Design and Implementation of a Multi-Sensor DAQ System for Comparative Photovoltaic Performance Analysis

Maickol Fernandez-Obando , Luis G. Leon-Vega , Leonardo Cardinale-Villalobos , Christopher Vega-Sanchez , Luis D. Murillo-Soto · 2026

Read Design and Implementation of a Multi-Sensor DAQ System for Comparative Photovoltaic Performance Analysis by Maickol Fernandez-Obando , Luis G. Leon-Vega , Leonardo Cardinale-Villalobos , Christopher Vega-Sanchez , Luis D. Murillo-Soto (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-06670.txt.

Introduction

Fernandez-Obando and four colleagues build a custom data-capture system for comparing two solar panels under different cooling. The rig joins a custom board for 20 thermistors, dual high-precision current and voltage sensors, weather monitors, and a Raspberry Pi 4 platform. Its software runs on its own, recovers from faults, stores data twice, syncs to the cloud, and shows live Grafana dashboards. Field tests showed steady operation from 5 AM to 6 PM with one-minute sampling and automatic recovery after power cuts.

Catalog record

CREATORMaickol Fernandez-Obando , Luis G. Leon-Vega , Leonardo Cardinale-Villalobos , Christopher Vega-Sanchez , Luis D. Murillo-Soto
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE31047
LICENSEhttp://creativecommons.org/licenses/by-sa/4.0/
RIGHTSCC BY SA
SOURCEarXiv

