Design of an embedded hardware platform for cell-level diagnostics in commercial battery modules
GABRIELE MARINI \authorrefmark 1, ALESSANDRO COLOMBO \authorrefmark 2, ANDREA LANUBILE \authorrefmark 1, WILLIAM A. PAXTON \authorrefmark 3, and SIMONA ONORI \authorrefmark 1, SENIOR MEMBER, IEEE · 2026
Read Design of an embedded hardware platform for cell-level diagnostics in commercial battery modules by GABRIELE MARINI \authorrefmark 1, ALESSANDRO COLOMBO \authorrefmark 2, ANDREA LANUBILE \authorrefmark 1, WILLIAM A. PAXTON \authorrefmark 3, and SIMONA ONORI \authorrefmark 1, SENIOR MEMBER, IEEE (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-29107.txt.
Introduction
Marini and co-authors design a hardware platform for testing single cells inside battery modules. Studying cells inside a full pack is hard without taking the pack apart. Their platform was built for the Audi e-tron battery pack. It combines voltage sensors, balancing circuits, and a microcontroller. The team screened cells across all 36 modules of the pack. Cell voltages were held to a set reference value. The platform supports safe health checks and later pack reuse.
Catalog record
| CREATOR | GABRIELE MARINI \authorrefmark 1, ALESSANDRO COLOMBO \authorrefmark 2, ANDREA LANUBILE \authorrefmark 1, WILLIAM A. PAXTON \authorrefmark 3, and SIMONA ONORI \authorrefmark 1, SENIOR MEMBER, IEEE |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 54811 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2603.29107
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Design of an embedded hardware platform for cell-level diagnostics in commercial battery modules GABRIELE MARINI \authorrefmark 1, ALESSANDRO COLOMBO \authorrefmark 2, ANDREA LANUBILE \authorrefmark 1, WILLIAM A. PAXTON \authorrefmark 3, and SIMONA ONORI \authorrefmark 1, SENIOR MEMBER, IEEE Abstract While battery aging is commonly studied at the cell-level, evaluating aging and performance within battery modules remains a critical challenge. Testing cells within fully assembled modules requires hardware solutions to access cell-level information without compromising module integrity. In this paper, we design and develop a hardware testing platform to monitor and control the internal cells of battery modules contained in the Audi e-tron battery pack. The testing is performed across all 36 modules of the pack. The platform integrates voltage sensors, balancing circuitry, and a micro-controller to enable safe, simultaneous cell screening without disassembling the modules. Using the proposed testing platform, cell voltage imbalances within each module are constrained to a defined reference value, and cell signals can be safely accessed, enabling accurate and non-invasive cell-level state-of-health assessments. On a broader scale, our solution allows for the quantification of internal heterogeneity within modules, providing valuable insights for both first- and second-life applications and supporting efficient battery pack maintenance and repurposing. \receiveddate XX Month, XXXX \reviseddate XX Month, XXXX \accepteddate XX Month, XXXX \publisheddate XX Month, XXXX \currentdate XX Month, XXXX \doiinfo OJPEL.2022.0817315 \corresp CORRESPONDING AUTHOR: Simona Onori (e-mail: [email protected]). \authornote G. Marini and A. Colombo contributed equally to this work. This work is supported by VW Group of America, Inc. {IEEEkeywords} Embedded hardware, battery systems, Li-ion, module testing, balancing, monitoring. 1 INTRODUCTION \IEEEPARstart The electric vehicle (EV) market has experienced exponential growth in recent years, and this trend is likely projected to continue as EVs play a crucial role in global decarbonization efforts [ 24 ] . This growth has driven significant advancements in lithium-ion batteries (LIBs), which are renowned for their long cycle life, high energy density, and low self-discharge rates [ 9 ] . These characteristics have made LIBs indispensable across various sectors other than transportation, such as consumer electronics, medical equipment, power tools, renewable energy storage systems and data centers [ 12 ] . LIB packs are arranged in modules, each comprising multiple cells connected electrically and thermally, and meeting high energy requirements requires a large population of interconnected components. Consequently, small cell-to-cell electrochemical differences can translate into non-homogeneous behavior (e.g., uneven current sharing among parallel-connected cells and voltage imbalance among series-connected cells) and can propagate from cell to module and pack, ultimately affecting pack performance and lifetime. For these reasons, internal pack screening and diagnostics are essential for assessing variability and ensuring reliable operation. Such screening can be performed either at the cell level or at the module/pack level [ 28 , 4 ] . Heterogeneity characterization