Joint Trajectory and Resource Optimization for Aerial RIS-assisted Integrated TNT Networks

Vangara Saiprudhvi, Sandeep Singh, Keshav Singh, Hariharan Subramaniyam, Chih-Peng Li · 2026

Read Joint Trajectory and Resource Optimization for Aerial RIS-assisted Integrated TNT Networks by Vangara Saiprudhvi, Sandeep Singh, Keshav Singh, Hariharan Subramaniyam, Chih-Peng Li (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-12283.txt.

Introduction

Saiprudhvi and four colleagues jointly tune precoders, surface phase shifts, and 3D flight paths for a dual-aerial reconfigurable surface network joining ground and satellite users for sixth-generation wireless. A ground station and a satellite serve their users with UAV- and HAP-mounted surfaces. Block coordinate descent combines precoding by weighted minimum mean square error, phase tuning by Riemannian conjugate gradient, and path tuning by successive convex approximation, converging to a stationary point. Tests show about 7.05 percent higher average sum-rate than the random scheme.

Catalog record

CREATORVangara Saiprudhvi, Sandeep Singh, Keshav Singh, Hariharan Subramaniyam, Chih-Peng Li
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE83163
LICENSEhttp://creativecommons.org/licenses/by-sa/4.0/
RIGHTSCC BY SA
SOURCEarXiv