Source: https://arxiv.org/abs/2604.06670

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Design and Implementation of a Multi-Sensor DAQ System for Comparative Photovoltaic Performance Analysis Maickol Fernandez-Obando , Luis G. Leon-Vega , Leonardo Cardinale-Villalobos , Christopher Vega-Sanchez , Luis D. Murillo-Soto Abstract The rigorous analysis of specialized physical processes often demands custom data acquisition architectures that offer flexibility and precision beyond the capabilities of general-purpose commercial loggers. This paper presents the design and implementation of a robust data acquisition system (DAQ) for a comparative analysis of the performance of two photovoltaic panels with two different cooling systems. The system integrates a custom PCB design for 20 thermistors, dual high-precision INA228 current/voltage sensors, environmental monitoring equipment, and a Raspberry Pi 4-based acquisition platform. The software architecture implements autonomous operation with enhanced fault recovery, dual storage redundancy (local CSV and InfluxDB), cloud synchronization via Google Drive, and real-time visualization through Grafana dashboards. Field deployment demonstrated system reliability, including automatic recovery from power interruptions, a 1-minute sampling rate, remote monitoring capabilities, and continuous operation during a 5 AM to 6 PM daily window. The modular hardware and software architecture enables simultaneous monitoring of two photovoltaic panels for research on direct performance comparison under identical environmental conditions. I Introduction Our planet is experiencing a warming phase caused by greenhouse gasses, which causes an increase in global temperature. High ambient temperatures and heat waves significantly impact the performance of electricity production from photovoltaic (PV) panels installed around the world [ 1 ] . The electrical energy coming from photovoltaic systems represents more than 10% of global energy production, and it accounts for almost 80% of the increase in renewable energy projected for 2025 [ 2 ] . However, photovoltaic panels decrease their productivity when they heat up; therefore, temperature is a key variable to improve productivity in such systems. For this reason, research has been conducted to reduce the temperature of photovoltaic modules [ 3 , 4 ] . However, for these developments to be reliable, it is important to closely monitor electrical, thermal, and environmental variables related to photovoltaic modules using data acquisition systems. Building on this premise, research on the thermal behaviour of PV systems demands high-resolution data acquisition for performance characterization and comparative analysis. Flexible sensing stacks are particularly critical on research benches, where instrumentation must be reconfigured frequently, and thermal gradients must be mapped across paired panels to expose treatment deltas. Conventional PV loggers and supervisory control platforms emphasize fleet-level KPIs, aggregated energy reporting, and utility-class safety limits. Those priorities leave little room for dense thermal imaging, per-module instrumentation, or rapid sensor reconfiguration, all of which are necessary when comparing experimental cooling strategies against a reference module under identical conditions. In this regard, this research presents a custom-designed data acquisition system for a passive microfluidic heat exchanger, which dissipates heat without requiring external energy sources. This low-cost, modular, portable, and easy-to-install heat exchanger could be installed on the millions of photovoltaic panels installed worldwide, for both mono- and polycrystalline monofacial technologies, to increase the efficiency of the panels and, consequently, the efficiency of solar farms. Figure 1 shows the system used to carry out this research. It consists of two 6 W monocrystalline PV modules: a control panel and a passive-cooled panel equipped with a heat exchanger. Given that both modules are placed next to each other, it can be considered that they operate under identical environmental conditions but using independent MPPT controllers. The proposed DAQ solution presented here combines a large number of thermal sensors, independent electrical channels, and a data infrastructure to compare the two identical systems under different cooling systems. The main established requirements were: (i) spatial measurements of temperature and environmental variables, (ii) collection of the main electrical variables, and (iii) automated data acquisition adapted to actual operating conditions. Fig. 1 : PV modules used to evaluate different cooling systems aimed at reducing PV average temperture, requiring the implementation of the DAQ proposed in this research. This work contributes to the design and implementation of a Raspberry Pi-based multi-sensor DAQ system for temperature and power analysis oriented to cooling-system research. The architecture delivers dense thermal gradient data acquisition through dense thermistor arrays per panel, dual electrical measurement chains, and integrated meteorological context while remaining cost-effective for research benches. Field results, later in the paper, demonstrate how these capabilities enable direct comparison between passive-cooled and control panels. This manuscript is organized as follows: Section II covers the analysis on commercial and academic monitoring solutions. Section III summarizes the proposed system architecture, while Section IV and Section V detail the hardware and software stacks, respectively. Section VI presents the field deployment results, and Section VII presents the most important findings of this research. II Comparison with Existing Solutions Photovoltaic monitoring solutions span from utility-scale commercial platforms to research-oriented acquisition systems, each addressing different operational priorities. Commercial platforms prioritize fleet management and regulatory compliance, while academic systems emphasize flexibility and cost-effectiveness, often at the expense of robustness or channel density. This section examines representative solutions across both domains to contextualize the requirements for comparative cooling systems experiments. Commercial PV monitoring platforms are designed for utility-scale arrays rather than controlled experiments. The Solar-Log line, for instance, combines metering-certified power meters with proprietary gateways aimed at multi-string plants above tens of kilowatts and focuses on energy-yield KPIs and fleet alarms [ 5 ] . While robust for large installations, it is optimized for aggregated DC inputs and string-combiner integration, leaving no provision for attaching dense thermistor arrays or low-level meteorological probes per module. Configuration assumptions (PV strings above tens of amperes, 1 kV DC limits, external pyranometers) make them impractical for side-by-side research benches where sensors must be rewired frequently following research emerging interests. At the opposite end of the cost-complexity spectrum, research-oriented DAQ examples also prove insufficient. The real-time DAQ study in [ 6 ] uses a general-purpose microcontroller with a modest ADC front-end and a cloud dashboard. It demonstrates streaming of irradiance and electrical variables, yet relies on single-channel measurement loops with limited buffering through basic SD card storage. The architecture lacks redundancy, multi-threaded acquisition, or distributed thermal instrumentation, thereby preventing unattended comparisons between competing panel treatments. Research-grade commercial dataloggers represent an intermediate option. The Campbell Scientific CR1000Xe measurement and control datalogger [ 7 ] provides industrial-grade reliability with 16 single-ended analog inputs (expandable via multiplexers), 24-bit ADC resolution, extended temperature operation ( -55\text{\,}\mathrm{\SIUnitSymbolCelsius}85\text{\,}\mathrm{\SIUnitSymbolCelsius} ), and programmable sampling from 1\text{\,}\mathrm{ms} to daily intervals. Its CRBasic programming environment and multiple communication protocols (Ethernet, cellular, satellite) enable sophisticated monitoring deployments. However, at $2,892.25 USD for the base datalogger alone [ 8 ] —before sensors, enclosures, power supplies, or software licenses—making them prohibitive for budget-constrained research programs. To ground the cost-effectiveness claims, Table I reports the bill of materials for the proposed DAQ using Amazon-sourced 2025 USD prices. The full edge node totals $331, including $50 for the PCB stack-up (fabrication at $10 plus $40 international shipping) and a breakdown across the main categories requested (Raspberry Pi, PCBs, integrated circuits, and sensors). This represents roughly 11% of the CR1000Xe base price, before accounting for the latter’s additional sensor and enclosure costs. TABLE I : Estimated bill of materials for the DAQ (2025 USD). Raspberry Pi 4 $65 PCBs (fabrication, shipping, passives) $56 Integrated circuits (ADC,

Read the complete text