Multi-fluid multi-species models for inverse FIP-effect

Juan Martinez-Sykora, Paola Testa, Deborah Baker, Bart De Pontieu · 2026

Read Multi-fluid multi-species models for inverse FIP-effect by Juan Martinez-Sykora, Paola Testa, Deborah Baker, Bart De Pontieu (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-11647.txt.

Introduction

Martínez-Sykora and three colleagues investigate the inverse First Ionization Potential effect, a rare solar-atmosphere anomaly in chemical fractionation. Using simple 1D multi-fluid MHD models that solve the equations with multi-fluid and multi-species effects, they explore where the inverse effect could occur. For upward Alfvén waves, a negative ponderomotive force arises when field strength and flux-tube expansion with height offset dissipation and damping from multi-fluid interactions. The study clarifies what could drive this rare fractionation.

Catalog record

CREATORJuan Martinez-Sykora, Paola Testa, Deborah Baker, Bart De Pontieu
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE18398
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2604.11647

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Multi-fluid multi-species models for inverse FIP-effect Juan Martinez-Sykora, Paola Testa, Deborah Baker, Bart De Pontieu Abstract The inverse First Ionization Potential (FIP) effect is rarely observed in the solar atmosphere, and this anomaly poses a challenging problem in understanding physical processes driving this chemical fractionation. In this work, we investigate various scenarios where the inverse FIP effect could occur using simplified 1D multi-fluid MHD models. The model treats the full MHD equations with multi-fluid and multi-species effects, rather than using wave analysis to derive the ponderomotive force and semi-empirical 1D models. In the parametric study considered here, for upward Alfvén waves, one can achieve a negative (opposite) ponderomotive force when the magnetic field strength and the magnetic flux tubes’ expansion with height counteract the dissipation and damping effects from multi-fluid interactions. I Introduction Abundances vary across the solar atmosphere and stellar types (e.g., 22 ; 14 ; 21 ). The abundance variation in the solar corona and wind has been strongly connected to the slow and fast solar wind 10 , the magnetic field topology, and upflows 6 . Therefore, understanding the mechanisms that change abundances will provide insight into the drivers of solar/stellar activity and the solar/stellar winds. For later spectral types (G K M), the dependence of the abundances on the First Ionization Potential (FIP) decreases, and at about K5, an inverse FIP (iFIP) effect is often observed 26 ; 20 . High magnetic activity (high X-ray emission) stars, such as the multiple system HR 1099, also typically have abundances showing a strong inverse correlation with the FIP 5 ; 21 . The inverse FIP effect is rarely observed in the solar atmosphere. Still, there are certain locations where the iFIP has been observed. These localized regions are typically in an active region (AR) with complex magnetic field topology, with strong magnetic fields, such as strong light bridges in sunspot umbrae of coalescing or merging sunspots, or transient moments during flaring events (see 2 , and references therein; also 3 in this Topical Issue) as shown with Hinode/EIS 7 . In 3 , IRIS 8 observations are used to show that the iFIP effect occurs in association with increased non-thermal broadening in the chromosphere. Being able to map those locations on the Sun should also help us to understand the iFIP effect in other stars. Hence, it is of great interest to understand chemical fractionation in the Sun and other stars. Since the variation (relative to the photosphere) of solar and stellar abundances in the wind is typically correlated or anti-correlated to the FIP of the elements, and those elements become ionized in the solar chromosphere, the chemical fractionation must occur somewhere in the chromosphere. This region is highly complex due to the many physical processes playing a role: radiative losses, non-LTE effects, non-equilibrium (NEQ) ionization, and partial ionization effects occurring simultaneously, along with numerous transitions with height: from non-magnetized to magnetized, from collisional to collisionless, and from gas pressure-dominated to magnetic pressure. Hence, to address chemical