Distribution function-based modelling of discrete kinematic datasets , in application to the Milky Way nuclear star cluster

Eugene Vasiliev, Anja Feldmeier-Krause, Mattia C. Sormani · 2026

Read Distribution function-based modelling of discrete kinematic datasets , in application to the Milky Way nuclear star cluster by Eugene Vasiliev, Anja Feldmeier-Krause, Mattia C. Sormani (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-29502.txt.

Introduction

Vasiliev and co-authors model the Milky Way's nuclear star cluster with distribution functions. Their method builds dynamical models from discrete star data. It can pin down mass even when tracer density and selection effects are unknown. They apply it to a few thousand stars near the central black hole. Sight-line speeds and proper motions feed the model. The black hole mass comes out near four million solar masses. The value matches the precise GRAVITY result within errors. Total mass inside ten parsecs is tightly constrained.

Catalog record

CREATOREugene Vasiliev, Anja Feldmeier-Krause, Mattia C. Sormani
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE101155
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2603.29502

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Distribution function-based modelling of discrete kinematic datasets , in application to the Milky Way nuclear star cluster Eugene Vasiliev, Anja Feldmeier-Krause, Mattia C. Sormani Abstract We present a method for constructing dynamical models of stellar systems described by distribution functions and constrained by discrete-kinematic data. We implement various improvements compared to earlier applications of this approach, demonstrating with several examples that it can deliver meaningful constraints on the mass distribution even in situations when the density profile of tracers and the selection function of the kinematic catalogue are unknown. We then apply this method to the Milky Way nuclear star cluster, using kinematic data (line-of-sight velocities and proper motions) for a few thousand stars within 10 pc from the central black hole, accounting for the contributions of the nuclear stellar disc and the Galactic bar. We measure the mass of the black hole to be 4 × 10 6 ​ M ⊙ 4\times 10^{6}\,M_{\odot} with a 10% uncertainty, which agrees with the more precise value obtained by the GRAVITY instrument. The inferred stellar mass profile depends on the choice of kinematic data, but the total mass within 10 pc is well constrained in all models to be (2.0–2.3) × 10 7 ​ M ⊙ \times 10^{7}\,M_{\odot} . We make our models publicly available as part of the Agama software framework for galactic dynamics. show][email protected] I Introduction The centre of our Galaxy contains two exciting objects: the supermassive black hole (SMBH) Sgr A ⋆ of mass M_{\bullet}\approx 4.3\times 10^{6}\,M_{\odot} ( GRAVITY Collaboration 2022 ) and the surrounding nuclear star cluster (NSC). The NSC, in turn, is embedded in the nuclear stellar disc (NSD), which extends up to a couple hundred pc (see, e.g., Schultheis et al. 2025 for a review), and at even larger distances (a few kpc), by the Galactic bar, then the Galactic stellar disc and halo, and finally the rest of the known Universe. NSCs frequently coexist with SMBHs in galaxies of Milky Way mass or lower (see section 8 in Neumayer et al. 2020 ), but only in our Galaxy we have the luxury of being able to measure the SMBH mass from orbital fits to multi-epoch observations of stars in close proximity to it ( Ghez et al. 2008 ; Genzel et al. 2010 , e.g.,) . In other stellar systems, the mass of the central SMBH is usually inferred from a single kinematic snapshot with integrated-light spectroscopic data of unresolved stellar populations. In rare cases (globular clusters or satellite galaxies of the Milky Way), one can work with line-of-sight velocity ( V_{\textrm{LOS}} ) or proper motion (PM) measurements of resolved stars ( den Brok et al. 2014 , e.g.,) , but even then the dynamical inference must rely on a single kinematic snapshot, which almost always requires an assumption of equilibrium to make progress in constraining the gravitational potential (mass distribution) of the system. In the Milky Way, individual stars tightly bound to Sgr A ⋆ have been monitored over more than two decades, and some stars (notably, S2) have completed more than one orbit during this time, enabling very precise measurements of not only M_{\bullet} (at a sub-percent level), but even higher-order corrections, e.g., due to general relativity effects ( GRAVITY Collaboration 2018 ; GRAVITY Collaboration 2020 ) . By contrast, methods relying on the equilibrium modelling of the NSC stars at larger distances usually produce much larger uncertainties on the SMBH mass, and in many studies the inferred M_{\bullet} has been biased low by up to 50% (see the introduction section in Magorrian 2019 for an overview of prior work). Despite this mixed success in the galaxy we know best, values of SMBH masses in external galaxies determined from stellar kinematics often come with fairly small error bars (sometimes \lesssim 10\% ), even though the quality of observational data is clearly inferior to the Milky Way. Except a few megamaser galaxies, such as NGC 4258 ( Miyoshi et al. 1995 ) , there are no other systems in which the SMBH mass can be measured with comparable accuracy to Sgr A ⋆ to provide the “true” answer for benchmarking stellar-dynamical or other mass measurement methods. The landscape of stellar-dynamical modelling methods is discussed in more detail in Section II.1 , and in this work, we use the approach based on distribution functions (DFs) with specific analytic forms and tunable parameters (Sections II.2 and II.3 ). Our models have separate DFs for the innermost component (NSC) and the surrounding NSD, but we fix the parameters of the NSD to the ones found in a recent paper ( Sormani et al. 2022a ) . The latter study used kinematic data on larger scales (10–300 pc) and thus aimed at determining the parameters of the NSD while treating the NSC as a fixed mass component. While the modelling method used in that paper is largely the same, in the present work we have implemented significant upgrades that deserve a detailed description, which is given in Section III . In particular, we consider a scenario in which the spatial coverage of kinematic data is non-uniform and not representative of the underlying stellar distribution, and the spatial density profile of kinematic tracers is unavailable. We demonstrate with several tests on mock data that one can derive meaningful constraints on the gravitational potential even in this case, which has received little attention in the previous literature. Our modelling workflow relies on the Agama framework for galactic dynamics ( Vasiliev 2019a ) , and various technical details mentioned throughout the paper, such as class and parameter names, refer to the Python interface for Agama . The observational data used to constrain our models consist of a few \times 10^{3} stars within 10 pc from Sgr A ⋆ described in Section IV . This is a subset of the sample used in Feldmeier-Krause et al. 2025 , but that work employed a different approach (axisymmetric Jeans models). Given that the data are shared between this and our work, we largely focus on the DF-based modelling approach, which has not been used for the NSC previously. As explained above, the NSC is not only interesting by itself, but also serves as a testbed for SMBH mass measurements from stellar kinematics. The present study thus has two main objectives: (1) introduce a practical method for construction of DF-based equilibrium dynamical models constrained only by discrete kinematic data (i.e. line-of-sight velocities and PMs of individual stars, but not their density profile), and (2) apply it to the Milky Way NSC, test the accuracy of recovery of the SMBH mass, and provide the first DF-based model of this system. Sections II and III fulfill the first goal, and sections IV and V apply the method to the NSC. Section VI summarises our findings. II Construction of dynamical models II.1 Overview of methods Several approaches have been used for modelling the Milky Way NSC and NSD in the past. Most studies relied on the Jeans equations, either spherical ( Schödel et al. 2009 ; Do et al. 2013b ; Chatzopoulos et al. 2015a ; Fritz et al. 2016 , e.g.,) or axisymmetric ( Feldmeier et al. 2014 ; Chatzopoulos et al. 2015a ; Sormani et al.

Read the complete text