Ladder-like Structural Architecture of Layered Magnetic A 2.4 Cr 8 Te 14 \text{Cr}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{8}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{8}}\text{}}\text{Te}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{14}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{14}}\text{}} ( A = Rb, Cs) Compounds by Self-flux Synthesis
Kai D. Röseler, [a] Felix Eder, [a] Fabian O. von Rohr, * [a] · 2026
Read Ladder-like Structural Architecture of Layered Magnetic A 2.4 Cr 8 Te 14 \text{Cr}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{8}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{8}}\text{}}\text{Te}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{14}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{14}}\text{}} ( A = Rb, Cs) Compounds by Self-flux Synthesis by Kai D. Röseler, [a] Felix Eder, [a] Fabian O. von Rohr, * [a] (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-11153.txt.
Introduction
Röseler and two colleagues show that tuning alkali-tellurium flux mix gives a new family of alkali chromium tellurides. Their ladder-like structures blend delafossite-like two-dimensional nature with hollandite-like tunnel shapes. This yields a newly unseen hybrid frame. Directional magnetism measurements on oriented crystals reveal distinct ground states. RbCrTe is antiferromagnetic at about one hundred fifteen kelvin, while CsCrTe is ferrimagnetic at one hundred twenty-five kelvin. The work shows flux growth as a simple and good design strategy for finding thin solids.
Catalog record
| CREATOR | Kai D. Röseler, [a] Felix Eder, [a] Fabian O. von Rohr, * [a] |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 83112 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2604.11153
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Ladder-like Structural Architecture of Layered Magnetic A 2.4 Cr 8 Te 14 \text{Cr}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{8}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{8}}\text{}}\text{Te}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{14}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{14}}\text{}} ( A = Rb, Cs) Compounds by Self-flux Synthesis Kai D. Röseler, [a] Felix Eder, [a] Fabian O. von Rohr, * [a] Abstract keywords \dedication Introduction The search for new functional materials increasingly turns to modular “synthesis-by-design” strategies, in which known structural units are deliberately combined to generate targeted properties. 15 , 4 , 5 One structural realization of this principle is the formation of complex structures of compounds that can be interpreted as intergrowth of segments of simpler structures. 23 , 21 Such intergrowth phases often serve as structural bridges between known phases and provide a rational route toward new, more complex architectures. 18 , 33 For this study, we considered the family of ternary alkali-chromium tellurides. In this system, all known phases up to date follow one of two structure types: The first known structure type is found for the smaller alkali cations A = Li, Na, K and can be considered as delafossite-like layered phases with a composition of A \text{CrTe}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2}}\text{}} . The crystal structure of these delafossite-type phases consists of \text{CrTe}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2}}\text{}} sheets separated by layers of intercalated alkali cations. 19 , 14 We have recently established a synthetic approach to obtain large single-crystals of delafossite-type \text{ACrX}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2}}\text{}} (X = chalcogen) phases by employing a A /X-self-flux synthesis approach. 30 , 7 , 8 It is worth noting that the deintercalation of these phases by soft-chemical methods has become an central strategy for accessing metastable, magnetic, Cr IV -based vdW materials such as \text{CrTe}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2}}\text{}} . 10 , 25 The second known structure type for A –Cr–Te phases – exhibited by the heavier alkali metals – follows a composition of A_{x} \text{Cr}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{5}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{5}}\text{}}\text{Te}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{8}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{8}}\text{}} ( A = K, Rb, Cs; 0.73\,\leq\,x\,\leq\,1 ) and corresponds to a hollandite-like architecture. Here, the \text{CrTe}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2}}\text{}} layers are interconnected by \text{Cr}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2}}\text{}}\text{Te}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2}}\text{}} slabs forming a tri-periodic framework perforated by channels occupied by alkali cations. 31 , 2 The synthesis route reported for these phases either used a solid-state reaction of the elements 31 ( A = K, Rb, Cs), or a reaction of elemental Cr, Te and either \text{Cs}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2}}\text{}}\text{CO}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{3}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{3}}\text{}} or \text{CsTe}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{4}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{4}}\text{}} as Cs-sources 2 . By altering the amount of Cs-source used, different under-stoichiometric \text{Cs}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{{x}}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{{x}}}\text{}}\text{Cr}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{5}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{5}}\text{}}\text{Te}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{8}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{8}}\text{}} phases with 0.73 < x < 1 have been synthesized. Both structure types contain \text{CrTe}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2}}\text{}} layers of edge-sharing \text{CrTe}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{6}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{6}}\text{}} octahedra, but the number of \text{Cr}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2}}\text{}}\text{Te}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2}}\text{}} bridges