Temporal soliton generation in an ultra-high-effective-Q Kerr resonator enabled by Raman gain Journal: opticajournal

G. Semaan, Y. Sun, N. Englebert, S. P. Gorza, F. Leo · 2026

Read Temporal soliton generation in an ultra-high-effective-Q Kerr resonator enabled by Raman gain Journal: opticajournal by G. Semaan, Y. Sun, N. Englebert, S. P. Gorza, F. Leo (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-02274.txt.

Introduction

Semaan and colleagues generate temporal solitons in a fiber ring cavity whose finesse is tuned live by distributed Raman amplification. The setup reaches a narrow linewidth near 725 Hz at 1555 nm, stretching photon lifetime enough to excite stable cavity solitons. The result is a low repetition rate frequency comb spaced at 580 kHz. Analysis shows a tradeoff: Raman loss compensation brings noise, pitting soliton excitation threshold against stability.

Catalog record

CREATORG. Semaan, Y. Sun, N. Englebert, S. P. Gorza, F. Leo
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE18721
LICENSEhttp://creativecommons.org/licenses/by-sa/4.0/
RIGHTSCC BY SA
SOURCEarXiv

Source: https://arxiv.org/abs/2604.02274

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Temporal soliton generation in an ultra-high-effective-Q Kerr resonator enabled by Raman gain Journal: opticajournal G. Semaan, Y. Sun, N. Englebert, S. P. Gorza, F. Leo Abstract We demonstrate temporal pattern formation in a coherently driven fiber ring cavity whose effective finesse is continuously reconfigured using distributed Raman amplification. We achieve an effective finesse of up to ℱ eff ≈ 800 \mathcal{F}_{\mathrm{eff}}\approx 800 , corresponding to a linewidth of approximately 725 Hz ( Q ≈ 2.7 × 10 11 Q\approx 2.7\times 10^{11} ) at 1555 nm. By exploiting the resulting increase in effective photon lifetime, we excite stable temporal cavity solitons and generate a low-repetition-rate frequency comb with a spacing of 580 kHz. Finally, we analyze the impact of the Raman loss-compensation mechanism, particularly its associated noise and show that a trade-off exists between soliton excitation threshold and stability. Temporal cavity solitons (CSs) are localized pulses sustained by a balance between dispersion and Kerr nonlinearity under coherent driving [ 23 , 17 ] . Over the past decade, these sources have attracted considerable interest and enabled a wide range of applications. A major limitation, however, stems from the local energy exchange in resonators governed by the seminal Lugiato–Lefever (LL) equation [ 26 , 11 ] . Because the Kerr response is nearly instantaneous and the dispersion is weak, the energy sustaining a cavity soliton must be supplied within its own temporal duration, resulting in high continuous-wave driving power thresholds. Synchronous pulsed driving can alleviate this constraint by reducing the average power injected into the cavity for a given peak power [ 28 ] . However, it increases experimental complexity, may introduce additional noise, and offers limited benefits for resonators operating at high repetition rates. These fundamental limitations of LLE-class resonators have recently triggered extensive research efforts aimed at redistributing energy within the system [ 35 ] . For instance, linear mode coupling has been exploited to reduce the oscillation threshold and achieve very high conversion efficiencies [ 31 , 15 , 16 , 18 ] . An alternative consists in providing the soliton with multiple energy sources. In this context, introducing intracavity gain enables the realization of active Kerr resonators, thereby relaxing some of the constraints imposed by passive cavities.This concept has been experimentally demonstrated in erbium-doped resonators [ 9 , 33 ] and quantum cascade laser cavities [ 4 , 29 , 22 ] , yielding reduced soliton thresholds and enhanced conversion efficiencies at the cost of accumulated amplified spontaneous emission (ASE). Raman gain is an attractive option as a gain mechanism for active cavities due to its broadband nature, lack of material doping requirements, and favorable saturation characteristics [ 14 , 2 ] . While Raman amplification is a cornerstone of loss compensation in long-haul telecommunications [ 27 , 20 ] and enables direct soliton generation in various configurations [ 25 , 32 ] , its influence on the dynamics of coherently driven resonators has only recently begun to be explored. Raman gain in copropagating scheme has recently been used in silica microresonators to reduce effective loss, improve conversion efficiency, lower soliton thresholds, and to engineer transitions in Raman Kerr comb dynamics [ 24 , 21 ] . Figure 1: (a). Experimental setup. CW laser: 