which is critical information in applications such as gait/gesture recognition [ 15 , 38 ] and fall detection [ 5 , 20 ] . Compared to commercial Wi-Fi devices, microwave and mmW radars are not subject to the same hardware limitations that lead to significant carrier frequency offsets due to environmental changes, and therefore offer higher positioning accuracy. Compared to IR-UWB radar, which is often favored for through-wall and non-line-of-sight (NLOS) scenarios due to its extremely high time resolution, mmWave radar offers superior spatial resolution and high-precision Doppler velocity measurements. Fig. 1: Indoor high-precision target single positioning. (a) Single MIMO radar positioning [ 7 ] . (b) Multi-site SISO radar systems for static target positioning. (c) Multi-site SISO radar systems for dynamic target positioning and tracking. Spatial resolution is an important metric in radar systems. The radial or range resolution \Delta R of a radar is primarily determined by occupied radio-frequency bandwidth B of the radar signal and is given approximately by \Delta R=c/2B , where c is the speed of light. Off-the-shelf radar sensors working at mmW frequencies can provide centimeter-level range resolution [ 34 , 39 ] . The angular resolution of a microwave/mmW radar is provided by either a phased array configuration or a multiple-input-multiple-output (MIMO) configuration as shown in Fig. 1 (a). For an effective two-dimensional aperture of N\times N antennas, the angular resolution in radians is approximately \Delta\theta=0.886\lambda/D , where D is the directivity of the effective array. Several MIMO radar systems for indoor applications have been demonstrated [ 7 , 37 , 17 , 35 ] . For example, a 6\times 6 MIMO radar system is demonstrated in [ 7 ] with an angular resolution of 17^{\circ} at 2.45 GHz which translates to a cross range resolution of 0.6 m at a distance of 1.8 m. Achieving very high angular resolution so that cross-range resolution can approach that of the range resolution requires very large and potentially impractical array sizes. To address the inherent resolution limitations of single radar systems, multi-site radar systems have been proposed as a solution. Currently, strategies for implementing radar systems synchronization are generally divided into two categories: hardware connection and software connection. The first category relies on cables to realize bistatic measurements and synchronization. Radar networks using frequency-division multiplexing (FDM) [ 9 ] or distributed monostatic/bistatic MIMO constellations [ 24 , 8 ] have been explored. While these custom systems demonstrate excellent position and tracking precision, their practical deployment is severely constrained by the need for complex cabling, making them less suitable for consumer-level indoor applications. Another method uses multiple independent monostatic radar nodes to form multi-site radar systems by networks connection. The removal of physical cabling results in increased synchronization latency. Therefore, each radar node typically rely solely on monostatic measurements. In addition to synchronization strategy, the effective fusion of data from spatially distributed radars presents another challenge. Existing methods can be categorized into two approaches: learning-based [ 36 , 12 , 10 ] and geometry-based [ 4 , 43 , 15 , 47 , 11 ] . Typical learning-based approaches map raw radar signatures directly to indoor positions by using end-to-end deep learning. Although promising, these methods often require extensive training datasets and lack model interpretability. Furthermore, significant errors may arise when the testing environment changes drastically. In contrast, geometry-based approaches offer superior generalization capabilities. For low-cost SISO radars, a conventional approach uses trilateration for positioning as shown in Fig. 1 (b), followed by an extended

Read the complete text