A Benchmark of Dexterity for Anthropomorphic Robotic Hands
Davide Liconti, Yuning Zhou, Yasunori Toshimitsu, Ronan Hinchet, Robert K. Katzschmann · 2026
Read A Benchmark of Dexterity for Anthropomorphic Robotic Hands by Davide Liconti, Yuning Zhou, Yasunori Toshimitsu, Ronan Hinchet, Robert K. Katzschmann (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-09294.txt.
Introduction
Liconti and colleagues introduce POMDAR, a dexterity benchmark for human-like robot hands based on measured task performance. Dexterity is often used in mixed ways, with systems judged under different rules that block fair comparison. POMDAR defines dexterity as performance across hand motions drawn from human motor control groupings, in reality and simulation. Four setups cover upright and flat setups, steady spinning, and pure grasping, with frames to limit motion and block workarounds. A score mixing rightness and speed measures dexterity as throughput.
Catalog record
| CREATOR | Davide Liconti, Yuning Zhou, Yasunori Toshimitsu, Ronan Hinchet, Robert K. Katzschmann |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 38785 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2604.09294
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
A Benchmark of Dexterity for Anthropomorphic Robotic Hands Davide Liconti, Yuning Zhou, Yasunori Toshimitsu, Ronan Hinchet, Robert K. Katzschmann Abstract Dexterity is a central yet ambiguously defined concept in the design and evaluation of anthropomorphic robotic hands. In practice, the term is often used inconsistently, with different systems evaluated under disparate criteria, making meaningful comparisons across designs difficult. This highlights the need for a unified, performance-based definition of dexterity grounded in measurable outcomes rather than proxy metrics. In this work, we introduce POMDAR, a comprehensive dexterity benchmark that formalizes dexterity as task performance across a structured set of manipulation and grasping motions. The benchmark was systematically derived from established taxonomies in human motor control. It is implemented in both real-world and simulation and includes four manipulation configurations: vertical and horizontal configurations, continuous rotation, and pure grasping. The task designs contain mechanical scaffolding to constrain task motion, suppress compensatory strategies, and enable metrics to be measured unambiguously. We define a quantitative scoring metric combining task correctness and execution speed, effectively measuring dexterity as throughput. This enables objective, reproducible, and interpretable evaluation across different hand designs. POMDAR provides an open-source, standardized, and taxonomy-grounded benchmark for consistent comparison and evaluation of anthropomorphic robot hands to facilitate a systematic advancement of dexterous manipulation platforms. CAD, simulation files, and evaluation videos are publicly available at https://srl-ethz.github.io/POMDAR/ . I Introduction For anthropomorphic robotic hands, dexterity is not only a central design objective but also the defining attribute that distinguishes them from traditional grippers. Yet a major research gap persists: there is no unified definition of dexterity for anthropomorphic hands, nor a standardized framework for evaluating it across designs. This limits meaningful comparison across systems and hinders the community’s ability to systematically design, optimize, and select hands for specific manipulation tasks. A key challenge is that dexterity cannot be captured through kinematic properties alone. Measures such as degrees of freedom, joint limits, or manipulability indices reflect a system’s potential but not how effectively a hand performs real manipulation under contact-rich interactions. Dexterity must therefore be evaluated in a performance-based manner, which requires specifying a representative set of tasks grounded in established studies of hand motion, grasping, and manipulation primitives. The consequences of this dexterity definition and evaluation gap are visible even in top venues. Two anthropomorphic hands recently published in Nature Communications , the SMA Hand [ 20 ] and the ILDA Hand [ 14 ] , share only one common metric: finger reachable workspace. All other assessments rely on ad-hoc measures such as specific grasp postures or custom-designed tasks. More broadly, the lack of a standardized benchmarking framework [ 10 ] means that researchers, developers, and end users have no reliable method to compare dexterity across hand designs [ 5 , 22 , 10 ] . This complicates the assessment of design improvements and limits the ability to match hand designs to specific task requirements. To address these gaps, we introduce POMDAR, a systematic dexterity benchmarking framework applicable to both physical and simulated environments. Our benchmark is guided by the following design principles: 1. Representative of real hand use : Every benchmark task can be traced to an existing manipulation or grasp taxonomy, ensuring a representative choice of tasks. 