The First OpenFOAM ® HPC Challenge (OHC-1)
Sergey Lesnik 1, Gregor Olenik 2, Mark Wasserman 3 · 2026
Read The First OpenFOAM ® HPC Challenge (OHC-1) by Sergey Lesnik 1, Gregor Olenik 2, Mark Wasserman 3 (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-27565.txt.
Introduction
Lesnik and co-authors report the first OpenFOAM HPC Challenge, organised by the OpenFOAM HPC Technical Committee. All ran one shared car-cooling flow case, the open-closed cooling DrivAer case. Hardware entries used the stock setup on set meshes. Software entries could tune solvers or use accelerators. Runs spanned one node up to 256 nodes, with 237 valid data points in all. The fastest run took 7.8 minutes in total. The slowest took 65.7 hours in all. Energy use ran from 2.1 to 236.9 kilowatt-hours. On-package high-bandwidth memory ruled single-node speed.
Catalog record
| CREATOR | Sergey Lesnik 1, Gregor Olenik 2, Mark Wasserman 3 |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 38390 |
| LICENSE | http://creativecommons.org/licenses/by-sa/4.0/ |
| RIGHTS | CC BY SA |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2603.27565
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
The First OpenFOAM ® HPC Challenge (OHC-1) Sergey Lesnik 1, Gregor Olenik 2, Mark Wasserman 3 Abstract The first OpenFOAM HPC Challenge (OHC-1) was organised by the OpenFOAM HPC Technical Committee (HPCTC) to collect a snapshot of OpenFOAM ® ’s computational performance on contemporary production hardware and assess the impact of software optimisations on computational efficiency. Participants ran a common incompressible steady-state RANS case, the open-closed cooling DrivAer (occDrivAer) configuration, on prescribed meshes, submitting either with the reference setup (hardware track) or with modified solvers, decomposition strategies, or accelerator offloading (software track). In total, 237 valid data points were submitted by 12 contributors: 175 in the hardware track and 62 in the software track. The hardware track covered 25 distinct CPU models across AMD, Intel, and ARM families, with runs spanning from single-node configurations up to 256 nodes (32 768 CPU cores). Wall-clock times ranged from 7.8 minutes to 65.7 hours and reported energy-to-solution from 2.1 to 236.9 kWh. Analysis of the hardware track identified a Pareto front of optimal balance between time- and energy-to-solution, and revealed that on-package high-bandwidth memory (HBM) dominates single-node performance for next-generation CPUs. Software-track submissions achieved up to 28% lower energy per iteration, 17% higher performance per node, and 72% shorter time per iteration than the best hardware-track results, with full GPU ports and selective-memory optimisations leading the performance range. This manuscript describes the challenge organisation, the case setup and metrics, and presents the main findings from both tracks together with an outlook for future challenges. \OpenFOAMversions OpenFOAM ® v2412 \Repository https://github.com/OpenFOAM-HPC-Challenge/OHC1 \DOI TBD \dedicatory 1 Introduction OpenFOAM is extensively utilised in both academia and industry for research and design, with many applications requiring large computational resources. It is therefore common to find OpenFOAM among the principal consumers of compute capacity on High Performance Computing (HPC) clusters. To support future improvements in resource efficiency, the first OpenFOAM HPC Challenge (OHC-1) was launched by the OpenFOAM HPC Technical Committee (HPCTC). In this context, challenge problems are a commonly used tool to test hardware performance or to compare algorithmic approaches and implementations. Well-known examples include the High Performance Linpack (HPL) from the HPCC suite [ 7 ] , which underpins the TOP500 list, and domain-specific challenges in areas such as automotive CFD [ 2 , 3 , 4 ] . The term “challenge” is used here to encourage community contributions aimed at improving computational efficiency rather than only reporting baseline performance. The goal of OHC-1 was to gather a snapshot of OpenFOAM ® ’s performance on current production hardware and to enable comparison of hardware configurations with software optimisations. Furthermore, the initiative aimed to: • collect data for evaluating future algorithmic and implementation choices in OpenFOAM ® ; • assess efficiency and scalability across hardware platforms; • compare performance of recent OpenFOAM ® variants and software optimisations; • propose unified metrics to guide development on next-generation systems; • promote a more relevant community benchmark case than the commonly used Lid-Driven Cavity 3D case 1 1 1 https://develop.openfoam.com/committees/hpc/-/tree/develop/incompressible/icoFoam . The