1555 nm laser, EDFA: Erbium doped fiber amplifier, BPF: Optical bandpass filter, PC: polarization controller, ISO: polarization independent dual stage isolator, WDM: wavelength division multiplexer, Photodetectors PD1, PD3: 200 kHz , PD2: 1 GHz, PID: servo controller, OSA: optical spectrum analyzer 20 pm resolution, OSC: 1 GHz oscilloscope, ESA: electronic spectrum analyzer 43.5 GHz. (b) Linear cavity characterization: drop-port normalized transmission vs Raman pump power, showing the progressive increase of the effective finesse. The solid curve is a guide to the eye. The inset illustrates a single cavity ringdown measurement, corresponding to a single data point on the effective finesse curve. In this work, we investigate Raman amplification as a loss compensation mechanism enabling nonlinear pattern formation, specifically temporal cavity solitons. Using a low-finesse cavity, for which soliton excitation is experimentally difficult to achieve under continuous-wave driving, we demonstrate that distributed Raman amplification can serve as a tunable control parameter for accessing the nonlinear regime. We define an effective finesse and connect it to soliton existence, spectral structure, and noise-limited stability. The experimental setup is shown in Fig. 1 (a). The resonator consists of a 357 m single-mode fiber (SMF-28) ring, with a free spectral range (FSR) of 580.25 kHz and a total group-velocity dispersion of \beta_{2}L=-7.85 ps 2 at 1555 nm. Raman amplification is implemented using a counter-propagating pump at 1455 nm with a spectral width of approximately 200 GHz, which is injected into and extracted from the ring via wavelength-division multiplexers (WDMs). In the absence of Raman pumping, the roundtrip power loss is \approx 36\% , corresponding to a passive finesse of \mathcal{F}\approx 17 . The cavity is coherently driven by a narrow-linewidth (Koheras Adjustik) continuous-wave (CW) laser at 1555 nm, which is amplified to 56 mW and coupled into the resonator through a 95/5 input coupler. A 99/1 output coupler provides access to the intracavity field for spectral and temporal characterization, while an optical isolator suppresses stimulated Brillouin scattering. The detuning between the CW laser and a cavity resonance is actively stabilized using a frequency-shifted control signal injected on the orthogonal polarization mode together with a servo controller. Furthermore, the cavity is placed in a temperature controlled box (Silentsys) to minimize thermally induced phase variations. Temporal cavity solitons are individually excited via cross-phase modulation from an auxiliary single-pulse source [ 23 ] , which is not shown in Fig. 1 . To quantify the impact of Raman amplification on the effective photon lifetime t_{\text{ph}} and quality factor Q_{\mathrm{eff}} , we perform cavity ringdown measurements at low driving powers ( \approx 600\penalty\ \mu W) [ 7 , 19 ] . Sweeping the laser frequency faster than the cavity decay rate excites a transient "ringing" response [see Fig. 1 (b) inset]. For each Raman pump power, we extract the intracavity energy decay by demodulating this signal via a Hilbert transform; fitting the resulting envelope with e^{-t/t_{\text{ph}}} yields the effective photon lifetime. Unlike the cold cavity lifetime, this t_{\text{ph}} accounts for the competition between intrinsic passive losses and active Raman gain. From t_{\mathrm{ph}} , we extract the effective roundtrip loss \Lambda_{\mathrm{eff}}=t_{R}/t_{\mathrm{ph}} , where t_{R}=1/\mathrm{FSR}\approx 1.72\penalty\ \mu\text{s} is the cavity roundtrip time, and the corresponding effective finesse \mathcal{F}_{\rm eff}=2\pi/\Lambda_{\rm eff} . Figure 1 (b) shows the evolution of \mathcal{F}_{\text{eff}} versus Raman pump power. While the passive cavity exhibits \mathcal{F}\approx 17 , Raman amplification extends t_{\text{ph}} by over an order of magnitude, reaching \mathcal{F}_{\text{eff}}\approx 800 . This corresponds to an effective resonance linewidth \Delta\nu=\mathrm{FSR}/\mathcal{F_{\rm eff}}\approx 725 Hz and an effective Q_{\mathrm{eff}}=\nu_{0}/\Delta\nu\approx 2.7\times 10^{11} at \lambda_{0}=1555 nm. Figure 2: Laser detuning scans at the (a) drop and (b) through ports show that increasing Raman pump power (at fixed driving power 56 mW) widens soliton steps, reflecting increased effective finesse. Inset in (a): Dashed lines represent co-propagating resonances and solid lines counter propagating resonances at a pump power of 34.37 dBm. We proceed to the nonlinear regime by increasing the driving power, with the aim of exploiting the resulting enhancement of the effective finesse to study pattern formation,

Read the complete text