Photonic qubit encoding interconversion for heterogeneous quantum networking

Vedansh Nehra, Richard J. Birrittella, Christopher C. Tison, Benjamin K. Malia, Zachary S. Smith, Dylan Heberle, Nicholas J. Barton, Amos Matthew Smith, Andrew Brownell, Michael L. Fanto, James Schneeloch, Erin Sheridan, David Hucul · 2026

Read Photonic qubit encoding interconversion for heterogeneous quantum networking by Vedansh Nehra, Richard J. Birrittella, Christopher C. Tison, Benjamin K. Malia, Zachary S. Smith, Dylan Heberle, Nicholas J. Barton, Amos Matthew Smith, Andrew Brownell, Michael L. Fanto, James Schneeloch, Erin Sheridan, David Hucul (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2604-02081.txt.

Introduction

Nehra and colleagues convert photon qubit encoding between polarization and time bin bases to link nodes. Quantum networks use platforms with other codes, and sharing entanglement requires matching basis codes. Their protocol converts polarization to time bin code, sends photons through a shaky fiber, then converts back for readout. The scheme carries a polarization Bell state across the fiber, turning infidelity into rate changes. The result offers a way to link distinct platforms for modular mixed networks.

Catalog record

CREATORVedansh Nehra, Richard J. Birrittella, Christopher C. Tison, Benjamin K. Malia, Zachary S. Smith, Dylan Heberle, Nicholas J. Barton, Amos Matthew Smith, Andrew Brownell, Michael L. Fanto, James Schneeloch, Erin Sheridan, David Hucul
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE24699
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2604.02081

