Characterizing charge-parity detection based on an offset-charge-tunable transmon qubit via randomized benchmarking
Yao-Yao Jiang, Tang Su, Yuxiang Liu, Yi-Ming Guo, Yidong Song, Yu-Long Li, Yanjie Zeng, Guang-Ming Xue, Wei-Jie Sun, Mei-Ling Li, Yi-Rong Jin, Junhua Wang, Xuegang Li, Hai-Feng Yu · 2026
Read Characterizing charge-parity detection based on an offset-charge-tunable transmon qubit via randomized benchmarking by Yao-Yao Jiang, Tang Su, Yuxiang Liu, Yi-Ming Guo, Yidong Song, Yu-Long Li, Yanjie Zeng, Guang-Ming Xue, Wei-Jie Sun, Mei-Ling Li, Yi-Rong Jin, Junhua Wang, Xuegang Li, Hai-Feng Yu (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-02809.txt.
Introduction
Jiang and thirteen colleagues characterize charge-parity detection with an offset-charge-tunable transmon qubit, a superconducting platform sensitive at the millielectronvolt scale for rare event searches. Gate-line control reaches single-qubit gate fidelity up to 99.96 percent, while net-zero pulses plus spin-echo sequences map charge-parity states at 99.37 percent fidelity. Continuous monitoring holds above 93.4 percent fidelity at 4-microsecond intervals, with readout as the largest error source.
Catalog record
| CREATOR | Yao-Yao Jiang, Tang Su, Yuxiang Liu, Yi-Ming Guo, Yidong Song, Yu-Long Li, Yanjie Zeng, Guang-Ming Xue, Wei-Jie Sun, Mei-Ling Li, Yi-Rong Jin, Junhua Wang, Xuegang Li, Hai-Feng Yu |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 38830 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2604.02809
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Characterizing charge-parity detection based on an offset-charge-tunable transmon qubit via randomized benchmarking Yao-Yao Jiang, Tang Su, Yuxiang Liu, Yi-Ming Guo, Yidong Song, Yu-Long Li, Yanjie Zeng, Guang-Ming Xue, Wei-Jie Sun, Mei-Ling Li, Yi-Rong Jin, Junhua Wang, Xuegang Li, Hai-Feng Yu Abstract Superconducting qubits are compelling platforms for charge-parity detection and, due to their theoretical sensitivity on the meV energy scale, hold promise for rare event searches. In this work, we realize high-fidelity mapping of charge-parity states onto qubit states using an offset-charge-tunable transmon qubit and efficiently characterize the fidelity of the charge-parity detection via randomized benchmarking. Specifically, a gate control line is applied to control offset charge, allowing us to achieve the single-qubit gate fidelity up to 99.96%. We combine a net-zero-based pulse on the gate line with a spin-echo-based sequence to realize charge-parity mapping, achieving a fidelity of 99.37%. Then, we demonstrate continuous monitoring of the charge-parity state with over 93.4% fidelity at a 4- μ \mu s sampling interval. Finally, an error analysis of charge-parity detection is performed, and it is found that qubit readout is currently the largest source of error. We believe this work lays the foundation for future exploration of ultra-low energy particles. I INTRODUCTION Superconducting quantum computing has advanced rapidly, characterized by a significant increase in the number of physical qubits AbuGhanem 2025 ; Jin et al. 2025 ; Gao et al. 2025 , improvements in qubit gate fidelity McKay et al. 2023 ; Marxer et al. 2025 ; Li et al. 2023 , and the successful demonstration of quantum error correction Acharya et al. 2024 ; Krinner et al. 2022 ; Zhao et al. 2022 . However, these superconducting qubits are susceptible to quasiparticle (QP) bursts, for example from cosmic rays McEwen et al. 2021 ; Harrington et al. 2025 ; Li et al. 2025 ; Wilen et al. 2021 . Theoretically, superconducting qubits are sensitive to even energy deposition at the meV scale, an amount sufficient to break Cooper pairs in the superconductor and generate QPs. These QPs can tunnel across the Josephson junctions of the qubit and thus induce the charge-parity switches and qubit state transitions Catelani et al. 2011 ; Catelani 2014 ; Ristè et al. 2013 ; Serniak et al. 2018 . This presents both challenges and opportunities. On one hand, it requires complex shielding Bertoldo et al. 2025 ; Loer et al. 2024 ; Bratrud et al. 2024 and error mitigation protocols Iaia et al. 2022 ; Xu et al. 2022 ; McEwen et al. 2024 ; Wu et al. 2025 to ensure quantum computational robustness; on the other hand, it also makes superconducting qubits a promising detector for single far-infrared photons, dark matter particles, and neutrinos Chou et al. 2023 ; Ramanathan et al. 2024 ; Fink et al. 2024 ; Linehan et al. 2025 . Theoretical schemes for low-energy particle detection based on charge-parity switches of superconducting qubits have