On phase separation and crystallization of Ge-rich GeSbTe alloys from atomistic simulations with a machine learning interatomic potential Preprint: AIP/123-QED

Omar Abou El Kheir, Dario Baratella, Marco Bernasconi · 2026

Read On phase separation and crystallization of Ge-rich GeSbTe alloys from atomistic simulations with a machine learning interatomic potential Preprint: AIP/123-QED by Omar Abou El Kheir, Dario Baratella, Marco Bernasconi (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-13843.txt.

Introduction

Abou El Kheir, Baratella, and Bernasconi build a learned model for germanium-rich GeSbTe alloys. These alloys switch phases in microcontroller memories. A neural network fits energies and forces from density functional theory across mixes. The potential transfers across the phase diagram. The team simulates crystallization and splitting for three alloys. On nanosecond timescales at 600 kelvin, the products are crystalline cubic GeTe with a little antimony, plus amorphous GeSb and germanium. Those products differ from stable ones, shaped by kinetics in the set operation. The result helps build fast memory.

Catalog record

CREATOROmar Abou El Kheir, Dario Baratella, Marco Bernasconi
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE48117
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2604.13843

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

On phase separation and crystallization of Ge-rich GeSbTe alloys from atomistic simulations with a machine learning interatomic potential Preprint: AIP/123-QED Omar Abou El Kheir, Dario Baratella, Marco Bernasconi Abstract We developed a machine learning interatomic potential (MLIP) for Ge-rich GeSbTe alloys of interest for applications in phase change memories embedded in microcontrollers. The MLIP was generated by fitting with a neural network method a large database of energies and forces computed within density functional theory of elemental, binary, stoichiometric and non-stoichiometric ternary alloys in the Ge-Sb-Te phase diagram. The MLIP is demonstrated to be highly transferable to large regions of the phase diagram around the compositions included in the dataset. The MLIP is then exploited to simulate the crystallization with phase separation of three Ge-rich alloys on the Ge-Sb 2 Te 3 and Ge- Ge 2 Sb 2 Te 5 tie-lines that correspond to the set process of the memory cell. The transformation on the ns time scale and at 600 K, comparable to the operation conditions of the memory, yields crystalline cubic GeTe slightly Sb-doped and amorphous GeSb and Ge. These metastable phases differ from the thermodynamically stable products and form due to kinetics effects on the short time span of the set operation in phase change memories. I Introduction Phase change memories (PCMs) are of interest for several applications, including stand-alone storage class memories Fantini 2020 ; Boniardi and Redaelli 2025 , in-memory and neuromorphic computing devices Sebastian et al. 2020 ; Syed, Le Gallo, and Sebastian 2025 , and embedded memories in microcontrollers Cappelletti et al. 2020 ; Redaelli, Petroni, and Annunziata 2022 . These applications exploit a fast and reversible transformation between the crystalline and amorphous phases of a chalcogenide alloy, typically GeSbTe (GST) Wuttig and Yamada 2007 ; Noé et al. 2017 ; Zhang et al. 2019 , induced by heating. Depending on the device architecture, heat is provided by current pulses either via Joule effects within the transforming material or via a resistive element, the heater, in contact with a thin film of GST. By applying an intense current pulse, crystalline GST is brought above the melting temperature and subsequently amorphizes due to fast cooling (reset process). By applying a less intense and longer current pulse, the amorphous phase recrystallizes (set process). For embedded applications, the amorphous phase must sustain the thermal budget for the soldering process in which the device is exposed to 550 K for a few minutes. To meet this requirement, Ge-rich GST alloys (GGST) have been developed reaching a crystallization temperature T x above 600 K for alloys on the Ge-Sb 2 Te 3 tie-line Zuliani et al. 2013 ; Zuliani et al. 2015 ; Palumbo et al. 2017 ; Navarro et al. 