Multi-Axis Additive Manufacturing for Customized Automotive Components

2026

Read Multi-Axis Additive Manufacturing for Customized Automotive Components (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-12236.txt.

Introduction

Muhammad and Liu improve multi-axis digital light processing for printing curved automotive parts without wasteful supports. Tilting a robotic arm to cure resin at varied angles creates non-uniform layer thickness, which old systems handle by splitting layers and adding time and supports. Their variable exposure method instead divides layers into sublayers and tunes ultraviolet duration to local thickness via a cure-depth equation, cutting layer counts, print time, and supports.

Catalog record

YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE26278
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2604.12236

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Multi-Axis Additive Manufacturing for Customized Automotive Components Abstract The reproduction of automobile components through additive manufacturing presents significant geometric challenges, as many automotive parts feature complex, organically shaped surfaces that are difficult to fabricate accurately using conventional 3D printing approaches without wasteful support structures. Multi-axis Digital Light Processing (DLP) 3D printing addresses this by orienting a robotic arm to cure resin layers at varying angles and positions, enabling the fabrication of geometries that fixed-axis systems cannot reliably reproduce. However, this flexibility introduces a key challenge: layers printed at non-orthogonal orientations exhibit non-uniform thickness across their cross-section, which traditional DLP systems cannot accommodate without subdividing the layer, increasing total layer count, print time, and the need for supporting structures. This paper introduces a variable exposure method to address this challenge. Rather than splitting a non-uniform layer into multiple uniform ones, our approach divides each layer into sublayers and modulates the UV illumination duration for each sublayer proportionally to its local thickness. This is governed by an established cure-depth equation relating exposure time to material penetration depth, allowing precise control over curing without additional hardware. The result is a meaningful reduction in total layer count for printed objects. Fewer layers directly translates to faster print times and a reduction in wasteful support structures. Our contribution is a practical and low-overhead extension to existing multi-axis DLP pipelines that improves print efficiency without sacrificing geometric accuracy, with clear applications in the rapid prototyping and reproduction of automotive components. \ConfName Proceedings of the ASME 2026Global Transportation and Power Systems Summit \ConfAcronym DRIVN2026 \ConfDate September 14–16, 2026 \ConfCity Detroit, MI \PaperNo DRIVN2026-191681 \SetAuthors Uzair Aziz Muhammad,Zheng Liu \CorrespondingAuthor [email protected] \SetAffiliation 1Department of Computer and Information Science, University of Michigan-Dearborn, Dearborn, Michigan, USA \SetAffiliation 2Department of Industrial and Manufacturing Systems Engineering, University of Michigan-Dearborn, Dearborn, Michigan, USA keywords Additive manufacturing, digital light processing, multi-axis, vat photopolymerization {nomenclature} \entry M=(V,F) Triangle mesh with vertex set V and face set F \entry N Number of layers \entry k Layer index \entry \phi(x,y,z) Scalar field over mesh vertices \entry \phi_{min},\phi_{max} Scalar field range bounds \entry iso_{k} Iso-value of layer k \entry P_{k} Polyline contours for layer k \entry S_{k} Set of edge-crossing segments for layer k \entry \varepsilon Intersection epsilon tolerance \entry \delta_{weld} Point welding tolerance \entry \alpha Linear interpolation parameter for edge crossings \entry A Warped- z field amplitude \entry c_{x},c_{y} Warped- z field cycle parameters \entry \hat{x},\hat{y} Bounding-box normalized coordinates \entry \mathbf{c} Center point for radial scalar field \entry C_{d} Cure depth \entry D_{p} Penetration depth of the resin \entry H_{e} Photoexposure dose \entry H_{0} Critical photoexposure dose required to initiate polymerization \entry I_{0} Peak irradiance of the projector \entry t_{e} Exposure time \entry u,v Normalized projector pixel coordinates \entry h(u,v) Target cure depth at pixel (u,v) \entry I(u,v) Effective irradiance at pixel (u,v) \entry G(u,v) Grayscale command at pixel (u,v) \entry W,H Cure mask width and height in pixels \entry N_{exp,k} Number of interior (exposed) pixels in layer k \entry N_{sat,k} Number of saturated pixels in layer k \entry p Projector pixel pitch [mm/pixel] \entry A_{k} Physical exposed area of layer k \entry \sigma_{k} Saturation