Source: https://arxiv.org/abs/2604.12283

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Joint Trajectory and Resource Optimization for Aerial RIS-assisted Integrated TNT Networks Vangara Saiprudhvi, Sandeep Singh, Keshav Singh, Hariharan Subramaniyam, Chih-Peng Li Abstract Integrated terrestrial and non-terrestrial networks (ITNTNs) are regarded as a key architectural paradigm for sixth-generation (6G) wireless systems. This paper investigates a dual-aerial reconfigurable intelligent surface (RIS)-assisted ITNTN, where a terrestrial base station (TBS) and a satellite (SAT) jointly serve terrestrial and satellite users with the aid of an unmanned aerial vehicle (UAV)-mounted RIS and a high-altitude platform (HAP)-mounted RIS. We formulate an average sum-rate maximization problem by jointly optimizing the TBS and SAT precoders, the RIS phase shift matrices, and the three-dimensional trajectories of the UAV and the HAP, subject to transmit power, unit-modulus, and mobility constraints. The resulting optimization problem is highly non-convex due to the strong coupling among the transmit precoders, RIS phase shifts, and aerial platform mobility. To efficiently address this challenge, we propose a block coordinate descent (BCD) framework that integrates weighted minimum mean square error (WMMSE) optimization for precoder design, a manifold-based Riemannian conjugate gradient (RCG) method for RIS phase-shift optimization, and successive convex approximation (SCA) for trajectory optimization. The proposed algorithm is shown to converge to a stationary point. The simulation results show that the proposed joint design achieves an approximately 7.05 % 7.05\% higher average sum-rate compared to the random RIS scheme, highlighting the effectiveness of dual-aerial RIS deployment and joint communication-mobility optimization in ITNTNs. I Introduction Sixth-generation (6G) wireless communication systems are envisioned to fundamentally transform network architectures and enabling technologies by supporting global, seamless, and reliable connectivity [ 17 ] . In this context, integrated terrestrial and non-terrestrial networks (ITNTNs) have emerged as a promising paradigm to complement conventional terrestrial infrastructure by incorporating non-terrestrial platforms such as satellites, high-altitude platforms (HAP), and unmanned aerial vehicles (UAV) [ 16 , 34 , 26 ] . By jointly exploiting terrestrial and non-terrestrial resources, ITNTNs can extend coverage to remote and underserved areas in dense urban environments, and improve network resilience in emergency and disaster scenarios [ 14 ] . Despite their advantages, ITNTNs face several critical challenges that require careful consideration, including dynamic resource allocation, interference management, coordinated spectrum utilization, and efficient network coordination among platforms operating at different altitudes levels [ 9 ] . Reconfigurable intelligent surfaces (RIS), composed of nearly passive and programmable electromagnetic elements, have recently attracted significant attention due to their ability to manipulate wireless propagation environments by dynamically adjusting the phase and amplitude of reflected signals [ 27 ] . By intelligently configuring RIS phase shifts, wireless channel conditions can be enhanced without relying on additional active radio-frequency chains. Integrating RISs with UAV as relays utilizes the mobility of UAV for flexible RIS deployment and utilizes RIS passive elements for signal reflection and regulation without additional power supply [ 13 ] . Compared with conventional UAV relays or static RIS-assisted systems, UAV-mounted RIS (UAV-RIS) architectures can achieve improved spectral efficiency with reduced energy consumption [ 20 , 5 ] . In parallel, HAP-mounted RIS (HAP-RIS) has recently emerged as a complementary aerial RIS solution. Due to their quasi-stationary operation at high altitudes and wide coverage footprint, HAP-RIS platforms offer enhanced link stability and persistent large-scale coverage, which makes them particularly attractive for satellite-assisted communications [ 6 , 7 ] . Although UAV-RIS emphasizes mobility and local adaptability, HAP-RIS provides long-term coverage continuity and reduced signaling overhead. The joint deployment of RIS on both UAV and HAP, therefore, enables a dual-aerial RIS architecture that can simultaneously support flexible local coverage enhancement and stable long-range signal reflection within ITNTNs. TABLE I : Comparison of other works with the proposed work References Parameter Beamforming Optimization UAV Optimization HAP Optimization Optimization Objective Optimization Method Network type Ref. [ 13 ] Both active and passive beamforming Fixed line trajectory - Sum-rate maximization FP-manifold Terrestrial network Ref. [ 20 ] Both active and passive beamforming 2D UAV trajectory - Energy efficiency maximization SDR, SROCR and SCA Terrestrial network Ref. [ 4 ] Both active and passive beamforming 2D UAV trajectory - Secrecy-rate maximization S-procedure, SCA and DC Terrestrial network Ref. [ 32 ] Both active and passive beamforming Not optimized - Weighted sum-rate maximization RoBl Terrestrial network Ref. [ 24 ] Both active and passive beamforming 3D UAV trajectory - Weighted sum-rate maximization DDQN Terrestrial network Ref. [ 30 ] Both active and passive beamforming 3D UAV trajectory - Sum-rate maximization, UAV energy minimization SD3 and GNN Terrestrial network Ref. [ 18 ] Both active and passive beamforming Euler angles-based UAV control scheme - Sum-rate maximization SAC-PER Terrestrial network Ref. [ 33 ] Both active and passive beamforming 3D UAV trajectory - Maximizing the minimum ergodic rate Alternating optimization Non-Terrestrial network Ref. [ 10 ] - - Circular trajectory Channel gain maximization Pareto optimal method Non-Terrestrial network Proposed work Both active and passive beamforming 3D UAV trajectory 3D HAP trajectory Average sum-rate maximization WMMSE, manifold- based RCG and SCA ITNTN I-A Related Work RIS-assisted communication systems have been extensively investigated in recent years. Early works primarily focused on fixed terrestrial RIS deployments, where transmit beamforming and RIS phase shifts are jointly optimized to enhance coverage and spectral efficiency under static channel conditions. Although these studies demonstrate the potential of RIS-assisted communications, their applicability is limited in highly dynamic non-terrestrial environments. To improve deployment flexibility, UAV-RIS systems have received increasing attention. Existing UAV-RIS studies mainly consider joint optimization of transmit beamforming, RIS phase shifts, and UAV trajectories for terrestrial communication scenarios. Various performance objectives have been explored, including sum-rate maximization, secure communication, robustness to channel uncertainty, and energy efficiency, using techniques such as block coordinate descent (BCD), successive convex approximation (SCA), and learning-based methods [ 21 , 4 , 32 , 24 , 30 , 33 , 18 ] . However, these studies typically focus on a single aerial RIS platform and do not consider the coexistence of terrestrial and satellite users within an integrated network framework. More recently, HAP-RIS systems have been studied as an alternative aerial RIS solution. The existing literature on HAP-RIS mainly investigates coverage enhancement, link budget analysis, or RIS phase shift optimization for terrestrial or satellite communications. These studies indicate that HAP-RIS can achieve better performance compared to UAV-RIS in large-scale coverage scenarios and is particularly suitable for satellite-assisted communications [ 10 , 15 , 8 ] . Nevertheless, most of the previous works assumes fixed or predictable HAP positions and does not consider joint optimization of beamforming, RIS configuration, and aerial mobility. A few recent studies have explored hierarchical or multi-layer aerial architectures involving both UAV and HAP, mainly from a network architecture or coverage perspective [ 11 , 31 ] . However, these works focus on user association or coverage partitioning and do not address joint physical-layer optimization. In particular, the strong coupling between terrestrial-satellite beamforming, RIS phase shifts, and the three-dimensional (3D) mobility of both UAV and HAP has not been explicitly investigated in the current literature, as shown in Table I . I-B Motivation and Contributions Despite the promising potential of aerial RIS-assisted ITNTN, the joint design of dual-aerial RIS-assisted ITNTNs remains largely unexplored. Most existing studies focus on a single aerial RIS, e.g., either a UAV-RIS or a HAP-RIS, and typically assume

Read the complete text