Half-quantized anomalous Hall conductance in topological insulator/ferromagnet van der Waals heterostructures
Shahid Sattar, Roman S. Stepanov, Alexander Tyner, M. F. Islam, A. H. MacDonald, C. M. Canali · 2026
Read Half-quantized anomalous Hall conductance in topological insulator/ferromagnet van der Waals heterostructures by Shahid Sattar, Roman S. Stepanov, Alexander Tyner, M. F. Islam, A. H. MacDonald, C. M. Canali (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-10746.txt.
Introduction
Sattar and five colleagues investigate half-quantized anomalous Hall conductance in topological-insulator and ferromagnet stacks, a parity-anomaly case. A ferromagnetic layer against one surface of a thin topological-insulator slab breaks time-reversal symmetry and opens a gap in the Dirac-like surface spectrum. The result supports chiral currents with a single spin channel, yielding half-quantized conductance of e squared over 2h. With first-principles and tight-binding methods on three stacks, they map the gap and sidewall states and discuss what blocks exact half-quantization.
Catalog record
| CREATOR | Shahid Sattar, Roman S. Stepanov, Alexander Tyner, M. F. Islam, A. H. MacDonald, C. M. Canali |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 29240 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2604.10746
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Half-quantized anomalous Hall conductance in topological insulator/ferromagnet van der Waals heterostructures Shahid Sattar, Roman S. Stepanov, Alexander Tyner, M. F. Islam, A. H. MacDonald, C. M. Canali Abstract The half-quantized anomalous Hall conductance (AHC) in topological materials is a condensed matter physics realization of the parity anomaly of (2+1) quantum field theory and an important challenge for both theoretical and experimental research. A possible realization of this phenomenon may be achieved by interfacing a two-dimensional (2D) ferromagnetic (FM) layer with one surface of a thin slab of a topological insulator (TI), which breaks the otherwise conserved time-reversal symmetry, leading to a gap opening in the Dirac-like energy spectrum of the TI surface states. The resulting heterostructure can support chiral currents where only one spin channel contributes to transport, producing a half-quantized Hall conductance ( e 2 / 2 h e^{2}/2h ). In this work, using first-principles methods together with tight-binding models, we investigate the magnetization-induced gap, the properties of the sidewalls states, and Hall conductance in three different FI/TI van der Waals heterostructures that are relevant for ongoing experiments. We also discuss the factors that can hinder the realization of exact half-quantization in a realistic system and their implication for the quantum anomalous Hall effect and the topological magnetoelectric effect. I Introduction Three-dimensional (3D) topological insulators (TIs) are bulk magneto-electric materials characterized by a quantized axion field, whose electromagnetic action is described by the topological term \mathcal{L}_{\theta}=\frac{\theta}{2\pi}\,\frac{e^{2}}{hc}\,\mathbf{E\cdot B} , where \theta is the Chern-Simons magnetoelectric coupling, taking the value \theta=\pi (mod 2\pi ) for strong TIs 26 ; 4 ; 32 . When time-reversal symmetry is locally broken on the surface of a TI film by an out-of-plane exchange field, the 2D gapless linearly dispersive topological surface states acquire an energy (mass) gap at the Dirac point, which simultaneously leads to the breaking of parity symmetry 4 . This phenomenon can be viewed as condensed matter physics realization of the well-known parity anomaly in ( 2 -space + 1 -time)-dimension field theory 28 1 1 1 In ( 2+1 )-dimension field theory, a gauge invariant regularization process, necessary when a classical parity-symmetric theory for massless fermions is quantized, leads inevitably to the breaking of parity. . A remarkable consequence of the parity anomaly is the appearance of a parity-violating 2D electric current with a half quantized anomalous Hall conductance, \sigma_{xy}^{\text{local}}=\pm\frac{e^{2}}{2h} , which provides a boundary manifestation of the bulk quantized magneto-electric axion field 2 ; 33 ; 27 . Indeed, the half-quantized anomalous Hall effect ( 1/2 -QAHE) on a magnetized TI surface and the predicted quantized topological magneto-electric (TME) response associated with the quantized axion field are two closely connected phenomena and an example of the bulk-boundary correspondence. Detecting the effect of the parity anomaly in the form of the 1/2 -QAHE is however non-trivial, since