ratio for layer k 1 Introduction The automotive industry increasingly demands fabrication methods capable of producing complex, geometrically intricate components with minimal waste and reduced lead times. Traditional subtractive manufacturing processes, while mature and reliable, struggle to accommodate the organic surfaces and internal geometries common in modern automotive part design without significant material loss and tooling overhead. Additive manufacturing (AM) has emerged as a compelling alternative, enabling the direct fabrication of complex geometries layer by layer from digital models [ 11 ] . Its ability to support rapid prototyping and on-demand production makes it particularly well-suited for automotive applications, where design iteration and part customization are frequent requirements [ 3 ] . Among the various AM technologies available, Digital Light Processing (DLP) 3D printing stands out for its combination of high resolution and rapid fabrication speed. Unlike filament-based methods such as Fused Deposition Modeling (FDM), DLP cures entire cross-sectional layers of photopolymer resin simultaneously using a projected UV light source, enabling fast and precise deposition. However, conventional DLP systems rely on a fixed, planar build orientation, which limits their ability to fabricate overhanging geometries without the use of wasteful support structures [ 6 ] . These supports increase material consumption, extend post-processing time, and compromise surface quality upon removal, all significant drawbacks in a manufacturing context [ 10 , 12 ] . To address these limitations, researchers have explored multi-axis approaches in AM more broadly. Multi-axis FDM systems have demonstrated the ability to reduce or eliminate support structures by dynamically reorienting the print head or build platform during fabrication [ 2 ] . Fang et al. [ 4 ] introduced a computational framework for multi-axis FDM that decomposes a solid model into a sequence of collision-free working surfaces, generating toolpaths that align filaments along stress directions for improved mechanical performance. Further advances in multi-axis FDM have explored curved-layer slicing and volume decomposition strategies to improve both surface quality and structural integrity. Feng et al. [ 5 ] developed a curved-layer material extrusion framework coupling conformal surface offsetting with geodesic distance-based toolpath generation, enabling support-free deposition on thin, freeform shells. Bi et al. [ 1 ] proposed a volume decomposition method for multi-directional FDM that jointly optimizes mechanical strength and support-free manufacturability, validated through FEA simulations and multi-axis printing experiments. Geodesic field-based approaches [ 8 ] have similarly been applied to enable support-free fabrication on multi-axis platforms. However, these algorithms are designed around the continuous extrusion mechanics of FDM and cannot be directly transferred to DLP printing, which relies on discrete, planar layer exposures rather than continuous toolpaths. The integration of multi-axis platforms with DLP printing introduces unique challenges that existing FDM-based frameworks do not address. When the build platform is dynamically reoriented, sliced layers are no longer uniformly thick, regions of the same layer may require different depths of cure depending on local geometry. Conventional DLP systems apply a uniform exposure time per layer, which is insufficient to accurately cure layers of non-uniform thickness. While Liu et al. [ 9 ] established a foundational framework for multi-axis DLP printing, including a modified slicing algorithm adapted from Fang et al. [ 4 ] , a Beer-Lambert-based cure depth model, and a collision-free path planning algorithm, the generation of spatially resolved cure maps for non-uniform layers was not fully addressed. This paper builds upon that framework by focusing specifically on the computation of per-layer cure maps. Given a sliced layer with spatially varying thickness, we calculate the required UV exposure at each point across the layer cross-section, producing a cure map that drives the DLP projector to achieve accurate curing depth throughout. This approach enables precise fabrication of geometrically complex layers without increasing layer count, and is demonstrated on a set of representative 3D models with application toward the reproduction of automotive components. 2 Methodology 2.1 Key Contribution The primary contribution of this work is the generation of spatially resolved cure maps for non-planar layers produced by a multi-axis DLP slicing pipeline. While prior work [ 4 ] established the broader framework for multi-axis DLP printing, the computation of per-pixel grayscale exposure masks, which

Read the complete text