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Photonic qubit encoding interconversion for heterogeneous quantum networking Vedansh Nehra, Richard J. Birrittella, Christopher C. Tison, Benjamin K. Malia, Zachary S. Smith, Dylan Heberle, Nicholas J. Barton, Amos Matthew Smith, Andrew Brownell, Michael L. Fanto, James Schneeloch, Erin Sheridan, David Hucul Abstract Quantum information processing, communication, and sensing networks are being developed with various qubit platforms that use different encoding schemes. Connecting quantum network nodes to distribute entanglement requires matching photon qubit basis encoding. In this work, we implement an interconversion protocol which converts photon qubit encoding from the polarization basis to the time-bin basis, transmits the photons through a transport fiber with large fluctuations in polarization, and converts back to polarization encoding for ease of measurement. This interconversion scheme faithfully transmits a polarization Bell state across the transport fiber by converting sources of infidelity to changes in transmission rate. These results illustrate a practical approach for interfacing distinct qubit platforms to enable modular and flexible operation in heterogeneous quantum networks. Figure 1: Representation of a heterogeneous quantum network and photonic qubit interconversion protocol. (a) Four example qubit platforms supporting varied photonic qubit basis encodings can interfere with each other via photon encoding interconversion. Additionally, encoding interconversion can be used to convert polarization encoding to time-bin encoding, suitable for long haul photon transmission. Time-bin qubits are converted back to polarization basis before detection for ease of measurement, as shown with photons from the ion trap node. (b) Idler photons from a polarization Bell state produced from a PIC source are sent through interconversion modules connected via a transport fiber. Signal photons are routed directly to a two qubit QST module for analysis. Heterogeneous quantum networks (HQNs) with optical interconnects offer an avenue towards scaling quantum processing power 6 ; 2 ; 24 ; 22 , creating quantum sensor arrays 43 ; 30 , and connecting disparate quantum networks at a distance 23 ; 15 ; 18 ; 12 ; 7 ; 17 ; 9 . To realize these applications, photons emitted by different qubit platforms must interfere to establish entanglement across network nodes. However, these photons may have different wavelengths, bandwidths, and encoding types. Even after matching wavelength and wavepacket shape, matching photon encoding type will be necessary. For example, depending on the atomic species, trapped-ion platforms support several qubit encoding bases, including frequency, time-bin, and polarization degrees of freedom 26 ; 32 ; 5 ; 10 ; 20 ; 28 . On the other hand, the transduction of superconducting systems from the microwave to optical photons naturally makes use of time-bin encoding 19 ; 13 ; 34 , limiting the creation of high fidelity entanglement between superconducting and trapped ion qubits with different encoding types. Developing reliable qubit encoding interconversion protocols and modules as shown in Fig. 1 (a) is therefore a key step towards linking otherwise incompatible quantum network nodes 11 . In addition, qubit basis conversion may aid in robust transmission of photonic qubits. Polarization-encoded photons are susceptible to time-dependent birefringence induced by environmental variations when transmitted over long distances in fibers, requiring active polarization stabilization to compensate for polarization drifts 40 ; 38 ; 4 ; 8 . Transferring to time-bin encoding (see photon emission from ion trap node in Fig. 1 (a) ) relaxes polarization control requirements 31 ; 21 ; 42 . In this work, we implement qubit basis interconversion modules for polarization and time-bin qubits at telecommunication wavelengths (see Fig. 1 (b) ). We generate polarization Bell states and show that by changing the qubit encoding from polarization to time-bin, we make the qubits less susceptible to polarization drifts. The time-bin encoded qubit is then transported over a short transport fiber wound around a polarization controller to induce birefringence. When converting back to polarization, variations in birefringence change the overall photon count rate rather than qubit state fidelity. This was confirmed by quantum state tomography (QST); measurements show the two-qubit Bell state fidelity remained approximately constant at 0.94 \pm 0.01. We use a photonic integrated circuit (PIC) to generate pairs of entangled photons (biphotons) via spontaneous four-wave mixing (SFWM) in silicon waveguides (see Fig. 2 ) 37 . Two pump photons from a narrow-band, continuous wave (CW) laser at 1550\text{\,}\mathrm{nm} produce phase-matched signal-idler photon pairs of the same polarization with spectrally anti-correlated frequencies \omega_{s} , \omega_{i} . We spectrally filter the signal and idler photons around 1530\text{\,}\mathrm{nm} and 1570\text{\,}\mathrm{nm} , respectively. Figure 2: Diagram for polarization Bell state generation using PIC. Amplified pump light is coupled to the chip and distributed via cascaded 1\times 2 splitters. Spectrally entangled biphotons generated by SFWM from two spiral waveguides, having the state \ket{H_{s}H_{i}} , are combined using an FPBS. The relative phase between the spirals is stabilized to generate the Bell state \ket{\phi^{+}} (Eq. 2 ). To increase Bell state fidelity, we balance attenuation between both arms of the interferometer by controlling the amount of light that gets coupled to the output of the FPBS using manual polarization controllers (MPC). The PIC utilizes cascaded 1\times 2 splitters 25 ; 35 with four outputs 33 . We use two outputs from the PIC to generate a polarization entangled Bell state using an interferometric setup shown in Fig. 2 . A CW pump laser is routed through an erbium-doped fiber amplifier (EDFA) and spectrally filtered using a dense wavelength division multiplexer (DWDM) (ITU standard C34 channel at 1550.12 nm). Since the biphoton production efficiency from one spiral waveguide is low ( \eta=10^{-12} biphotons per pump pair), the probability of simultaneously generating biphotons in both spirals 2 and 3 in Fig. 2 is of order \epsilon=10^{-24} . Thus, pumping both spirals 2 and 3 via the cascaded 1\times 2 splitters leads to a path-entangled N00N state 35 described by: \ket{N00N}=\frac{1}{\sqrt{2}}\Big(\ket{\psi,0}_{2,3}+\ket{0,\psi}_{3,2}\Big) (1) where \ket{\psi}=\ket{H_{s}H_{i}} and \ket{\psi,0}_{2,3} ( \ket{0,\psi}_{3,2} ) indicates biphoton generation in spiral 2 (3) and no biphoton generation in spiral 3 (2). A fiber polarizing beam splitter (FPBS) combines photons from the two spirals, with manual polarization controllers (MPCs) in a Quarter-Half-Quarter waveplate (QHQ) configuration before the FPBS inputs to rotate polarization and control photon transmission through the FPBS, thereby balancing H_{s}H_{i} and V_{s}V_{i} photon counts. The resulting output is a polarization entangled Bell state: \ket{\phi^{+}}=\frac{1}{\sqrt{2}}(\ket{H_{s}H_{i}}+e^{i\phi}\ket{V_{s}V_{i}}) (2) where \phi denotes the relative phase between the biphotons generated from the two spirals and H_{s} ( V_{s} ), H_{i} ( V_{i} ), denotes the horizontal (vertical) polarization of the signal and idler photons respectively. The FPBS output is routed through a coarse wavelength division multiplexer (CWDM) with channel bandwidths of 8\text{\,}\mathrm{nm} , center wavelength separations of 20\text{\,}\mathrm{nm} , adjacent channel isolation >$30\text{\,}\mathrm{dB}$ and non-adjacent channel isolation of >$40\text{\,}\mathrm{dB}$ . We use the 1530\;\mathrm{nm} and 1570\;\mathrm{nm} channels to select the signal (s) and idler (i) wavelengths at 1530\text{\,}\mathrm{nm} and 1570\text{\,}\mathrm{nm} , respectively, and the CWDM directs the 1550\text{\,}\mathrm{nm} pump light to a photodiode through a polarizer. The resulting interference of the pump light provides feedback to the phase shifter to stabilize relative path length difference of the interferometer arms 42 , thereby stabilizing \phi . The idler photons pass through a 1\;\mathrm{nm} bandwidth filter set at 1570\text{\,}\mathrm{nm} , and the signal photons go through two 1530\text{\,}\mathrm{nm} CWDM channels to further filter the pump from the signal-idler outputs. To quantify quality of

Read the complete text