Chemical tuning of electronic and transport properties of the Bi-Se-Te family of topological insulators
Maxwell Doyle 1 , Benjamin Schrunk 1,2 , D. L. Schlagel 2 , Thomas A. Lagrasso 2 , Adam Kaminski 1,2 · 2026
Read Chemical tuning of electronic and transport properties of the Bi-Se-Te family of topological insulators by Maxwell Doyle 1 , Benjamin Schrunk 1,2 , D. L. Schlagel 2 , Thomas A. Lagrasso 2 , Adam Kaminski 1,2 (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-26918.txt.
Introduction
Doyle and co-authors use laser ARPES to track tuning in bismuth selenide-telluride topological insulators. Swapping selenium for tellurium changes the crystals' structure step by step. More tellurium lowers the chemical potential and the Dirac point binding energy. It also thins the density of states from the bulk band. Transport then shifts from metallic toward a semiconducting trend as temperature varies. At the highest tellurium content, resistivity nearly flattens when cold. That plateau signals conduction led by topological surface states.
Catalog record
| CREATOR | Maxwell Doyle 1 , Benjamin Schrunk 1,2 , D. L. Schlagel 2 , Thomas A. Lagrasso 2 , Adam Kaminski 1,2 |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 15507 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2603.26918
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Chemical tuning of electronic and transport properties of the Bi-Se-Te family of topological insulators Maxwell Doyle 1 , Benjamin Schrunk 1,2 , D. L. Schlagel 2 , Thomas A. Lagrasso 2 , Adam Kaminski 1,2 Abstract We use laser-based Angle-Resolved Photoemission Spectroscopy (ARPES) to study how chemical substitution modifies the electronic properties of the Bi 2 (Se 1-x Te x ) 3 (BiSeTe) family of topological insulators. We find that increasing the Te content lowers the chemical potential, leading to a decrease in the binding energy of the Dirac point and a reduction in the density of states originating from the bulk band. This reduction leads to a transition from metallic to semiconducting temperature dependence of the resistivity. For the highest Te concentration, the resistivity nearly saturates at the lowest temperatures. The presence of this plateau indicates that metallic topological surface states dominate the conductance, opening the possibility of studying their transport properties. I Introduction Topological insulators are a class of materials characterized by a bulk insulating gap and the emergence of metallic states at the surface, driven by the nontrivial topology of their electronic bands. These systems are classified as quantum spin Hall states and do not break time-reversal symmetry. 12 ; 4 The nontrivial spin structure found in the surface states of topological insulators is expected to be helpful in advancing spintronics. 15 ; 17 Topological insulators such as \text{Bi}{\vphantom{\text{X}}}_{\smash[t]{\text{2}}}\text{Te}{\vphantom{\text{X}}}_{\smash[t]{\text{3}}} , \text{Bi}{\vphantom{\text{X}}}_{\smash[t]{\text{2}}}\text{Se}{\vphantom{\text{X}}}_{\smash[t]{\text{3}}} , and \text{Sb}{\vphantom{\text{X}}}_{\smash[t]{\text{2}}}\text{Te}{\vphantom{\text{X}}}_{\smash[t]{\text{3}}} have been predicted and subsequently studied using ARPES. 18 ; 10 ; 11 These studies revealed many interesting aspects of topological insulators, such as spin-polarized bands and spin-textured Fermi surfaces. Most of these stoichiometric materials share the same weakness: the presence of a bulk band close to or crossing the chemical potential. These states dominate the transport properties, making it difficult to study the properties of the surface states. This problem can potentially be addressed by expanding the search to intermediate materials, such as the non-stoichiometric BiSeTe system 8 ; 9 , where the chemical potential can be tuned by adjusting the composition of the samples. This process introduces impurity scattering; however, the surface states are intrinsically resistant to non-magnetic scattering. Unlike trivial materials, where each state is doubly occupied by electrons with opposing spins, surface states in topological insulators exhibit single spin occupancy, and electrons at opposite momentum values ( k and -k ) have opposite spins. 13 ; 1 This suppresses scattering by non-magnetic impurities, as electrons cannot scatter into a state with opposite momentum without a spin-flip process. 14 An example of such resilience is a study demonstrating that the surface states of topological insulators survive brief exposure of the sample surface to air. 3 ; 5 At the same time, prolonged exposure to low-pressure hydrogen has been shown to substantially change electron filling and shift the chemical potential. 