2. Reproducible across laboratories : The benchmark design is open source and can be fully 3D printed, ensuring easy access without external procurement. Many components are reused across tasks, further facilitating fabrication. In addition, the benchmark is also available in simulation, allowing for pre-fabrication dexterity evaluation and design optimization. 3. Directly observable, standardized motions : The benchmark uses mechanical scaffolds to constrain task motion to the intended degrees of freedom to suppress compensatory strategies (e.g., gravity assistance, palm support, or excessive arm/wrist involvement), standardizing movements and enabling direct observation of the task completion level. 4. Quantitative, throughput-based evaluation : Dexterity is measured through a unified score that combines task success and execution speed, effectively capturing performance as task throughput. This enables objective, continuous, and easily comparable evaluation across different hand designs. II Approaches to define and measure dexterity Fig. 2: Overview of hand tasks based on those identified in Elliott & Connolly’s taxonomy for manipulation [ 9 ] , Ma & Dollar’s extension [ 15 ] , and Feix’s GRASP taxonomy [ 11 ] , respectively identified with the symbols EC , MD , and F . Many of the GRASP taxonomy postures are inherently contained in each of the manipulation patterns, providing an opportunity to make the benchmark more efficient. The taxonomies are grouped in the POMDAR benchmark task. Refer to Figure 3 for the actual implementation of the tasks. II-A Definition of Dexterity Early medical literature distinguished between fine (finger) dexterity, involving coordinated finger movements on smaller objects, and gross (manual) dexterity, involving whole-hand and arm movements on larger objects [ 12 ] . Later rehabilitation definitions increasingly characterized dexterity as coordinated voluntary movement for functional object manipulation, emphasizing speed and task completion [ 1 ] . More recent formulations extend the concept to include adaptation to environmental changes and task demands, framing dexterity as an interaction between motor control and external constraints [ 8 ] . This implies that dexterity is inherently tied to dynamic behavior and cannot be measured from static grasps alone. In robotics, Cutkosky [ 6 ] argued that dexterity depends on two parameters: manipulability (the ability of a grasp to impart arbitrary motions to an object) and kinematic workspace. Bicchi [ 2 ] later emphasized in-hand object repositioning and reorientation which are enabled by kinematic redundancy. II-B Classification of Dexterous Tasks Researchers in both medicine and robotics have proposed taxonomies of human hand activities. Bullock et al. [ 3 ] provide a compact, motion-centric map of manipulation using five binary descriptors (contact, prehensile/non-prehensile, motion, within-hand motion, motion-at-contact), yielding 15 mutually exclusive classes. From these, grasping (static contact to constrain an object) and in-hand manipulation (dynamic contact for repositioning or reorienting an object) emerge as two principal categories. For manipulation , Elliott and Connolly [ 9 ] contribute a human-derived set of 13 coordination patterns (synergy- and sequence-based), forming a minimal library of dexterity primitives for task selection. Ma and Dollar [ 15 ] augment this set with robotics-relevant categories (regrasping, in-grasp manipulation, finger gaiting, rolling, sliding, and finger pivoting/tracking), explicitly covering pivoting/tracking behaviors that are otherwise underrepresented. For grasping , Napier’s power–precision split [ 17 ] distinguishes force-dominant from dexterity-dominant grasps. Cutkosky [ 6 ] adds a task-driven hierarchy based on object geometry, clamping, and force. Feix et al.’s GRASP Taxonomy [ 11 ] provides a comprehensive set of 33 stable, one-handed prehensile grasp types, classified by opposition type, virtual-finger roles, and thumb position, forming a practical catalog for selecting standardized grasping postures. III Existing Dexterity Benchmarks In the literature, existing evaluation practices broadly fall into two families: parameter-based (proxy) evaluation and task-performance-based evaluation, the latter aligning with performance-based outcome measures of dexterity (PBOMD) used in clinical assessment [ 21 ] . III-A Parameter-based (proxy) evaluation paradigm A common practice in both academic reporting and commercial specifications is to infer “dexterity” from design parameters such as the number of degrees of freedom, joint ranges of motion, actuator count, speed, and kinematic indices (e.g., Jacobian-based manipulability and conditioning) [ 8 ]