Filtering hits for speeding up online track reconstruction at hadron colliders
Andrea Coccaro, Carlo Schiavi, Alessandro Zaio · 2026
Read Filtering hits for speeding up online track reconstruction at hadron colliders by Andrea Coccaro, Carlo Schiavi, Alessandro Zaio (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-11648.txt.
Introduction
Coccaro, Schiavi, and Zaio present a hit filter to speed online track reconstruction at hadron colliders. Trigger systems must judge collision products fast, and rebuilding charged-particle paths in inner detectors is combinatorial, with run time growing with pile-up. The High-Luminosity LHC upgrade will raise hit counts and swell costs. Their convolutional-neural-network filter drops unneeded detector data and runs easily on accelerator cards. The paper covers the filter, weighs its impact, and discusses next steps.
Catalog record
| CREATOR | Andrea Coccaro, Carlo Schiavi, Alessandro Zaio |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 23804 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2604.11648
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Filtering hits for speeding up online track reconstruction at hadron colliders Andrea Coccaro, Carlo Schiavi, Alessandro Zaio Abstract Collider experiments are equipped with trigger systems that rapidly inspect the physics content emerging from collisions to decide whether the resulting products are worth saving for later analysis. One crucial aspect for analyzing the final states originating from the collisions is to process the information produced by charged particles in the innermost detectors to reconstruct the corresponding trajectories. This task is a challenge for the experiments running at the Large Hadron Collider (LHC) at CERN because of the large number of secondary collisions per bunch crossing, the so-called pile-up vertices, giving rise to extremely high hit occupancies in the detector layers close to the beam line. Reconstructing tracks is a combinatorial problem and its processing time strongly depends on the average pile-up per event. The future accelerator-complex upgrade to the High-Luminosity LHC, implying even higher detector occupancies, will result in a considerable growth of the computational cost of the current trigger strategies. To face this issue, a new technique for assisting track reconstruction by filtering out unnecessary detector information is presented and characterized in this work. The algorithm is based on a convolutional-neural-network architecture which can be easily deployed on accelerator cards. The impact of this approach is assessed and future prospects are also discussed. Keywords : particle physics; trigger and data acquisition system; hit filtering; machine learning; fast inference. 1 Introduction Experimental particle physics studies the fundamental particles and forces that make up the universe by using high-energy accelerators, such as the LHC [ 1 ] , and detectors, such as ATLAS [ 2 ] and CMS [ 3 ] . At the LHC, interesting events from the proton-proton collisions are rare and the ATLAS and CMS experiments are equipped with sophisticated trigger systems for collecting and filtering detector data from the initial collision rate of \mathcal{O} (40 MHz) to \mathcal{O} (1 KHZ) for further physics inspection and analysis [ 4 , 5 , 6 ] . Events are selected by a two-level trigger system. While the first level operates using custom hardware connected to the calorimeters and the muon spectrometer, the second software-based level also processes information from the highly-granular inner tracking detector, enabling a more comprehensive suite of particle reconstruction and identification tools. The inner tracking detector records hits from charged particles and its data volume is extremely large. The reconstruction of tracks from these hits represents one of the most CPU-time consuming tasks operating at the trigger level [ 7 ] . It is so computationally expensive because of the intrinsic combinatorial nature of the algorithm, and because of the high-density environments with many particles and detector layers. When the LHC runs at its highest operation intensities, the mean number of simultaneous collisions per bunch crossing goes to \sim 70 but with the upcoming High-Luminosity LHC (HL-LHC) upgrades the instantaneous luminosity is expected to increase from 1 to 7.5\times 10^{34} cm -2 s -1 and pile-up from the current 50–70 up to 150–200 [ 8 ] . At the HL-LHC, the current track reconstruction approach at the trigger level becomes prohibitive because of the higher detector occupancy and the higher number of readout channels of the upgraded detectors [ 16 , 17 ] . New proposals to mitigate the computational timing cost, also based on machine-learning advancements, recently appeared in literature [ 9 , 10 , 11 ] . In addition, heterogeneous computing offers an interesting path of further investigation, in particular both GPU-based and FPGA-based accelerations are a promising option for the data acquisition systems of future particle-physics experiments [ 12 , 13 , 14 , 15 ] . In this context, the work presented in this manuscript introduces a novel approach for filtering the hit information prior to any reconstruction task. The filter acts on the reconstructed hits by classifying them according to the probability of being associated to a particle originating from the hard-scatter primary vertex or from a pile-up collision or other background sources. The usefulness of this approach is demonstrated by characterizing its performance on synthetic data mimicking the LHC environment and the ATLAS tracking detector. It is demonstrated that the number of hits entering a track reconstruction algorithm can be substantially reduced, and so the processing-time footprint, without sacrificing the physics output. Moreover, the adopted algorithm, based on a rather simple convolutional neural-network architecture, allows an easy deployment on both GPU and FPGA accelerator cards, enabling fast inference on heterogeneous computing to be further explored. The data generation is described in Section 2 , the filtering algorithm and its performance are presented in Section 3 , while additional robustness studies are detailed in Section 4 . 2 Synthetic dataset Synthetic data is generated with a custom event generator simulating a cylindrical detector consisting of eight concentric layers. Its geometry is based on the barrel part of the inner detector of the ATLAS experiment, and with the four layers matching the pixel detector and the outer four layers the strip detector. A solenoidal magnetic field, aligned with the beam axis and as in the ATLAS experiment, is also emulated. A right-handed coordinate system is adopted with the origin at the nominal interaction point (IP) in the center of the detector and the z -axis along the beam pipe. The x -axis points from the IP to the center of the LHC ring while the y -axis points upwards. The azimuthal angle \varphi is defined around the z -axis and the polar coordinates (r,\varphi) in the transverse plane. Experimental resolution effects are taken into account by smearing the \varphi and z coordinates of the simulated hits taking into account the precision of the emulated detector sensors, while the r coordinate is assumed to be known perfectly. The applied gaussian smearing values are summarized in Table 1 . The hit density per layer in simulated events with jets originating from t\bar{t} quark pairs within the ATLAS experiment is extracted for different pile-up settings and emulated in the synthetic data [ 17 ] . pixel detector r \sigma(\varphi) [ \mu m] \sigma(z) [mm] strip detector r \sigma(\varphi) [ \mu m] \sigma(z) [mm] layer 0 50 0.25 layer 4 130 2 layer 1 50 0.4 layer 5 130 2 layer 2 50 0.4 layer 6 130 2 layer 3 50 0.4 layer 7 130 2 Table 1 : Standard deviations of the gaussian smearing applied to the generated hits in the simulated datasets. These values match the spatial dimensions and the typical related resolutions of the active sensors of the pixel and strip detectors of the ATLAS experiment. Figure 1 : Three-dimensional display of a generated event and projections in the (x,y) and (y,z) planes. The event contains a single high-momentum track with p_{\text{T}}=39.5 GeV and a detector hit density due to secondary collisions from an event with a pile-up of 25. The hits are colored according to their truth nature: black for hits from pile-up particles, orange for hits from random noise and green for hits from the high-momentum signal particle. The beamline, in the three-dimensional and (y-z) plane, or the beamspot, in the (x,y) plane, is also shown in gray. For a better visualization, the