results of OHC-1 were presented as a mini-symposium at the 20 th OpenFOAM Workshop in Vienna on July 1, 2025. The challenge attracted submission of 237 data points contributed by 12 organisations from academia and industry. The combined reported energy consumption of all submissions was approximately 4715 kWh. The manuscript is structured as follows. Section 2 presents the case setup and mesh options. Section 3 describes the organisation of the HPC Challenge, the metrics, and the validation criteria. Section 4 summarises the submitted data points and Sections 4.1 and 4.2 present the main findings of the hardware and software tracks. Section 5 concludes with a summary and outlook for future challenges. Appendix B describes the public data repository where all submissions and analysis tools are available. 2 Case Setup The HPCTC selected a single test case that had to be representative of typical industrial usage, computationally demanding, and suitable as a surrogate for common simulation workloads without relying on features that would exclude alternative implementations. Based on these criteria, the case with the external aerodynamic flow over a static DrivAer automotive model has been chosen. It had already been studied in a similar form as case 2 in the AutoCFD2 workshop [ 2 ] and as case 2a in the AutoCFD3 and AutoCFD4 workshops [ 3 , 4 ] , so reference results were available to validate submissions. The challenge case is the open-closed cooling DrivAer (occDrivAer) configuration: external aerodynamic flow around a full car with closed cooling inlets and static wheels. The geometry is based on the notchback variant of the Ford Open Cooling DrivAer (OCDA), with a complex underbody and engine bay cooling channels. For OHC-1 it was configured as a steady-state, incompressible RANS simulation using the SIMPLE algorithm with fixed inner iterations. Several meshes were pre-generated using snappyHexMesh with three resolutions: 65, 110 and 236 million cells, which were denoted as 65M, 110M and 236M, respectively. The case is available in the HPCTC repository 2 2 2 https://develop.openfoam.com/committees/hpc/-/tree/develop/incompressible/simpleFoam/occDrivAerStaticMesh . The k – \omega SST turbulence model was employed with pre-defined differencing schemes ( fvSchemes ). Key case parameters are given in Table 1 . The Reynolds number based on wheelbase L_{\text{ref}} and inlet velocity is approximately 7.2\times 10^{6} . Table 1 : Case properties for the occDrivAer challenge case. Kinematic viscosity (Air) \nu 1.507\cdot 10^{-5} \mathrm{m}^{2}/\mathrm{s} Inlet velocity U 38.889 \mathrm{m}/\mathrm{s} Wheelbase L_{\text{ref}} 2.78618 m Reynolds number Re 7.1899\cdot 10^{6} – Figure 1 shows the geometry and representative mesh views: the full occDrivAer configuration, a mid-plane section, and an underbody cut. (a) occDrivAer geometry. (b) Mid-plane mesh. (c) Underbody mesh (cut at axle). Figure 1 : Challenge case geometry and mesh. 3 Challenge Structure and Procedure After defining the computational scope of the challenges, the procedure was structured as illustrated in fig. 2 . Data submissions were categorised into two tracks: Hardware track. Participants used the provided case setup and the official OpenFOAM ® v2412 release. Only the hardware, number of nodes and cores, and system software stack could vary. Software track. Any OpenFOAM ® version and custom solvers or modifications were allowed, provided the mesh and physical model remained unchanged and solution The proposed topics for investigation in the software track included accelerators, pre-/post-processing (I/O), mixed-precision arithmetic, linear solvers, and renumbering/decomposition strategies. Submissions were accepted after the validation of computational results described in section 3.2 . The submitted results were then analysed by the organising committee based on a set of predefined metrics. A comprehensive analysis of the hardware track and software track results was subsequently presented by the organisers in the form of a mini-symposium at the 20 th OpenFOAM ® Workshop. In addition, participants delivered in-depth presentations discussing their individual contributions and investigations. Figure 2 : Overview of the OHC-1 procedure. 3.1 Metrics The following metrics were used to evaluate and compare the submissions in both tracks. Time-to-solution (TTS) The wall-clock time from the start of the main solver to completion of the prescribed number of iterations, excluding pre-processing and initialisation. Energy-to-solution (ETS) The total energy consumed during the solver run. Where direct power measurements were not available, energy was estimated from the Thermal Design Power (TDP) of the CPUs/GPUs. Pre-processing wall-clock