5 By introducing magnetic elements to break time-reversal symmetry 2 , these materials exhibit the quantum anomalous Hall effect and provide a versatile platform for the study of Majorana fermions. 6 ; 7 Understanding how topological insulators behave in ambient environments is crucial for their implementation in quantum computing architectures. Here, we present results demonstrating how chemical substitution can be used to tune the band structure and enhance the contribution of topological effects to the resistivity in these materials. II Experimental Details Single crystals were grown using appropriate ratios of high-purity bismuth (99.999%), selenium (99.999%), and tellurium (99.999%). The elements were sealed in a quartz tube with a pointed tip and melted into an ingot in an induction furnace to homogenize the composition. The ingot was then sealed in a larger-diameter quartz tube and loaded into a Bridgman furnace. Crystals were grown by withdrawing the quartz tube at a rate of 1 mm/hr after heating to 800^{\circ} C. ARPES measurements were performed using a laboratory-based system with a vacuum ultraviolet (VUV) laser ARPES spectrometer consisting of a Scienta DA30 electron analyzer and a tunable picosecond Ti:sapphire oscillator coupled to a fourth-harmonic generator. The measurements were carried out using a photon wavelength of 745 nm and an energy of 6.6 eV. The angular resolution was 0.2° and 0.1° perpendicular and parallel to the analyzer slit, respectively. The energy resolution was set to 1 meV. The samples were mounted on copper pucks and cleaved in situ at 40 K under a pressure of 4\times 10^{-11} Torr, producing flat, specular surfaces. The concentration levels of each element were determined by energy-dispersive X-ray spectroscopy (EDS) using a Thermo NORAN Microanalysis System (model C10001) attached to a JEOL scanning electron microscope (SEM). An acceleration voltage of 21 kV, a working distance of 10 mm, and a take-off angle of 35° were used to measure all crystals with unknown composition. These concentrations were used in Figure 2 when plotting quantities as a function of composition. The composition data were also used to verify the stoichiometry of the BiSeTe samples. III Results and Discussion The ARPES data of the Fermi surfaces and band dispersions of Bi 2 (Se {1-x} Te x ) 3 samples for three different Te concentrations are shown in Figure 1. Panels (a–c) show that the shape of the Fermi surface evolves from hexagonal to more rounded with increasing Te concentration. The band dispersion along the \Gamma cut is shown in panels (d–f). Panel (d) is particularly interesting because the projection of the bulk conduction band is visible below the chemical potential. 5 We observe that the binding energy of the Dirac point decreases due to the lowering of E_{F} , which is caused by a decrease in the number of electrons per lattice site with increasing Te substitution. The reduced intensity in the lower-left quadrant, most prominent in panel (a), is due to ARPES matrix elements. Figure 1: Fermi surface (a-c) and band dispersion (d-f) of BiSeTe for few Te concentrations as indicated above panels. An arrow in panel (d) points to intensity from the bulk band for the lowest Te concentration. In Figure 2, we plot the energy distribution curves (EDCs) and the Dirac point energy as a function of chemical composition. The peaks indicate the energy positions of the Dirac points and allow us to determine their exact locations and their dependence on substitution, as discussed above. The additional peak near the chemical potential, seen in panel (a) in the green EDC, is due to the presence of a conduction band, as explained above. In panel (b), we quantify the dependence of the Dirac point binding energy on chemical composition by plotting the peak energies from panel (a) as a function of Te concentration. We note that this dependence is approximately linear. The changes in the size of the Fermi surface are shown in panel (c) as a function of tellurium content. We observe a decrease in \Delta k with increasing Te concentration, which is consistent with the data shown in panel (b). Figure 2: (a) Energy distribution curves showing the decrease of binding energy of Dirac point with increasing Te concentration. (b) Energy of the Dirac point as a function of Te content extracted by fitting peak positions in (a). (c) Fermi caliper size extracted from Fig. 1. Table 1: EDS measurements of chemical composition of BiSeTe samples. Low Te Med