Enhanced quantum illumination of a lossy target: A sequential interaction model Preprint: AIP/123-QED

Shilpi Srivastava, Shubhrangshu Dasgupta · 2026

Read Enhanced quantum illumination of a lossy target: A sequential interaction model Preprint: AIP/123-QED by Shilpi Srivastava, Shubhrangshu Dasgupta (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-12381.txt.

Introduction

Shilpi Srivastava and Shubhrangshu Dasgupta test quantum illumination against a realistic lossy target. It uses entangled light to spot faint targets in noise. The target sits at its own temperature, apart from its surroundings. The signal meets noise first, then the target. Each step is modeled as a beam splitter. Entangled squeezed light beats the best classical light on signal-to-noise ratio. It also gives a lower error bound for dim targets. The result bears on quantum radar and lidar.

Catalog record

CREATORShilpi Srivastava, Shubhrangshu Dasgupta
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE35079
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2604.12381

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Enhanced quantum illumination of a lossy target: A sequential interaction model Preprint: AIP/123-QED Shilpi Srivastava, Shubhrangshu Dasgupta Abstract The effectiveness of quantum illumination (QI) of a lossy target is investigated in a realistic setting in which the signal sequentially interacts with a noisy environment and the target. The target is considered at a temperature distinct from its surroundings, while both the interactions are modeled as an action of independent beam splitters with different reflectivities. The detection performance is quantified using the signal-to-noise ratio (SNR) and the quantum Chernoff bound (QCB), the latter providing an upper bound on the error probability. The performance of the Gaussian two-mode squeezed state (TMSS) is compared with that of the optimal classical protocol based on coherent states (CS). The proposed model shows that TMSS consistently achieves a higher SNR than CS for a low-reflectivity target and an arbitrary phase change and remains robust against thermal noise. Furthermore, a sufficiently lower QCB is obtained for TMSS than in previously reported results, indicating greater distinguishability between the presence and absence of the target. These findings underscore the role of realistic modeling in improving QI-based detection of lossy targets, with potential relevance to quantum radar and lidar systems. I Introduction In classical illumination (CI) of an object, one relies on the optical phenomenon that a classical beam of light undergoes. The quantum illumination (QI) 24 has emerged as a paradigmatic shift in such a visual sensing protocol, which harnesses entanglement to detect the presence of an object immersed in a noisy thermal environment. The basic idea involves preparing a pair of entangled optical modes, where one mode, the signal, is sent to irradiate the target region while the other mode, the idler, is stored locally. Upon the return of the signal, a joint measurement on the signal-idler system is performed to infer the presence or absence of the desired target. In contrast to CI, which relies solely on the signal mode, quantum correlations between the two modes enable more reliable discrimination of the target’s presence, either through enhanced detection accuracy or reduced resource requirements 35 ; 32 ; 38 ; 34 . This technique has also been implemented for the probes in the microwave frequency region 3 ; 4 , which is highly relevant for applications in quantum radar and lidar 5 ; 19 ; 22 ; 36 ; 37 ; 40 ; 39 ; 31 . Quantum radar and quantum lidar enable the detection of weakly reflecting or cloaked targets 23 ; 10 that are otherwise difficult to resolve using classical illumination schemes. In QI, the Gaussian two-mode squeezed state (TMSS) 38 has emerged as a prominent candidate, and the QI protocol has been demonstrated experimentally using such states 12 ; 25 ; 44 . Notably, the associated advantage persists even when the entanglement between the signal and idler modes is completely degraded by environmental noise 32 ; 43 ; 42 . Although entanglement is widely regarded as the primary resource responsible for quantum advantage, it has been shown that it is not the sole contributor to the robustness of quantum illumination 20 . In particular, the persistence of the advantage even in regimes where entanglement is destroyed has been attributed to other forms of quantum correlations, such as quantum discord 41 ; 6 . Beyond the TMSS, various non-classical states have been investigated, including asymmetrically squeezed two-mode states,high-dimensional Bell states, and non-Gaussian states obtained via photon addition and subtraction of the TMSS 17 ; 28 ; 11 ; 14 . In certain regimes, these states are found to yield lower error probabilities than the Gaussian TMSS. However, the TMSS remains the optimal resource when constraints are imposed on the signal energy. These states have further been analyzed under various types of noise and experimental imperfections 14 , providing deeper insight into their practical performance. However, these studies rely on simplified models of interaction with the target and the environment, underscoring the importance of developing more refined models for practical quantum sensing applications. Recent efforts have focused on incorporating more realistic features into the QI framework. For instance, the effect of target absorption has been modeled using lossy beam splitters 13 , revealing that absorption can, perhaps unexpectedly, enhance detection efficiency. Alternative detection scenarios have also been explored, such as phase-shift-based target identification in cloaked environments, where quantum correlations can lead to improved signal-to-noise ratios (SNRs) compared to classical approaches 23 . In addition, the effectiveness of QI is typically quantified using several key metrics, including the signal-to-noise ratio (SNR) 25 ; 23 , the minimum error probability given by the Helstrom limit 16 ; 26 and the quantum Chernoff bound 8 ; 27 ; 30 ; 18 ; 1 , and quantum estimation approaches based on the quantum Fisher information (QFI) 29 ; 33 . Despite these advances, most existing models treat the interaction of the signal with the environment and the target in an effectively combined manner. In particular, some approaches consider only the mixing of thermal noise with the signal while modeling the target as perfectly reflective 23 . Others incorporate target absorption by modeling it as a beam splitter (BS), but include environmental noise only through one input port, effectively neglecting the intrinsic thermal contribution of the target by assuming it to be in equilibrium with the surrounding environment 13 ; 14 . Such assumptions may not adequately capture realistic physical conditions. In a more realistic scenario, the signal’s interactions with the environment and with the target should be treated as distinct processes, since the target may neither be perfectly reflective nor necessarily at the same temperature as the surrounding environment. In our work, we propose a model in which the signal first interacts with the environment and subsequently with the target, each described by independent beam splitters with different reflectivities. In addition, the thermal modes associated with the environment and the target should be treated separately, each characterized by its own average photon number. Within this generalized framework, we analyze and compare the performance of CI and QI for detecting phase shifts induced by the target, using SNR as the primary metric. We also evaluate the error probability in detecting the absence and presence of the target through QCB. For the classical case, we employ a coherent state (CS), which can be regarded as the best classical resource. In the quantum setting, we consider the Gaussian TMSS as the standard benchmark. This paper is organized in the following manner. In Sec. II.1 and Sec. II.2 , we introduce the proposed model and the corresponding mathematical framework for evaluating the SNR and QCB, respectively, for both classical and quantum protocols. In Sec. 3 and Sec. IV , we then present a comparative analysis of the considered states based on these two performance metrics. We conclude the paper in Sec. V . II Model and performance measures We compare the performance of CI and QI schemes for a partially reflecting target, following the methodology outlined in 23 ; 11 . The schematic representations of both protocols are shown in Fig. 1 . The key difference between the two protocols lies in the use of an idler beam in QI. II.1 The CI protocol (a)

Read the complete text