according to the Nielsen-Ninomiya doubling theorem 24 , Dirac cones in 2D always appear in pairs. Their combined contribution results in the restoration of the parity symmetry, which implies an overall integer QAHE, \sigma_{xy}^{\text{local}}=\pm n\frac{e^{2}}{2h} with n=0,1,2\cdots . This is precisely the case of TI film, when both surfaces are magnetized, leading to either the Chern insulator phase with an integer QAHE or to the axion insulator phase with zero Hall plateaus and large longitudinal resistance. Nevertheless, the fact that in a TI film the two Dirac cones appear on two distinct top and bottom surfaces, offers the possibility of isolating their half-quantized anomalous Hall contribution 11 . The first experimental realization of the parity anomaly state in magnetic TI thin films was reported by Mogi et al. at temperatures up to 2K 21 . In this work, Cr doping on the top surface of a TI thin film breaks time-reversal symmetry and opens up a magnetic exchange gap in the surface Dirac cone, while the bottom surface remains gapless. Subsequently, Jain et al. raised the operating temperature to 10 K by coupling a magnetic CrGe 2 Te 6 layer to top surface of a TI thin film through exfoliation and mechanical stacking 13 . In both experiments, the Hall conductivity was observed to lie within a narrow window around the half-quantized value, \sigma_{xy}=(0.48-0.52) e {}^{2}/\hbar . Moreover, the presence of a non-zero longitudinal conductivity, \sigma_{xx} , in these experiments is attributed to the conductance arising from the metallic bottom surface states. Recently, Hu et al. achieved the layer 1/2-QAHE in a magnetic TI heterostructure, albeit at very low temperature of 30 mK, by positioning the Fermi level within the magnetic gap of the top surface and employed it as a probe of the quantized axion field 11 . In this context, several works discuss the possibility of achieving magnetization-induced exchange gap at a selected TI surface using MnBi 2 Te 4 19 ; 7 ; 9 . 2D ferromagnets (FMs) having large out-of-plane magnetic anisotropy 5 ; 12 ; 16 have been proposed and widely used to induce sizable exchange gap in TI/FM van der Waals heterostructures 10 ; 35 ; 17 ; 18 ; 8 . Motivated by recent experimental advances, especially on the use of ferromagneticc layer in proximity to a TI in Ref. 13 , we considered 2D TI in the form of a six-quintuple-layer (6QL) Bi 2 Se 3 thin film interfaced with three different 2D magnets to investigate magnetization-induced gap, layer-dependent Chern contributions and the resulting topological properties. An important open question in 1/2 -QAHE systems concerns the nature of the associated side-wall edge currents. In contrast to the exponentially localized edge states of the integer QAHE 31 , recent theory has predicted that the edge-current distribution in half-quantized systems may exhibit a much slower power-law decay away from the boundary 37 . This also provides a strong motivation to examine how the side-wall current in our vdW heterostructures decays away from the boundary. Finally, owing to the presence of non-zero longitudinal conductivity in experimental works 11 ; 13 ; 21 , we also analyze whether metallic states originating from gapless bottom surface in our calculations can account for a finite longitudinal transport response. The paper is organized as follows: in Section II, we provide computational details and methods employed in this study. In Section III, we discuss features of a 6QL-Bi 2 Se 3 thin film which is used as a TI, followed by introducing 2D FM layers. We then discuss electronic structure and topological characteristics of each FM/TI vdW heterostructure in the subsequent sections. In Section IV, we provide results on side-wall edge transport and lastly, we summarized our findings in Section IV. II Computational Details We performed first-principles calculations using density functional theory (DFT) with projector augmented waves 1 ; 14 as implemented in the Vienna Ab-initio Simulation Package 15 . Generalized gradient approximation in the Perdew-Burke-Ernzerhof parametrization was used to describe the exchange-correlation effects, with a plane wave cutoff energy set to 430 eV. The van der Waals interactions have been taken into account using the DFT-D3 method with Becke-Johnson damping function 6 . A gamma-centered 9\times 9\times 1 and 12\times 12\times 1 k-mesh was employed for the structural relaxation and self-consistent calculations, respectively. Due to the involvement of heavy elements, spin-orbit effects were always included in the electronic structure calculations. To