becomes even more critical for battery repurposing, i.e., when EV battery packs approaching the end of their service life are reused in less demanding second-life applications (e.g., commercial/industrial energy storage systems) [ 17 , 23 , 6 , 38 ] , where identifying underperforming and close to failure components is key to enabling reliable battery reuse. In the remainder of the paper, we adopt the x P y S notation to indicate the module/pack topology, where x denotes the number of cells connected in parallel (to form a parallel array) and y denotes the number of such parallel arrays connected in series. When either x or y equals 1, it is omitted. The open literature reports module-level testing conducted either on laboratory-built modules or on commercially available systems. In the case of lab-built modules, small, low-voltage configurations (up to 5 V) composed of parallel-connected cells have attracted increasing attention. For example, [ 14 ] investigates the effects of thermal gradients on current distribution, while [ 25 ] analyzes their impact on cell degradation. In addition, [ 21 ] compares different module topologies to evaluate the effectiveness of air ventilation, and [ 22 ] examines thermal runaway propagation in parallel-connected cells. A number of studies focus on current imbalances in parallel configurations driven by multiple factors. In [ 13 ] , current distribution is examined between LiFePO 4 and Li(NiCoAl)O 2 cells, while [ 18 ] proposes mitigating these imbalances through the introduction of a controllable interconnection resistance. Similarly, [ 32 ] models the impact of cell inconsistencies on current distribution and validates the approach on aged cells, whereas [ 16 ] investigates the influence of current-collector geometry and resistance. In [ 34 ] , current imbalances and their impact on degradation are analyzed in a 2P array. [ 30 ] investigates capacity and resistance heterogeneities in a 4P module with Hall-sensor-based current measurements (dataset in [ 29 ] ), while [ 35 ] uses Differential Voltage Analysis (DVA) to reveal imbalance effects on differential-voltage features. For series-connected cells, [ 22 ] investigates thermal-runaway propagation in a 9S module configuration, and [ 2 ] studies aging propagation in a 4S string. [ 31 ] introduces a fully instrumented, reconfigurable module (up to 8S/8P) to track current, voltage, and energy distributions over aging. Finally, [ 27 ] develops a 504-cell pack for a prototype EV and uses pack-level data for fault detection. In contrast, academic studies on commercially available battery modules are limited, primarily due to the need for high-voltage testing equipment. In [ 36 ] , a screening method is proposed for a retired EV pack, although it does not resolve individual cell properties. [ 33 ] investigates modules from a Volkswagen ID.3 Pro Performance pack, where cell-level data are obtained through irreversible disassembly, followed by individual cell testing within the module casing to preserve mechanical and thermal conditions. Similarly, [ 8 ] analyzes modules from a Mercedes-Benz Vito e-Cell pack via accelerated module-level aging and periodic cell-level reference tests, requiring repeated disassembly and reassembly. [ 37 ] conducts accelerated aging tests at the module and pack levels using modules manufactured by Lishen Battery Company Ltd. to develop a state-of-health (SOH) estimator. Overall, these studies rely on module disassembly to access cell-level signals. To date, the only openly reported example enabling non-destructive internal module access is the Nissan Leaf 2P2S module, which incorporates a third terminal providing direct electrical access to each 2P block [ 1 , 15 , 11 ] . To the best of the authors’ knowledge, a non-disruptive hardware platform for cell-level screening of series-connected cells within commercial modules is still unavailable. This work addresses this gap by introducing a custom-designed, low-power embedded system capable of non-invasively measuring individual cell voltages without opening the module casing. The platform also integrates cell balancing functionalities to enhance safety and reliability. Building on these measurements, we propose a methodology to quantify cell heterogeneities in terms of capacity, energy, and resistance. The paper is organized as follows: Section II presents the experimental setup; Section III details the methodology for extracting cell-level metrics; Section IV reports the analysis across all cells; and Section V concludes the paper. 2 EXPERIMENTAL SETUP AND DESIGN This section is organized as follows: module configuration, battery cycling equipment, embedded monitoring and balancing circuitry, and testing profile design. Figure 1: Schematic 4P3S topology; v_{1} , v_{2} , v_{3} are the Cells terminal voltage; I_{m} module current; V_{m} module voltage.