Interplay of network architecture and ionic environment in dictating pNIPAM microgel thermoresponsiveness Preprint: APS/123-QED
Syamjith KS, Alan Ranjit Jacob · 2026
Read Interplay of network architecture and ionic environment in dictating pNIPAM microgel thermoresponsiveness Preprint: APS/123-QED by Syamjith KS, Alan Ranjit Jacob (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-26714.txt.
Introduction
KS and Jacob map how network design and salt levels jointly shape the heat response of pNIPAM microgels. These gels swell and shrink with temperature, and their use in body-like or outdoor settings depends on staying stable in saline fluid. The team tests eight architectures, from ultra-low crosslinked to core-corona and evenly crosslinked forms. Salt runs from 0 to 100 millimolar across 22 batches, tracked by light scattering. They chart transition temperature shifts, salt tolerance limits, hysteresis, and clumping at extreme salinity.
Catalog record
| CREATOR | Syamjith KS, Alan Ranjit Jacob |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 76632 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2603.26714
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Interplay of network architecture and ionic environment in dictating pNIPAM microgel thermoresponsiveness Preprint: APS/123-QED Syamjith KS, Alan Ranjit Jacob Abstract The utility of non-functionalized poly(N-isopropylacrylamide) (pNIPAM) microgels in physiological and environmental applications is strictly dependent on their reversible thermoresponsiveness and stability in saline media. Despite their importance, a unified understanding of how network topology, specifically crosslinker concentration and distribution regulates ionic sensitivity remains fragmented in the literature. This work systematically investigates the interplay between network topology and ionic strength (0–100 m M mM N a C l NaCl ) across eight distinct microgel architectures, ranging from ultra-low crosslinked (ULC) to core-corona and homogeneously crosslinked (HC) variants. Utilizing dynamic light scattering across 22 batches, we analyzed critical thermoresponsive properties, including volume phase transition temperature (VPTT) shifts, salt tolerance thresholds, hysteresis indices, and flocculation kinetics (only at extreme salinity, 1000 m M mM N a C l NaCl and at 25 ∘ C {}^{\circ}C ). This comprehensive investigation enables a multi-dimensional analysis of how ionic strength, the presence or absence of crosslinkers (MBA), spatial crosslinking distribution, and thermodynamic states dictate microgel behavior across varying temperatures. Finally, we evaluate the applicability of this experimental library to established theoretical frameworks, specifically the Flory-Rehner and Flory-Rehner-Donnan models, addressing ongoing debates regarding their validity in describing complex microgel systems. Keywords: pNIPAM microgels, network topology, ionic sensitivity, Flory-Rehner-Donnan theory. I Introduction Microgels are soft, crosslinked polymer colloidal particles with a size range from 100 nm to 10 \mu m . They are well known for their unique ability to swell up and collapse back in good solvent 89 ; 21 ; 46 ; 97 ; 53 ; 69 . Poly(N-isopropylacrylamide), or pNIPAM, is a classic example of a thermoresponsive polymer that is characterized by a lower critical solution temperature (LCST) 104 ; 10 . While pNIPAM polymer is crosslinked into a microgel particle, it retains the thermoresponsive behavior, showing a characteristic volume phase transition temperature (VPTT) 65 ; 19 ; 68 ; 78 ; 9 ; 56 ; 108 ; 104 ; 5 ; 92 ; 66 , where its properties change significantly. Since its first synthesis by Pelton and Chibante in 1986 76 , these systems have been widely studied due to their reversible thermoresponsiveness. In this study, we focus specifically on non-functionalized pNIPAM microgels—defined here as architectures synthesized without the incorporation of ionic comonomers—to isolate the role of network topology on their fundamental behavior. I.1 pNIPAM microgel network architecture and composition effects on properties Crosslinking density is a crucial parameter that influences the microstructure and thermoresponsive properties of pNIPAM microgels. There is a plethora of data available in the literature regarding the relationship between crosslinking density and the size, charge, and mechanical properties of microgels with respect to temperature 45 ; 73 ; 85 ; 40 . In our recent work 46 , building on this literature, we synthesized microgels by systematically varying the concentration of crosslinker (N, N’-methylenebisacrylamide, MBA, or BIS) during synthesis to create microgels with different crosslinking densities. The results show that increasing the MBA concentration decreases the hydrodynamic diameter in the swollen state and elevates both the VPTT and electrokinetic transition temperature (ETT). These microgels exhibited reversible thermoresponsive behavior with minimal hysteresis irrespective of the crosslinking density. Microgels can be synthesized in the absence of crosslinkers, and these are referred to as the ultra-low crosslinked (ULC) microgels 90 ; 3 . Earlier studies by Jun et al. 26 ; 27 established that ULC microgels formed through self-crosslinking chain transfer reactions 34 during free radical polymerization, exhibits volume phase transition (VPT) near 32–33 {}^{\circ}C . Otto et al. 100 reported an inverted polymer density profile in ULC microgels, where crosslinking dominates near the surface of the particle rather than the core. However, Dimitri et al. 103 utilized the AFM nanoindentation mapping method to show that self-crosslinked microgels display a more homogeneous elastic profile compared to microgels synthesized with the crosslinker (which exhibit a core-corona structure). In addition to the crosslinking density, the distribution of crosslinking throughout the microgel also impacts its properties. These conventional microgels have a dense, highly crosslinked core and loose corona due to faster reaction kinetics for crosslinking (MBA) than polymerization (NIPAM) 46 . In contrast, Homogeneous Crosslinked (HC) microgels have a uniform crosslinking distribution throughout the particle. The semi-batch surfactant-free emulsion polymerization method 94 ; 47 ,in which the crosslinker is fed at regular intervals during the reaction, is expected to reduce heterogeneity in the crosslinking distribution within a microgel. Saisavadas et al. 86 with the help of large-amplitude oscillatory shear rheology, showed that dense HC microgels yield like glasses in a single step, unlike core-corona microgels, which yield in two steps due to entangled chains in the loose corona. Together, these studies underscore that the crosslinking density and its distribution influence microgel’s properties. I.2 pNIPAM microgel behavior in salt environments Beyond temperature, the chemical environment—specifically the ionic strength—plays an important role in the microgel thermodynamics. It can be analyzed through two distinct aspects, the Debye-Hückel electrostatic screening 15 ; 79 ; 107 ; 48 ; 106 ; 44 ; 41 ; 93 ; 91 and the salting-out effect 18 ; 25 ; 59 ; 38 ; 43 ; 70 ; 4 ; 95 ; 17 ; 48 ; 42 ; 11 ; 63 ; 91 . These two mechanisms lead to a decrease in the stability of the microgel suspension, which initiates flocculation 37 ; 14 ; 61 ; 14 ; 83 ; 82 ; 51 ; 35 ; 1 ; 52 ; 77 ; 84 . Daly and Saunders 14 reported that anions with high charge density (citrate 3- ) lead to dehydration and then flocculation. They reported the critical flocculation temperature (CFT), the temperature above which irreversible particle aggregation begins, often coincides with the LCST and shifts systematically with salt concentration and type of salts. The critical flocculation concentration (CFC), defined as the minimum salt concentration required to trigger flocculation, it follows the Schulze-Hardy rule, with higher-valence cations exhibiting greater screening efficiency 111 thereby inducing flocculation at lower concentrations. As reported in the literature 56 ; 58 ; 77 , kosmotropic anions like Cl - and F - in the Hofmeister series trigger more pronounced deswelling as compared to chaotropic anions like SCN - 74 ; 57 , and reducing the transition temperature of pNIPAM microgels by disrupting its hydration layer. With the help of classical molecular dynamics simulations 16 and using high-resolution nuclear magnetic resonance (NMR) spectroscopy 75 , it has been reported that cations (Na + , K + , Ca + , Mg 2+ ) interact directly with the neutral pNIPAM polymer through ion-dipole interactions with carbonyl oxygen atoms, and depressing the LCST. The depression in the transition temperature is by altering both enthalpic and entropic contributions to the phase transition, with the magnitude of depression reflecting the ion’s position in the Hofmeister series 28 ; 24 ; 80 ; 78 ; 60 . It is important to note that, while NaCl is positioned in the middle of the Hofmeister series, even NaCl and other intermediate salts can significantly affect thermoresponsive polymer behavior 110 . I.3 Thermoreversibility and hysteresis Thermoreversibility and hysteresis are critical