Development of Pixelated Capacitive-Coupled LGAD (ACLGADpix) Detectors Journal: Nuclear Physics B
Koji Nakamura, Yua Murayama, Issei Horikoshi, Mahiro Kobayashi, Koji Sato · 2026
Read Development of Pixelated Capacitive-Coupled LGAD (ACLGADpix) Detectors Journal: Nuclear Physics B by Koji Nakamura, Yua Murayama, Issei Horikoshi, Mahiro Kobayashi, Koji Sato (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-29250.txt.
Introduction
Nakamura and co-authors report progress on pixelated detectors for future colliders. Their device builds on the Low-Gain Avalanche Diode, known for timing near 20 picoseconds. Capacitive coupling aims to add fine spatial resolution. The new ACLGADpix has pixels of 100 by 100 micrometers. Timing stayed uniform across the active area. The team tested prototypes with beta rays and an infrared laser. A 3 GeV electron beam test also ran. They discuss readout electronics for collider use.
Catalog record
| CREATOR | Koji Nakamura, Yua Murayama, Issei Horikoshi, Mahiro Kobayashi, Koji Sato |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 15058 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2603.29250
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Development of Pixelated Capacitive-Coupled LGAD (ACLGADpix) Detectors Journal: Nuclear Physics B Koji Nakamura, Yua Murayama, Issei Horikoshi, Mahiro Kobayashi, Koji Sato Abstract The Low-Gain Avalanche Diode (LGAD) is a semiconductor detector capable of achieving excellent timing resolution ( 20 ps) for minimum ionizing particles (MIPs). To realize a pixelated detector with both high timing precision and spatial resolution, we have been developing Capacitive-Coupled LGADs (ACLGADs) for future collider experiments, such as the latter phase of the High-Luminosity LHC. We have successfully fabricated a pixelated ACLGAD (ACLGADpix) with a 100 µm × \times 100 µm pixel pitch, maintaining uniform timing performance across the active area. In this presentation, we will report recent measurement results from ACLGADpix prototypes using beta rays, an infrared laser, and a 3 GeV electron beam. We will also discuss potential readout electronics for future collider applications. 1 Introduction Future collider experiments such as the HL-LHC and proposed next-generation colliders will face unprecedented track densities due to severe pileup conditions. At the HL-LHC, 140–200 interactions per bunch crossing are expected, while future hadron colliders may exceed 1000 interactions per bunch crossing. Under such conditions, conventional tracking detectors relying solely on spatial information suffer from ambiguities in track reconstruction. The addition of precise timing information at the level of tens of picoseconds enables so-called 4D tracking, significantly improving pattern recognition by separating tracks in both space and time. In future collider experiments, precise spatial information alone will not be sufficient under severe pileup conditions; timing information must be combined with high-granularity position measurements in order to associate tracks with their correct interaction vertices. While excellent spatial resolution is already achievable with conventional silicon pixel detectors, realizing a detector that simultaneously provides fine spatial granularity and \mathcal{O}(10) ps timing resolution remains a major challenge. Low Gain Avalanche Diodes (LGADs) have demonstrated outstanding timing performance, achieving resolutions of around 30 ps for minimum ionizing particles in pad-type sensors [ 8 , 4 , 2 , 6 , 3 , 7 ] . However, in conventional segmented LGADs, fine segmentation requires junction termination extensions and isolation structures, which increase the inactive area. As the pitch becomes smaller, this dead area rapidly becomes dominant, making such devices unsuitable for true fine-pitch pixel tracking applications. The AC-coupled LGAD (AC-LGAD) concept was developed to overcome this limitation by employing a continuous gain layer combined with capacitive coupling to segmented readout electrodes [ 5 ] . This architecture preserves full fill factor while enabling position reconstruction through segmented readout and charge sharing between neighboring electrodes. Based on this concept, we have developed pixelated AC-LGAD detectors with a pitch of 100 µm \times 100 µm . In this paper, we present the first comprehensive experimental study of pixelated AC-LGAD detectors, which represents a key step from the sensor concept to a realistic 4D pixel detector. 