Low-confinement silicon nitride waveguides manufactured via direct glass bonding
Mikhail V. Tsvetkov, Dmitry V. Obydennov, Alexandr S. Rykov, Alexandr R. Shevchenko, Maxim V. Shibalov, Ivan A. Filippov, Stepan D. Perov, Michael A. Tarkhov · 2026
Read Low-confinement silicon nitride waveguides manufactured via direct glass bonding by Mikhail V. Tsvetkov, Dmitry V. Obydennov, Alexandr S. Rykov, Alexandr R. Shevchenko, Maxim V. Shibalov, Ivan A. Filippov, Stepan D. Perov, Michael A. Tarkhov (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-12814.txt.
Introduction
Mikhail V. Tsvetkov and eight colleagues build low-confinement silicon nitride waveguides by direct glass bonding. Standard cladding stays near 20 micrometers thick, hampering loss control. Two Borofloat 33 wafers are bonded after trenches are etched and filled with silicon nitride. The result is a thick symmetric cladding around the waveguide core. Straight guides with a 50 nanometer core height were tested. Chip transmission reached 60 percent with standard fiber coupling. Propagation losses fell to 0.62 decibels per centimeter in the best case.
Catalog record
| CREATOR | Mikhail V. Tsvetkov, Dmitry V. Obydennov, Alexandr S. Rykov, Alexandr R. Shevchenko, Maxim V. Shibalov, Ivan A. Filippov, Stepan D. Perov, Michael A. Tarkhov |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 21950 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2604.12814
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Low-confinement silicon nitride waveguides manufactured via direct glass bonding Mikhail V. Tsvetkov, Dmitry V. Obydennov, Alexandr S. Rykov, Alexandr R. Shevchenko, Maxim V. Shibalov, Ivan A. Filippov, Stepan D. Perov, Michael A. Tarkhov Abstract Reduction of the fabrication cost of the photonic integral circuits with low optical losses and technological simplicity are the key conditions for their widespread implementation. In conventional manufacturing methods, dielectric cladding thickness around waveguides usually limited to ∼ 20 \sim 20 μ \mu m, which complicates suppression of radiative losses and parasitic scattering. In this paper, we propose and experimentally demonstrate an alternative technology for forming low-confinement waveguides based on Borofloat 33 glass, based on thermal fusion bonding of two glass wafers. The waveguide pattern is formed in the following manner: trenches on the order of tens of nanometers are etched into the glass, then filled with silicon nitride, followed by removal of the excess layer and bonding, which ensures high-quality contact surfaces and a thick, symmetric dielectric cladding. As a proof of concept, we fabricated straight waveguides with a core height of 50 nm and widths from 1.3 to 3.5 μ \mu m. With butt coupling to standard SMF-28 single-mode fiber at a wavelength of 1550 nm, transmission of up to 60% was obtained, corresponding to input/output coupling losses of 1 dB per facet and consistent with numerical estimates. The proposed approach provides a low-cost and scalable route to fabricate low-confinement integrated photonic devices, promising for chips with simplified passive packaging and for devices based on long delay lines and ring resonators. Introduction Silicon nitride based integral photonics has become one of the key areas for application systems in the telecom range due to combination of wide spectral transparency munoz_silicon_2017 ; buzaverov_silicon_2024 , CMOS-compatibility moss_new_2013 ; romero-garcia_silicon_2013 and potentional low propagation losses Bauters2011SiN ; el_dirani_ultralow-loss_2019 ; liu_high-yield_2021 ; pfeiffer_ultra-smooth_2018 . However, optimal waveguide geometry (in particular, the degree of mode localization) it is determined by the trade-offs between losses, nonlinearity, thermostability, bending radius, and fiber interface requirements. In this work, we focus on low-confinement SiN x -waveguides, which are often implemented through an ultra-thin core and/or a large effective mode area. The primary engineering advantage of low-confinement geometries is the reduced losses due to sidewall roughness and fabrication fluctuations: a smaller fraction of the field is concentrated at the core-cladding interface, which weakens scattering on microscopic defects and facilitates achieving of ultra low losses under the same lithography and etching constraints. Early demonstrations of low-loss silicone nitride waveguides relied precisely on field delocalization and geometry optimization to minimize scattering, achieving loss levels on the order of several dB/m or below in the telecom window Tien2010 ; Bauters2011SiN . The second practical advantage is the larger effective mode area and, consequently, lower optical intensity at the same power, which increases the maximum power and reduces the impact of Kerr nonlinearity which is important for delay lines, high dynamic range filters, and external laser resonators Tien2010 . The third advantage is improved fiber coupling: a mode size close to that of the fiber enables reduced input/output losses and simplifies passive packaging, which is critical for application-specific circuits. Finally, low-confinement waveguides are often