On the selection of Saffman-Taylor fingers in a tapered Hele-Shaw cell

Dipa Ghosh, Satyajit Pramanik · 2026

Read On the selection of Saffman-Taylor fingers in a tapered Hele-Shaw cell by Dipa Ghosh, Satyajit Pramanik (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-10407.txt.

Introduction

Ghosh and Pramanik predict finger width in a tapered Hele-Shaw cell by pure math. A steady depth slope bends the classic finger choice rule, which their perturbation method captures. Their formula ties width shift to the gap slope and the modified capillary number. At zero slope, the rule falls back to the known parallel cell result. Tests match lab widths well, and the slope sign can steady or upset the single finger state.

Catalog record

CREATORDipa Ghosh, Satyajit Pramanik
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE73787
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2604.10407

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

On the selection of Saffman-Taylor fingers in a tapered Hele-Shaw cell Dipa Ghosh, Satyajit Pramanik Abstract . We present an analytical study for predicting the finger width of the Saffman-Taylor finger in a tapered Hele-Shaw cell. We consider a rectilinear geometry with a constant depth gradient and apply analytical techniques of singular perturbation analysis and WKB approximation to derive an expression for the finger selection mechanism for such tapered Hele-Shaw cells with small depth gradients. We establish Λ − 1 2 ∼ f ⁡ ( α ) ​ C ​ a m 2 / 3 as C ​ a m → 0 , and ​ | α | ≪ 1 . \Lambda-\frac{1}{2}\sim f(\alpha)Ca_{m}^{2/3}\quad\mbox{as}\quad Ca_{m}\rightarrow 0,\;\;\;\mbox{and}\;\;\;\lvert\alpha\rvert\ll 1. Here, Λ \Lambda is the dimensionless finger width, C ​ a m Ca_{m} denotes the modified Capillary parameter, and f ⁡ ( α ) f(\alpha) is a linear function of the gap gradient α \alpha , such that f ⁡ ( α = 0 ) = 1 f(\alpha=0)=1 recovering the results of parallel Hele-Shaw cell (Hong and Langer [ 38 ] , Combescot et al. [ 22 ] , Shraiman [ 67 ] ). Our findings indicate that the Hele-Shaw cell gap gradient plays a crucial role in determining Λ \Lambda , allowing for control over fingering instabilities such that the single-finger steady state can be stabilised or destabilised depending on the sign of the gradient, compared to the standard Hele-Shaw cell. The theoretical estimates reveal excellent agreement with experimental finger-width data and predictions from linear stability analyses. 2020 Mathematics Subject Classification Primary: 34E20; 76D27; 34E10. 1. Introduction Viscous fingering (VF) instability is a fundamental interfacial instability in hydrodynamic systems and represents a canonical mechanism for spontaneous pattern formation in viscous flows [ 36 , 65 , 21 ] . It has been extensively investigated within the framework of interfacial hydrodynamics [ 36 , 37 ] , nonlinear stability theory [ 6 ] , and pattern selection [ 51 , 38 , 22 , 39 ] across multiple disciplines. The instability was first demonstrated experimentally in 1958 by Saffman and Taylor [ 65 ] in a rectilinear Hele–Shaw cell, composed of two parallel glass plates, separated by a narrow uniform gap. Subsequently, the problem has been extensively studied in radial Hele–Shaw geometries [ 74 ] . In the radial configuration, Hele-Shaw flows take place when the less viscous fluid is injected at a constant injection rate at the centre of the cell, and drives the more viscous fluid radially outwards. The gap-averaged velocity in a Hele–Shaw cell [ 64 ] is mathematically equivalent to a two-dimensional viscous flow through a porous medium and obeys Darcy’s law; hence, it serves as a convenient laboratory analogue for porous media displacements [ 36 , 65 , 21 , 51 , 37 ] . Since then, this phenomenon—commonly referred to as the Saffman–Taylor instability or pore-scale viscous fingering—has formed the basis of a vast body of theoretical, numerical, and experimental research on interfacial instabilities. In the classical Saffman–Taylor experiment [ 65 ] , a low-viscosity Newtonian fluid (e.g., water) is injected into a cell initially filled with a more viscous Newtonian fluid (e.g., oil). Under these conditions, the initially planar interface becomes hydrodynamically unstable and develops finger-like protrusions of the invading phase into the displaced one, leading to the breakdown of the initially straight interface. At sufficiently high velocities, a single finger emerges and is stabilized by surface tension, occupying nearly half of the channel width ( W ) [ 65 ] , a result later supported by the theoretical analysis of Pitts [ 62 ] and many others [ 68 , 69 ] . However, their analytic solution without surface tension does not restrict the value of \Lambda [ 51 ] . The significance of the surface tension to the shape selection procedure was analytically highlighted much later by Hong and Langer in 1986 [ 38 ] and similar parallel works by others [ 22 , 67 , 73 , 16 ] , who showed that the surface tension appeared in the problem as a singular perturbative term leading to a solvability condition at the fingertip, thereby isolating a particular value from the continuum of solutions. However, the analytical solution was derived for Newtonian-Newtonian fluid displacements. In this regard, Bansal et al. [ 14 ] recently derived an analytical expression for the non-Newtonian finger profile in a parallel rectangular Hele–Shaw cell, capturing both finger-thinning and finger-widening regimes. 1.1. Applications and importance Although viscous fingering is a paradigmatic instability in pattern formation, it arises widely in industrial and geological processes, such as enhanced oil recovery (EOR) [ 35 , 46 , 5 , 60 , 75 ] and CO 2 geological sequestration [ 42 ] , where it is often undesirable. In EOR, water is injected into porous oil reservoirs to displace oil; however, due to the Saffman–Taylor instability, fast-growing water fingers can reach the production well prematurely, resulting in the extraction of mostly water rather than oil and a severe reduction in recovery efficiency. This makes viscous fingering a serious morphogenetic nuisance and a major obstacle in petroleum engineering. Given the growing global demand for energy, therefore, improving oil recovery from porous reservoirs has become increasingly important [ 4 , 5 , 60 , 70 , 28 , 26 ] . Because of situations like this, much attention has been devoted to devising strategies for controlling, and eventually stabilizing, the growth of such patterns in immiscible [ 35 , 37 , 56 ] and miscible displacements [ 72 , 32 , 63 ] in porous media. 1.2. Control of Viscous Fingering Instabilities Many studies have shown that uncontrolled viscous fingering can severely compromise the efficiency of oil recovery operations, thereby motivating the development of strategies to mitigate such instabilities. One such approach is stabilization through the introduction of a depth gradient in confined geometries [ 50 ] . Early investigations in the context of thin films between rollers and spreaders examined the influence of depth gradients on the Saffman–Taylor instability [ 57 , 61 ] . More recently, this problem has attracted renewed attention owing to the close analogy between flow in a Hele–Shaw cell and flow through porous media [ 37 , 78 , 15 ] . In this context, Al-Housseiny et al. [ 3 , 2 ] reinterpreted the linear stability analysis in the presence of a small gap gradient—i.e., in an angled Hele–Shaw cell—as a viable stabilization and control mechanism. Earlier experimental work by Zhao et al. [ 77 ] demonstrated that Saffman–Taylor fingers can be either stabilized or destabilized depending on the sign of the gap gradient, while Dias and Miranda [ 30 ] extended linear stability theory to predict finger tip-splitting in the presence of variations in the flow passage. Subsequently, a large body of work has investigated interfacial instabilities in a variety of non-standard Hele–Shaw configurations and flow geometries. In tapered and angled cells, where the plate spacing varies along the flow direction, depth gradients modify the base flow and the linear growth rates of perturbations, providing a powerful mechanism to stabilize or destabilize viscous fingering [ 30 , 3 , 2 , 31 , 48 ] . In angled Hele-Shaw

Read the complete text