2 Fabrication of Pixelated AC-LGAD Detectors The pixelated AC-LGAD sensors studied in this work were fabricated by Hamamatsu Photonics K.K. in collaboration with the KEK–Tsukuba group. Figure 1 compares the structures of a conventional segmented LGAD (top) and an AC-LGAD (bottom). Figure 1: Comparison of the structures of a conventional segmented LGAD (top) and an AC-LGAD (bottom). In the AC-LGAD, the gain layer is continuous over the full active area and the signal is read out through AC-coupled segmented electrodes. The development of AC-LGAD technology was motivated by a limitation of conventional segmented LGADs. As illustrated in the top part of Fig. 1 , standard LGAD structures require junction termination extensions and isolation structures between neighboring electrodes. As the segmentation becomes finer, the relative fraction of inactive area increases, making such devices unsuitable for fine-pitch pixel detectors despite their excellent timing performance. The AC-LGAD concept was developed to overcome this limitation. As shown in the bottom part of Fig. 1 , the gain layer is formed continuously across the sensor area, while the signal is read out through segmented metal electrodes placed above a dielectric layer. This architecture preserves full fill factor and enables position-sensitive readout without introducing dead regions associated with segmented gain structures. The amplified signal is transferred capacitively to the metal electrodes, while part of the signal can spread laterally through the resistive n + layer to neighboring channels. The detector response is therefore governed by the balance between the coupling capacitance and the sheet resistance of the n + layer, which determines the signal amplitude, charge sharing, and crosstalk. Based on this principle, several prototype productions were carried out to optimize the key design parameters, including the oxide thickness, the n + doping concentration, and the gain-layer doping. These parameters were tuned to obtain sufficiently large signal amplitude, stable gain at practical bias voltages, and controlled charge sharing with limited crosstalk. The resulting design, established in our previous study [ 5 ] , provided the basis for the pixelated sensors investigated here. In this work, we focus on AC-LGAD sensors with a pixel pitch of 100 µm \times 100 µm and an active thickness of 20 µm . The use of a thin active layer helps to improve the intrinsic timing performance, since the fluctuation in signal formation time caused by non-uniform charge deposition through the sensor thickness is reduced. The devices used in this work were selected from that sensor production primarily on the basis of sensor thickness and signal-to-noise ratio. 2.1 Beta-ray Measurement Setup The intrinsic timing performance of the pixelated AC-LGAD detectors was evaluated using a 90 Sr beta-ray source. A schematic of the experimental setup is shown in Fig. 2 . Figure 2: Experimental setup for the 90 Sr beta-ray measurement. An MCP-PMT is used as the timing reference. A Hamamatsu R3809U-52 microchannel-plate photomultiplier tube (MCP-PMT) was used as the external timing reference. This device has a typical transit-time spread of 25 ps and a typical rise time of 160 ps. In our setup, its timing contribution was sufficiently small compared with that of the detector under test and was therefore neglected in the evaluation of the AC-LGAD timing resolution. The AC-LGAD signals were amplified with a 16-channel discrete amplifier board based on 2 step RF amplifiers. The amplified detector signals and the MCP-PMT reference signal were digitized with a Teledyne LeCroy WaveRunner 8208HD oscilloscope, which provides 2 GHz analog bandwidth, 8 input channels, 12-bit ADC resolution, and a sampling rate of 10 GS/s. The hit time was extracted with a 50% constant-fraction method for both the AC-LGAD and MCP-PMT waveforms, and the timing resolution was obtained from the distribution of the time difference between the two signals. Since the MCP-PMT timing resolution is approximately 10 pico second, no correction for the reference contribution was applied. 2.2 Electron Beam Test at the KEK PF-AR Test Beam Line Beam tests were carried out at the KEK PF-AR test beam line, a facility at the KEK Tsukuba campus that provides electron beams in the energy range from about 0.5 to 6.5 GeV for detector-development studies. In the present measurements, a 3 GeV electron beam was typically used [ 9 ] . The experimental setup included a tracking telescope composed of FE-I4 and MALTA2 pixel detectors. The FE-I4 sensors were based on the readout chip originally developed for the ATLAS Insertable B-Layer (IBL), with pixel sizes of