preferable for applications where key metrics are phase noise/intensity noise (via high-Q resonators and long delay lines) and scaling stability, including coherent telecom systems and microwave photonics Roeloffzen2013 ; Xiang2021 . Weak confinement increases the minimal bend radii (often to the centimeter scale), thereby increasing chip area and element footprint. Additionally, it reduces the flexibility of dispersion engineering and integration density compared to high-confinement platforms, where smaller bends are achievable at the cost of stricter requirements for roughness and width/height variations. From a practical standpoint, the low-confinement platform imposes the following requirements: low material losses-minimization of absorption (including that associated with N-H/Si-H bonds) and control of composition/defects, which typically requires high-temperature annealing Tien2010 ; Ji2021 ; geometric reproducibility regarding the control of ultrathin silicon nitride thickness and wafer-scale uniformity, because even small size variations can significantly alter the effective refractive index and phase delays in long structures; stress and cracking control: silicon nitride exhibits high intrinsic stress; known approaches include specialized patterns for crack stopping and stress partitioning Luke2013Stress ; Ji2021 ; and a high-quality lower/upper SiO 2 cladding (low roughness, low impurities) is required for low losses, along with minimization of optical interaction with potentially defective interfaces. The most common tecnhiques for fabricating such structures involve LPCVD deposition of silicon nitride followed by etching and SiO 2 cladding formation; the choice of waveguide geometry (thicknesses and widths) enables trade-offs between confinement, bend losses, and scattering Bauters2011SiN ; Tien2010 . To improve yield and control cracking in “thick” silicone nitride (often associated with high-confinement but technologically relevant for hybrid platforms as well), the Damascene process is widely used, where the waveguide is formed by filling pre-etched trenches followed by planarization, ensuring controlled stress and high Q-factors in microrings Pfeiffer2016Damascene . For long delay lines and high-Q resonators, polishing/planarization techniques (e.g., chemical-mechanical polishing (CMP)), optimization of plasma etching, and sidewall micro-roughness reduction are also critical Ji2021 . Fabrication methods that place the waveguide pattern between two high-quality SiO 2 layers are of special interest for low-confinement waveguides: they produce symmetric cladding, robust mechanical encapsulation, and minimized optical losses. In integrated photonics, this is typically achieved using oxide-to-oxide direct bonding (hydrophilic/fusion bonding) or plasma-activated direct bonding to reduce annealing temperature and time. Adhesive bonding (e.g. BCB) and metal-mediated methods are also used when material compatibility outweighs the need for ultralow optical losses Xu2020BondingReview . In photonic platforms, oxide-oxide bonding is a basic operation for multilayer integration (layer transfer and vertical transition formation), while maintaining low losses in waveguide regions Bauters2013SiOnSiN . In the context of “two glass wafers”, notable examples include wafer-bonded structures with thermally grown SiO 2 as high-quality cladding, demonstrating record-low propagation losses and detailed analysis of surface cleanliness/planarity requirements and annealing conditions Bauters2011WaferBonding . In practical implementation for silicone nitride chips, the typical process sequence usually includes formation of the lower SiO 2 layer (thermal oxide or PECVD/HDPCVD followed by planarization), deposition and patterning of SiN x , formation of the upper SiO 2 layer with surface treatment (CMP if necessary), surface activation (plasma/UV-ozone or chemical cleaning), and alignment and direct bonding, followed by low-/high-temperature annealing to enhance bond strength and optical homogeneity Xu2020BondingReview ; Bauters2013SiOnSiN . This approach yields a mechanically and thermally stable “sandwich” structure, convenient for further edge processing, integration with other layers, and wafer-scale scaling. For fabricating test samples of waveguide structures, it is worth mentioning femtosecond laser writing (FSLW) technology PhysRevApplied.22.064079 . This technology enables the creation of waveguide structures in various types of glass: amorphous silicon oxide Shah:05 , borosilicate glass chen_femtosecond-laser-written_2018 , phosphate glass Dong:13 , and various glass alloys 10.1117/1.1905363 . However, scaling this technology to industrial production is challenging. In this work, we present an alternative technology for obtaining low-confinement waveguides in Borofloat 33 glass, utilizing thermal bonding to fuse two glass surfaces. This approach allows reducing the minimum waveguide thickness to tens of nanometers, enables low-loss input from standard optical fiber ( \sim 1 dB per facet), and offers scalability for manufacturing. Chip manufacturing The fabrication of low-confinement SiN x waveguides with thermal bonding