connecting them controls the dimensionality – from two-dimensional in delafossite-type to three-dimensional in hollandite-like phases. This increase in dimensionality is accompanied by a decreases with alkali content. A structure with alternating \text{Cr}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2}}\text{}}\text{Te}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2}}\text{}} bridges and layers of alkali atoms, however, has not yet been reported and motivated our search for new two-dimensional magnetic materials. In this work, we apply flux synthesis strategies to these alkali-chromium-tellurides, revealing a novel ladder-like hybrid framework with tunable dimensionality and magnetic ground states – opening a new avenue in single-anion materials design, and bridging a logical gap in the (Rb,Cs)-Cr-Te phase space. Specifically, we obtained large crystals of the previously unreported layered phases \text{Cs}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2.4}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2.4}}\text{}}\text{Cr}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{8}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{8}}\text{}}\text{Te}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{14}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{14}}\text{}} and \text{Rb}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2.4}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2.4}}\text{}}\text{Cr}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{8}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{8}}\text{}}\text{Te}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{14}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{14}}\text{}} . These compounds exhibit the desired double-layered ladder-like architecture, which can be interpreted as a structural intergrowth phase consisting of the structural elements of both the hollandite- and the delafossite-like structures. In direction-dependent magnetization experiments on oriented single crystals we find that \text{Rb}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2.4}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2.4}}\text{}}\text{Cr}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{8}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{8}}\text{}}\text{Te}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{14}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{14}}\text{}} is antiferromagnetic with T_{N} = 114.5 K, while \text{Cs}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2.4}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2.4}}\text{}}\text{Cr}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{8}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{8}}\text{}}\text{Te}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{14}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{14}}\text{}} orders ferrimagnetically at T C = 125 K. Experimental Synthesis of \text{Cs}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2.4}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2.4}}\text{}}\text{Cr}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{8}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{8}}\text{}}\text{Te}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{14}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{14}}\text{}} As a first step, a Cs x Te y precursor was prepared by carefully adding drops of liquid Cs (Alfa Aesar, 99.98%) to crushed Te pieces (Alfa Aesar, 99.999%) in an agate mortar inside an Ar-filled glovebox, which led to the rapid formation of unspecified Cs–Te binary compounds, which were ground into a fine powder. Cr (powder, Alfa Aesar, 99.95%) and the Cs x Te y precursor were then placed in a Canfield alumina crucible set comprising a bottom and top crucible and a frit disc in between 3 . The setup was then sealed in a quartz ampule under an atmosphere of 300 mbar Ar. Inside a muffle furnace, the ampule was heated at 30 °C/h to 1000 °C, and was subsequently slow cooled to 750 °C within 96 h. After this, the ampule was removed from the oven, and the excess flux was separated by immediate high-temperature centrifugation. Synthesis of \text{Rb}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2.4}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2.4}}\text{}}\text{Cr}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{8}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{8}}\text{}}\text{Te}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{14}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{14}}\text{}} Single crystals of \text{Rb}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2.4}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2.4}}\text{}}\text{Cr}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{8}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{8}}\text{}}\text{Te}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{14}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{14}}\text{}} were synthesized using a Rb/Se self flux starting from a molar Rb:Cr:Te ratio of 3.3:1:8. Rb (Strem, 99.9+%), Cr (powder, Alfa Aesar, 99.95%) and Te (pieces, Sigma Aldrich, 99.999%) were placed in a Canfield crucible inside a glovebox with Ar atmosphere. The crucible was then sealed in a quartz ampule under an atmosphere of 300 mbar Ar and placed in a muffle furnace. The temperature program followed by the subsequent centrifugation was identical to the synthesis of \text{Cs}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2.4}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2.4}}\text{}}\text{Cr}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{8}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{8}}\text{}}\text{Te}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{14}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{14}}\text{}} . Synthesis of \text{CsCr}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{5}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{5}}\text{}}\text{Te}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{8}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{8}}\text{}} Single crystals of \text{CsCr}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{5}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{5}}\text{}}\text{Te}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{8}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{8}}\text{}} were synthesized using a Cs/Te self-flux from molar Cs:Cr:Te ratios of 3.3:1:8 by the same procedure as \text{Cs}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2.4}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2.4}}\text{}}\text{Cr}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{8}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{8}}\text{}}\text{Te}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{14}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{14}}\text{}} . By this, black bar-shaped single crystals were obtained. Powder X-ray diffraction (PXRD) measurements confirmed an almost phase-pure product with small impurities of remaining \text{Cs}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2}}\text{}}\text{Te}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{3}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{3}}\text{}} and \text{Cs}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2}}\text{}}\text{Te}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2}}\text{}} flux (see ESI). By applying a saw-tooth like cooling profile (see, Figure ), the crystal size of \text{CsCr}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{5}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{5}}\text{}}\text{Te}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{8}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{8}}\text{}} platelets could be increased moderately. Figure 1: Adjusted temperature program used for the self-flux synthesis of larger single-crystals of \text{CsCr}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{5}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{5}}\text{}}\text{Te}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{8}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{8}}\text{}} compared to two-step synthesis heating up to 1000 °C with 30 °C/h and subsequent cooling to 750 °C over 96 h. Axes not to scale. Powder X-ray diffraction (PXRD) Capillary PXRD data of \text{Rb}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2.4}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2.4}}\text{}}\text{Cr}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{8}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{8}}\text{}}\text{Te}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{14}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{14}}\text{}} and \text{Cs}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2.4}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2.4}}\text{}}\text{Cr}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{8}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{8}}\text{}}\text{Te}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{14}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{14}}\text{}} were collected on a Bruker D8 Discover diffractometer equipped with a LynxeyeXE detector using Mo-K \alpha radiation ( \lambda = 0.710806 Å) in a 2 \theta scan in the range of 2.5–49°. The beam was shaped by a 6 mm focussing Göbel mirror and size selected by a 0.6 mm slit. Capillary PXRD measurements on \text{CsCr}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{5}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{5}}\text{}}\text{Te}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{8}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{8}}\text{}} were performed on a Rigaku SmartLab diffractometer with Cu-K \alpha radiation ( \lambda = 1.54187 Å) on a D/teX Ultra 250 detector in the range of 5°–80°. For this, \text{CsCr}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{5}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{5}}\text{}}\text{Te}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{8}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{8}}\text{}} was diluted with amorphous quartz dust. Calculated patterns were simulated using the Mercury software developed by the Cambridge Crystallographic Data Centre. 20 Full width half maximum (FWHM) values were estimated to match the experimental pattern best. Patterns of \text{Rb}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2}}\text{}}\text{Te}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{3}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{3}}\text{}} , \text{Cs}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2}}\text{}}\text{Te}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{3}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{3}}\text{}} , and \text{Cs}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2}}\text{}}\text{Te}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2}}\text{}} were generated based on crystal structures from the ICSD database 32 : \text{Rb}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2}}\text{}}\text{Te}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{3}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{3}}\text{}} (90806), \text{Cs}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2}}\text{}}\text{Te}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{3}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{3}}\text{}} (53244), and \text{Cs}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2}}\text{}}\text{Te}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2}}\text{}} (83351). Single crystal X-ray diffraction (SXRD) SXRD experiments were performed under \text{N}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2}}\text{}} cooling at 100 K on an Oxford Diffraction Supernova diffractometer using Mo K \alpha radiation ( \lambda = 0.71072 Å). Pre-experiment screenings, data collection, data reduction, and absorption correction were performed using the program suite CrysAlisPro. 24 The crystal structure was solved with the dual space method in SHELXT. 27 Least squares refinements of F 2 were performed using SHELXL 26 . Magnetization measurements Magnetization versus temperature and magnetization versus magnetic field measurements were carried out in a Physical Property Measurement System (PPMS DynaCool) from Quantum Design equipped with the vibrating sample magnetometer (VSM) option. The measurements were performed in a temperature range of 1.8 –