fractionation, these effects are important to consider. However, until now, the state-of-the-art and most popular model is based on semi-empirical 1D models of the derived ponderomotive force from imposed Alfvén waves to address this problem 13 . Such models, by necessity, ignore many of the complex interactions that occur in the chromosphere. In this work, we will investigate, for the first time using a self-consistent multi-fluid approach and for highly simplified scenarios, what would be required to have a ponderomotive force that could lead to an iFIP abundance dependence. For this, we use the multi-fluid, multi-species (MFMS) 3D MHD numerical code (Ebysus, 17 ), as briefly described in the following section. Results and analysis of the parametric study of different numerical simulations of Alfvén waves are detailed in Section III . The discussion and conclusions are detailed in Section IV . II Ebysus: a multi-fluid and multi-species numerical code The MFMS numerical code Ebysus (e.g., 18 ; 9 ) allows solving the MHD equations as a separate fluid for each excited and/or ionized state of each considered species. This code is modular and allows for the inclusion of ionization/excitation in NEQ, collisions and interaction between different fluids, thermal conduction, radiative losses, and the Hall term (see 12 ; 4 for multi-fluid and multi-species derivation). Recently, we have included in this code the second-order Partitioned Implicit-Explicit Orthogonal Runge-Kutta (PIROCK) method, allowing for advancing in time by combining efficient explicit stabilized and implicit integration techniques while employing variable time-stepping with error control 25 . For the present study, following a similar setup as in 18 , we simplify the problem by not including ionization or recombination, thermal conduction along the magnetic field lines, or gravity. Similar to 16 , we assumed five species (hydrogen, helium, iron, silicon, and calcium, with two ionization states (ground and first ionization) as shown in table 1 with initial uniform densities and a temperature of 16000 K. For simplicity, in this work, we considered a fixed density; note that the electron number density within the chromosphere can vary within \sim 10^{9}-10^{13} cm -3 in chromospheric AR (e.g., 23 ). In the future, this variation needs to be addressed. The abundances considered are photospheric 1 . The 1-dimensional numerical domain is 3 Mm long with 3 km grid spacing as shown in figure 1 . The collisions include resonant absorption for hydrogen-hydrogen and hydrogen-helium species interactions, otherwise molecular Maxwell collisions. We also consider Coulomb collisions for charged species (see 24 for details), although they are usually negligible. Table 1: Density of the various fluids. From left to right: the species, and the number density for the neutral and ionized fluid in cm -3 Species Neutrals Ions H 10^{11.1} 10^{10.71} He 10^{10.4} 10^{7.8} Fe 10^{4.5} 10^{5.6} Si 10^{4.8} 10^{5.7} Ca 10^{2.5} 10^{5.4} Figure 1: Velocity for the hydrogen and helium species and magnetic field variation as a function of height at t=1.5 s (x, y, z, respectively, from top to bottom panels). For simplicity, we limit the number of field lines to the two dominant species, i.e., H and He for the simulation B0502. We run a parameter range where we vary the expansion of the magnetic flux tube with height and the field strength to investigate in which scenarios we obtain iFIP, as shown in table 2 . Note, the way we define the expansion is \frac{-\Delta B_{z}}{<|B_{z}|>\,\Delta z}>0 , i.e., cases with the same expansion (B2010, B1005 and B0502) will have same \frac{-\Delta B_{z}}{<|B_{z}|>\,\Delta z} . Note that, in this 1.5D domain, the divergence of the magnetic field is not zero. Similarly, we only vary the B_{x} component at the boundary 16 . Table 2: List of numerical simulations. From left to right: the name, magnetic field configuration, Alfvén speed range, and frequency and amplitude of the Alfvén wave driver. In the second column, the first value of the B range is the bottom boundary, and the second is the top, so [2000,1000] G is a loop whose magnetic field strength decreases with z , i.e., direction of wave propagation. Name B range (G) v_{A} (km s -1 ) Fr. (Hz) B Amp. wave (G) B2015 [2000,1500] [19237,14427] 1 0.1 B2010 [2000,1000] [19237,9618] 1 0.1 B2005 [2000,500] [19237,4809]

Read the complete text