been proposed, known as the quantum parity detector (QPD) Ramanathan et al. 2024 ; Fink et al. 2024 . Experimentally, quantum capacitance detectors based on charge-sensitive superconducting qubits Nakamura et al. 1999 (a type of QPD) have been shown to be able to detect single far-infrared photons at 1.5 THz Echternach et al. 2018 . The key point of these schemes is to detect charge-parity states of qubits. A straightforward strategy is to read out the parity-dependent qubit frequency shift by coupling the qubit to a microwave waveguide Fink et al. 2024 ; Amin et al. 2024 . While this approach is convenient to implement, it suffers from slightly lower readout photon-collection efficiency. To address this, one can introduce a resonator as an intermediary Serniak et al. 2019a ; Ramanathan et al. 2024 , collecting more coherent signal photons. Ref. Serniak et al. 2019b has achieved a detection fidelity of 99% using direct dispersive readout based on the parity-dependent resonator frequency shift. However, direct dispersive charge-parity measurement may also increase the probability of readout-induced transitions in qubits Sank et al. 2016 ; Khezri et al. 2023 ; Nesterov and Pechenezhskiy 2024 ; Féchant et al. 2025 ; Connolly et al. 2025 . Reducing the dispersive coupling strength between the qubit and the resonator can help mitigate such errors, but at the cost of greatly decreasing the parity-dependent resonator frequency shift. In this regime, mapping the charge-parity states to the qubit states, followed by the qubit dispersive readout, is a more convincing approach Ristè et al. 2013 ; Serniak et al. 2018 . Refs. Ristè et al. 2013 ; Serniak et al. 2018 utilize Ramsey-based pulse sequences to detect the parity-dependent qubit frequency shift and demonstrated a charge-parity detection fidelity of 91-92%. However, when scaled to larger two-dimensional QPDs, this method may be more vulnerable to low-frequency noise. Furthermore, to our knowledge, an randomized-benchmarking-like (RB-like) protocol to quantify the average error rate of charge-parity detection is still lacking. Figure 1: (a) False-colored optical image of a single-qubit unit in the device. The bottom chip comprises a microwave (MW) or flux control line (blue), a gate control line (magenta), and a \lambda/4 readout resonator (orange). The top chip contains only a transmon qubit (green). (b) The circuit diagram of the device shown in (a). (c) The two lowest energy levels ( E_{0} and E_{1} ) of the qubit as a function of the offset charge n_{g}(2e) for even (solid line) or odd (dashed line) charge-parity states. The parity-dependent qubit frequencies ( f_{e} and f_{o} ) are degenerate at n_{g}=0.5n+0.25,n=0,\pm 1,\pm 2,... (degeneracy points). The n_{g} can be tuned away and back to the degeneracy point with a gate pulse (magenta) to accumulate parity-dependent phases of the qubit. (d) Spin-echo-based sequence with an inserted net-zero-based gate pulse for charge-parity mapping, named EchoCPM, where several Bloch sphere diagrams show corresponding qubit states. Charge-parity detection can be realized by first resetting the qubit, performing the EchoCPM, and then following the qubit measurement. In this work, we implement a high-fidelity charge-parity mapping based on a spin-echo-like sequence Hahn 1950 , named EchoCPM, and characterize its performance via Clifford-based randomized benchmarking (RB) Knill et al. 2008 ; Magesan et al. 2011 . First, we add a gate line to control the offset charge of a transmon qubit, enabling fast offset-charge calibration. Then, by integrating a net-zero-based pulse Negîrneac et al. 2021 on the gate line (gate pulse) with spin-echo-based sequences (see Fig. 1 (d)), we can accumulate a \pi phase difference between two charge-parity states, creating a robust charge-parity mapping framework. By constructing this mapping into a Clifford Z gate, we can measure its fidelity using RB. Combined with qubit state preparation and measurement, we demonstrate continuous charge-parity detection and provide a comprehensive error analysis. II Device and charge-parity detection In our experiment, we employ an offset-charge-tunable transmon qubit as a QPD. As depicted in Fig. 1 (a), the device uses a flip-chip layout comprising a top qubit chip and a bottom carrier chip. The qubit chip hosts solely a transmon qubit, while the carrier chip integrates a readout resonator, a microwave (MW) or flux control line, and a gate control line. The MW/flux control line, which is inductively coupled to the qubit, is used to drive the qubit and tune its frequency. The