Homogenization in one-dimensional higher-order non-local models of phase transitions
Fabrizio Caragiulo, Sergio Scalabrino, Edoardo Voglino · 2026
Read Homogenization in one-dimensional higher-order non-local models of phase transitions by Fabrizio Caragiulo, Sergio Scalabrino, Edoardo Voglino (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-12689.txt.
Introduction
Fabrizio Caragiulo and two colleagues study Cahn-Hilliard models with fractional derivatives. Higher-order derivatives replace standard ones, shaped by a wavy factor. Three regimes emerge from oscillation scale versus interface length. Convergence to a sharp-interface limit is proved in each regime. Extreme regimes show a separation effect. That marks the difference from local models. The work thus maps nonlocal limits across scales.
Catalog record
| CREATOR | Fabrizio Caragiulo, Sergio Scalabrino, Edoardo Voglino |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 99852 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2604.12689
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Homogenization in one-dimensional higher-order non-local models of phase transitions Fabrizio Caragiulo, Sergio Scalabrino, Edoardo Voglino Abstract We study the limit behavior of Cahn–Hilliard-type functionals in which the derivative is replaced by higher-order fractional derivatives and modulated by an oscillating factor. Depending on the ratio between the oscillation scale and the interface length, we identify three different regimes and prove Γ \Gamma -convergence in each regime to a suitable sharp-interface limit functional. In the extreme regimes, we prove a separation-of-scales effect that enables us to highlight the difference relative to the local models. 1 Introduction The gradient theory of phase transitions [ 23 , 24 , 29 , 32 ] studies the behavior of double-well energies perturbed by a gradient term, following models by van Der Waals, Cahn-Hilliard, and others [ 41 , 12 ] . This analysis can be translated in the computation of a \Gamma -limit F of functionals of the form F_{\varepsilon}(u)=\frac{1}{\varepsilon}\int_{\Omega}W(u)\,\mathrm{d}t+\varepsilon\int_{\Omega}|\nabla u|^{2}\mathrm{d}t. If W is a non-negative function with zeros exactly in -1 and 1 the domain of this \Gamma -limit can be identified with BV(\Omega;\{\pm 1\}) , where takes the form of a sharp-interface functional F(u)=m^{1}{\rm Per}(\{u=1\},\Omega), proportional to the perimeter of the set \{u=1\} in \Omega . The surface tension m^{1} can be described by a one-dimensional optimal-profile problem m^{1}=\inf\left\{\int_{-\infty}^{+\infty}(W(u)+|u^{\prime}|^{2})\,\mathrm{d}t:u\in H^{1}_{\rm loc}(\mathbb{R}),\,\lim_{t\to\pm\infty}u(t)=\pm 1\right\} (1) (see [ 23 ] ), which, by a scaling argument, shows that minimizers for \varepsilon>0 tend to develop a transition layer of scale \varepsilon around a limiting minimal interface. When an inhomogeneity is considered, either the double-well or the gradient term, or both, depend on the spatial variable. If this dependence is highly oscillatory, the outcome is a sharp-interface functional whose effective surface tension must be described by homogenization techniques. Usually, the inhomogeneity is modeled by introducing periodic coefficients depending on a small parameter \delta , which contributes to the form of the limit together with the small parameter \varepsilon . To describe the issues under examination, we consider the simple prototypical one-dimensional case F_{\varepsilon,\delta}(u)=\frac{1}{\varepsilon}\int_{0}^{1}W(u)\,\mathrm{d}t+\varepsilon\int_{0}^{1}a\Big(\frac{t}{\delta}\Big)|u^{\prime}|^{2}\mathrm{d}t, (2) with the 1 -periodic function a satisfying 0<\alpha\leq a\leq\beta<+\infty and W even. The behavior as \varepsilon,\delta\to 0 is described differently in three separate regimes. When \varepsilon\ll\delta , upon assuming the function a continuous (since interfaces converge to a point after scaling, this assumption removes unnecessary technicalities), the surface tension of the \Gamma -limit is m^{1}_{\infty}=\min\big\{\sqrt{a(\tau)}:\tau\in[0,1]\big\}m^{1}. (3) To explain formula ( 3 ), note that the term a(\frac{t}{\delta}) can be considered as equal to a constant a(\tau) , corresponding to some \tau\in[0,1] , at the scale \varepsilon of the internal boundary layer. Rewriting \displaystyle\hskip-28.45274pt\frac{1}{\varepsilon}\int_{0}^{1}W(u)\,\mathrm{d}t+\varepsilon\int_{0}^{1}a(\tau)|u^{\prime}|^{2}\mathrm{d}t (4) \displaystyle= \displaystyle\sqrt{a(\tau)}\Big(\frac{1}{\varepsilon\sqrt{a(\tau)}}\int_{0}^{1}W(u)\,\mathrm{d}t+\varepsilon\sqrt{a(\tau)}\int_{0}^{1}|u^{\prime}|^{2}\mathrm{d}t\Big), as a formal \Gamma -limit we obtain \sqrt{a(\tau)}\,m^{1}\#(S(u)) , with S(u) denoting the jump set of u . Note that, up to the factor \sqrt{a(\tau)} , this is the one-dimensional version of the sharp-interface limit when a is the constant 1 . The surface tension m^{1}_{\infty} is then obtained by optimization on \tau . This two-step process highlights a separation-of-scales effect : formally, we can first compute the \Gamma -limit for \varepsilon\to 0 , and then for \delta\to 0 . Conversely, if \delta\ll\varepsilon then the surface tension of the \Gamma -limit is m^{1}_{0}=\sqrt{\underline{a}}\,m^{1},\qquad\hbox{ with }\underline{a}=\Big(\int_{0}^{1}\frac{1}{a(\tau)}\mathrm{d}\tau\Big)^{-1} (5) denoting the harmonic mean of a . Again, this limit is formally obtained by first letting \delta\to 0 , obtaining a first homogenized \Gamma -limit F^{\rm hom}_{\varepsilon}(u)=\frac{1}{\varepsilon}\int_{0}^{1}W(u)\,\mathrm{d}t+\varepsilon\underline{a}\int_{0}^{1}|u^{\prime}|^{2}\mathrm{d}t, (see e.g. [ 7 ] ), from which we obtain ( 5 ) by arguing as in ( 4 ) and letting \varepsilon\to 0 . The remaining critical case is when \delta\sim\varepsilon ; that is, the inhomogeneity is at the same scale as the transition layer. In this case, there is no separation of scales, and the result depends on the ratio \delta/\varepsilon , which we may assume to converge to \lambda>0 . In this case, the formula ( 1 ) for the surface tension must be adapted to the inhomogeneous case. Substituting \delta with \lambda\varepsilon , a scaling argument gives the surface tension m^{1}_{\lambda}=\inf\Big\{\int_{-\infty}^{+\infty}\Big(W(u)+a\Big(\frac{t}{\lambda}\Big)|u^{\prime}|^{2}\Big)\,\mathrm{d}t:u\in H^{1}_{\rm loc}(\mathbb{R}),\lim_{t\to\pm\infty}u(t)=\pm 1\Big\}. The problem just described is a particular one-dimensional case of the model considered by Ansini et al. in an early paper [ 2 ] , where also the general higher-dimensional case is treated with some technical restrictions on the parameters \varepsilon and \delta . Related papers are those by Dirr, Lucia, and Novaga [ 20 , 21 ] , Cristoferi, Fonseca, and coworkers [ 14 , 15 , 16 ] , and Choksi et al. [ 13 ] . In particular, the methods in the papers by Cristoferi, Fonseca et al., also treating oscillations in the double-well part, allowed one to remove the restrictions in [ 2 ] . The papers [ 5 , 11 , 25 , 36 , 28 , 34 , 17 , 35 , 4 , 42 ] deal with related issues as well. We also mention the extension to the random case, for example in [ 22 , 30 ] . In this paper, we consider a prototypical case, when the gradient term is substituted by a nonlocal Gagliardo seminorm of arbitrary order. We only treat the one-dimensional case in order not to superpose the difficulties of the fractional setting with the technicalities due to homogenization issues for functionals defined on interfaces [ 1 ] (we refer to [ 18 , 9 ] for examples of treatment of fractional phase-transition problems in the higher-dimensional homogeneous case). We also deal with non-even W , for which positive jumps and negative jumps give different surface tensions, but we will omit this technicality from the introduction. The functionals we consider are of the form F_{\varepsilon,\delta}(u)=\frac{1}{\varepsilon}\int_{0}^{1}W(u)\,\mathrm{d}x+\varepsilon^{2(k+s)-1}\int_{0}^{1}\int_{0}^{1}a\Big(\frac{x}{\delta},\frac{y}{\delta}\Big)\frac{|u^{(k)}(x)-u^{(k)}(y)|^{2}}{|x-y|^{1+2s}}\mathrm{d}x\,\mathrm{d}y, (6) defined on the fractional Sobolev space H^{k+s}((0,1)) , with k\in\mathbb{N} , s\in(0,1) and k+s>1/2 . We mention that the critical case k=0 and s=\frac{1}{2} will be addressed in [ 8 ] , with different methods and results, due to the logarithmic degeneracy. The function a is 1 -periodic in each variable, and it is not restrictive to suppose it is symmetric. In the case a=1 , the \Gamma -limit of such functionals has been computed by Savin and Valdinoci [ 38 ] (see also [ 37 ] ) in the case k=0 and by Solci [ 39 ] in the general case, and gives a sharp-interface limit with surface tension \displaystyle\hskip-28.45274ptm^{k+s}=\inf\Big\{\int_{-\infty}^{+\infty}W(u)\,\mathrm{d}x+\int_{-\infty}^{+\infty}\int_{-\infty}^{+\infty}\frac{|u^{(k)}(x)-u^{(k)}(y)|^{2}}{|x-y|^{1+2s}}\mathrm{d}x\,\mathrm{d}y: \displaystyle\hskip 170.71652ptu\in H^{k+s}_{\rm loc}(\mathbb{R}),\lim_{t\to\pm\infty}u(t)=\pm 1\Big\} described by a fractional optimal-profile problem . The asymptotic analysis of the functionals in ( 6 ), even if presenting the same three separate regimes, brings about significant differences from that of functionals in ( 2 ). By comparison with the results in [ 39 ] , the domain is BV((0,1);\{\pm 1\}) , and we prove that the limits are still sharp-interface functionals. The behavior of the functionals F_{\varepsilon,\delta} is again described by their surface tensions. In the subcritical regime , assuming that the function a is continuous, we obtain that the surface tension of the limit functional is m^{k+s}_{\infty}=a_{\inf}^{1/(2(k+s))}m^{k+s},\quad\hbox{ with }a_{\inf}=\min\big\{a(\tau,\tau):\tau\in\mathbb{R}\big\}. (8) Formula ( 8 ) highlights the additional concentration on the diagonal x=y , beside the separation of scales also present in the gradient case. This can be understood as a concentration of the transition layer on a scale \varepsilon , with \varepsilon\ll\delta , so that the term a(\frac{x}{\delta},\frac{y}{\delta}) can be considered