2013 , which is much higher than that (T x =420-440 K Noé et al. 2016 ) of the flagship Ge 2 Sb 2 Te 5 (GST225) compound, mostly used for neuromorphic and stand-alone devices Wuttig and Yamada 2007 ; Noé et al. 2017 ; Zhang et al. 2019 . GGST has already been exploited in the next-generation microcontrollers (28 nm MOS technology) Arnaud et al. 2018 ; Arnaud et al. 2020 . The increase in T x comes at the cost of increased complexity in the set and reset processes. In fact, the crystallization of non-stoichiometric GGST alloys involves the segregation of Ge in excess and the formation of GST crystallites with a lower fraction of Ge Zuliani et al. 2015 ; Palumbo et al. 2017 ; Agati et al. 2019 ; Luong et al. 2021 ; Privitera et al. 2018 ; Privitera et al. 2020 ; Prazakova et al. 2022 ; Díaz Fattorini et al. 2022 ; Cecchi et al. 2022 ; Yimam et al. 2022 . The mass transport that accompanies this transformation slows the overall process, increasing T x . The crystallization temperature can be further increased by doping with nitrogen Cheng et al. 2012 ; Navarro et al. 2016 ; Prazakova et al. 2020 ; Remondina et al. 2025 ; Luong et al. 2021 ; Thomas et al. 2021 which was shown to reduce the mobility of Ge Lee, Loke, and Elliott 2015 . For GGST alloys on the Ge-GST225 tie-line, which are often discussed in literature Prazakova et al. 2022 ; Privitera et al. 2018 ; Privitera et al. 2020 ; Rahier et al. 2023 , the transformation should yield pure Ge and GST225 from the thermodynamical point of view. In fact, in the ternary Ge-Sb-Te phase diagram, the only thermodynamically stable compounds lie on the GeTe-Sb 2 Te 3 and Sb-Sb 2 Te 3 tie-lines Abou El Kheir and Bernasconi 2021 . Indeed, heating GGST films for hours above T x leads to the formation of face centered cubic (fcc) GST with a lattice parameter consistent with cubic GST on the GeTe-Sb 2 Te 3 pseudobinary line Agati et al. 2019 . However, in the short time span of the set operation in the devices, kinetic effect might favor the formation of metastable phases or intermediate products preventing the transformation into the thermodynamically stable compounds. For example, experimental evidence was provided on the formation of GeTe as an intermediate product in the decomposition of GGST films Privitera et al. 2020 ; Rahier et al. 2023 . In Ref. Rahier et al. 2023 , Ge segregation and the formation of GeTe crystals were observed annealing a GGST film above 310 o C. First, GeTe crystallizes in the metastable Pnma phase that triggers the crystallization of pure Ge and then evolves into the cubic phase. Only by further annealing at 410 o C, incorporation of Sb leads to the formation of crystallites with composition close to GST225 Rahier et al. 2023 . In other works in which the temperature was probably sufficiently higher than T x , the final products consisting of crystalline Ge and cubic GST were observed with Ge crystallizing first Prazakova et al. 2022 . The likely possibility of formation of cubic GeTe in the decomposition process of GGST was actually predicted by density functional theory (DFT) calculation of the convex hull in the Ge-Sb-Te phase diagram Abou El Kheir and Bernasconi 2021 . The knowledge of the DFT formation energy of all GST alloys in the central part of the Ge-Sb-Te ternary phase diagram allowed us to identify the metastable cubic crystalline phases, in addition to the themodynamically stable compounds on the GeTe-Sb 2 Te 3 tie-line, that are more likely to form during the crystallization of a generic GST alloy Abou El Kheir and Bernasconi 2021 . It was shown that Sb-doped cubic GeTe was the most probable product in the decomposition of several Ge-rich alloys on the Ge-Sb 2 Te 3 , Ge-GST225 and Ge-GST124 tie-lines Abou El Kheir, Dragoni, and Bernasconi 2021 ; Cecchi et al. 2022 ; Yimam et al. 2022 . In the real device, the transformation is further affected by the presence of temperature gradients and high electric fields that drive atoms with effective charges of different sign in opposite directions. An example of the complex nanostructure arising in the GGST-PCM is provided in Ref. Ran et al. 2025 where scanning transmission electron microscopy (TEM) and electron energy loss spectroscopy (EELS) were

Read the complete text