Design and Verification of a Terahertz Bandpass Filter using a Spoof Surface Plasmon Polariton Waveguide with Gapped Unit Cells
Mohsen Haghighat 1, Ali Dehghanian 1, Levi Smith 1,2,∗ · 2026
Read Design and Verification of a Terahertz Bandpass Filter using a Spoof Surface Plasmon Polariton Waveguide with Gapped Unit Cells by Mohsen Haghighat 1, Ali Dehghanian 1, Levi Smith 1,2,∗ (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-14466.txt.
Introduction
Haghighat, Dehghanian, and Smith verify a flat guided-wave terahertz filter built from a spoof surface plasmon polariton waveguide on a coplanar stripline with grooves and periodic gaps. The design pairs the low-pass edge of the polariton band with the high-pass action of gaps acting as series capacitors, so cutoff frequencies follow from unit-cell geometry. A demo device centers near 1 terahertz with a bandwidth of 0.25 terahertz, and measurements show the passband plus cutoffs in line with simulation. The work confirms the filter concept in hardware.
Catalog record
| CREATOR | Mohsen Haghighat 1, Ali Dehghanian 1, Levi Smith 1,2,∗ |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 25448 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2604.14466
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Design and Verification of a Terahertz Bandpass Filter using a Spoof Surface Plasmon Polariton Waveguide with Gapped Unit Cells Mohsen Haghighat 1, Ali Dehghanian 1, Levi Smith 1,2,∗ Abstract This paper presents the experimental verification of a planar guided-wave terahertz (THz) spoof surface plasmon polariton (SSPP) bandpass filter (BPF) using a coplanar stripline (CPS) with internal grooves and periodic gaps. The proposed BPF operates by combining the low-pass behavior from the SSPP’s band edge and the high-pass behavior from the gaps that act as series capacitors. The higher and lower cut-off frequencies can be tailored by the appropriate selection of the unit cell geometry. For demonstration, a BPF with a center frequency of approximately 1 THz and a bandwidth of 0.25 THz was designed, fabricated, and experimentally validated. The passband around 1 THz is observed in the measurements, along with the lower and higher cut-off frequencies at approximately 0.91 THz and 1.16 THz, respectively, in agreement with simulation results. ∎ 1 Introduction Spoof surface plasmon polariton (SSPP) devices operating at microwave and terahertz (THz) frequencies have garnered substantial research interest over the past two decades 16 ; 3 ; 22 ; 28 ; 25 ; 7 . This attention is primarily due to their inherited properties from conventional surface plasmon polaritons (SPPs), including significant field confinement and customizable dispersion characteristics through geometric modifications 19 ; 14 ; 13 ; 10 . Originally, SSPP structures were introduced using 3D geometries, such as arrays of holes or grooves on a metal surface, interacting with obliquely incident light or waves 16 ; 3 . Subsequently, the use of guided waves for SSPP excitation was explored due to their improved integration possibilities 22 . A typical guided-wave SSPP structure comprises a corrugated single conductor and a matching or transition circuit (TC). Most SSPP research has focused on low-loss SSPP waveguides 25 or their low-pass filtering capabilities 5 . Few SSPP-based band-pass filters (BPF) have been reported beyond microwave and millimeter wave frequencies 6 ; 26 ; 27 ; 12 ; 2 ; 17 ; 9 . In general, the mentioned BPFs either use cavities, which make on-chip integration challenging, or use a microstrip configuration, which is susceptible to significant radiation losses on standard substrates at THz frequencies 20 . Furthermore, there is limited research on experimentally validated SSPP-based BPFs at THz frequencies, mainly due to a lack of instrumentation, coupling challenges, and various loss mechanisms 21 ; 22 . In addition to these challenges in the design of SSPP-based BPFs, practical implementation at THz frequencies is complicated by excitation and detection difficulties. One of the popular feedlines for the excitation of SSPPs is coplanar waveguides (CPW) 25 . Integration of CPW with SSPPs presents challenges, including the need for large flaring grounds to efficiently excite SSPPs 23 . As an alternative, CPS feedlines have demonstrated their effectiveness at THz frequencies in achieving low-loss SSPP excitation 7 . SSPP waveguides that are integrated with CPS can have an internal 8 or external 5 array of stubs, depending on the specific application. BPFs are one of the key components of front-end systems for wireless communication applications, used for band and channel selection and the rejection of unwanted signals 2 ; 12 . Therefore, the SSPP-based BPF, with the merits of low loss, broadband capability, and a compact structure, has been widely investigated at microwave frequencies in the past decade 2 ; 6 ; 12 ; 27 ; 26 . Additionally, BPFs are useful components for sensing applications, targeting a specific range of absorption frequencies 11 . Nevertheless, the literature reveals a gap in the design and experimental demonstration of planar (guided-wave) THz SSPP-based band-pass filters, particularly for frequencies beyond 300 GHz, which have potential applications in future short-range THz data communication and sensing applications. Our previous work demonstrated a THz BPF that combines the effects of high-pass filtering via a capacitive TC and low-pass filtering by the SSPP waveguide 9 . In 9 , we found that the BPF has good performance and can operate in the THz region, but its design procedure can be cumbersome because both the upper and lower cut-off frequencies cannot be predicted by unit cell eigenfrequency simulations. The filter presented in this work can be initially designed using only eigenfrequency simulations of the unit cell, which expedites the design procedure. The SSPP-based THz BPF introduced in this paper is based on a gapped internal CPS-SSPP unit cell. Illustrations of gapped and ungapped unit cells are shown in Table 1 . The addition of the gap converts the response from a LPF to a BPF. In this paper, we will investigate the complete BPF structure which means that we must first excite CPS feedlines (quasi-TEM) and then cascade a TC to convert the quasi-TEM mode to the SSPP TM mode 23 ; 7 . The TC consists of gradually lengthened SSPP stubs until the final maximum depth of corrugation is reached. For a substrate, we use a thin 1 µm silicon nitride (SiN) membrane, which has been shown to reduce loss and dispersion at THz frequencies 20 ; 7 . Figure 1 shows the BPF, and Fig. 2 shows the fabricated SSPP-based BPF on the SiN membrane, along with photoconductive switches (PCS) for the generation and detection of THz signals. Table 1 : Unit cell illustrations Gapped Internal SSPP (this work) Ungapped Internal SSPP 4 Bandpass Filter Lowpass Filter Table 2 : Comparison of Experimental Results for SSPP-based BPFs Reference f_{0} (GHz) FBW Min. IL (dB) 6 5 120% 0.37 26 10 36% 1.60 27 3 43% 1.00 12 85 45% 0.58 2 33 18% 0.50 17 10 6% 3 9 1000 30% 7 This Work 1000 25% * 7 ** * This FBW is related to the fabricated and measured structure, but it can be changed with geometry modifications. ** Simulated values considering all loss sources and with \delta = 3 µm and N = 8. Table 2 provides a comparison of several SSPP-based BPFs with experimental results and our work. We were unable to find experimental results for many other SSPPs-based BPFs that were verified at THz frequencies; therefore, in Table 2 , our structure clearly exhibits the highest insertion loss (IL) compared to its microwave counterparts that operate at less than 1/10th of the frequency. Also, the insertion loss is comparable to our previous design at 1 THz 9 . This increased insertion loss is primarily due to increased conduction losses at THz frequencies. We will briefly address the high insertion loss by comparing the SSPP-based BPF with the SSPP-based LPFs found in the literature. In 24 , they measure the insertion loss to be between 5-10 dB at 0.275 THz. In 29 , they measure a 4 dB insertion loss at 0.14 THz. Therefore, we note that our proposed filter has an insertion loss comparable to other SSPP filters and operates at THz frequencies. We clarify that the goal of this research is not to propose a high performance optimized filter; this paper aims to demonstrate that the proposed proof-of-concept filter exhibits bandpass behavior at THz frequencies and to provide the reader with design guidance. Future work can improve the insertion loss by modifying the geometry. For example,