Patched-Wall Quasistatic Cavity Resonators for 3-D Wireless Power Transfer

Takuya Sasatani, Yoshihiro Kawahara · 2026

Read Patched-Wall Quasistatic Cavity Resonators for 3-D Wireless Power Transfer by Takuya Sasatani, Yoshihiro Kawahara (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-26636.txt.

Introduction

Sasatani and Kawahara design a room-scale wireless power system with no obstacles inside the charging space. Multimode cavity resonance can fill a whole volume, but past designs needed a central pole. Their patched-wall resonator links conductive wall segments with capacitors instead. Two resonant modes together cover both the room's edges and its centre. Simulations over a 54 cubic metre enclosure show at least 48.1% transfer efficiency everywhere inside. The open volume keeps the space usable while devices charge.

Catalog record

CREATORTakuya Sasatani, Yoshihiro Kawahara
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE18852
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2603.26636

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Patched-Wall Quasistatic Cavity Resonators for 3-D Wireless Power Transfer Takuya Sasatani, Yoshihiro Kawahara Abstract Traditional wireless power transfer (WPT) systems are largely limited to 1-D charging pads or 2-D charging surfaces and therefore do not support a truly ubiquitous device-powering experience. Although room-scale WPT based on multimode quasistatic cavity resonance (QSCR) has demonstrated full-volume coverage by leveraging multiple resonant modes, existing high-coverage implementations require obstructive internal conductive structures, such as a central pole. This letter presents a new structure, termed the patched-wall QSCR, that eliminates such internal obstructions while preserving full-volume coverage. By using conductive wall segments interconnected by capacitors, the proposed structure supports two complementary resonant modes that cover both the peripheral and central regions without obstructions within the charging volume. Electromagnetic simulations show that, by selectively exciting these two resonant modes, the proposed structure achieves a minimum power-transfer efficiency of 48.1% across the evaluated 54 m 3 charging volume while preserving an unobstructed interior space. I Introduction Wireless power transfer (WPT) is increasingly used for mobile-device charging, yet achieving wide spatial coverage, high delivered power, and high efficiency simultaneously remains challenging. Microwave approaches can provide long transfer distances, but they typically suffer from limited delivered power and low efficiency [ 3 ] . Conventional cavity-resonator-based approaches can provide three-dimensional coverage, but they rely on exposed electric fields within the resonant volume, resulting in strong interactions with dielectric objects [ 1 , 16 ] . Magnetoquasistatic approaches enable high-power, high-efficiency power transfer, but they are largely restricted to 1-D charging cradles or 2-D charging surfaces because of their limited range [ 6 , 4 , 15 , 10 ] . Recent work on quasistatic cavity resonance (QSCR) has demonstrated a route toward 3-D, wide-range WPT in the magnetoquasistatic regime by leveraging surface currents on a conductive enclosure [ 2 , 12 , 9 ] . These systems use conductive sheets, lumped capacitors, and additional conductive structures to allow magnetic fields to permeate the cavity interior while confining electric fields to the lumped capacitors, thereby enabling high-efficiency, high-power transfer over large volumes. Furthermore, subsequent work on multimode QSCR showed that multiple resonant modes can be used to provide full-volume coverage [ 11 , 13 , 8 ] . However, existing high-coverage implementations require conductive structures within the room interior, which obstruct normal use of the space. Fig. 1: Simulated surface-current distributions and magnetic-field patterns of the proposed patched-wall quasistatic cavity resonator for the two supported modes: (a) current distribution of the pole-independent (PI) mode, (b) current distribution of the surface-Helmholtz (SH) mode, (c) magnetic-field magnitude for the PI mode, and (d) magnetic-field magnitude for the SH mode. The PI mode concentrates magnetic flux near the periphery of the cavity, whereas the SH mode produces a strong central field without requiring an internal conductive pole. Fig. 2: Geometry and tunability of the proposed patched-wall resonator. (a) Resonator structure, dimensions, and qualitative current-loop paths associated with the SH and PI modes. (b) Resonant frequency versus capacitance for the two supported modes. (c) Resonant frequency versus geometric parameters p_{\mathrm{ctr}} and p_{\mathrm{cor}} . (d) Simulated quality factor versus p_{\mathrm{ctr}} and p_{\mathrm{cor}} for the SH and PI modes. These results show that the operating frequencies can be tuned through both lumped capacitance and structural geometry while maintaining high quality factors. This letter proposes a patched-wall QSCR, a resonator structure that achieves full-volume coverage by preserving the pole-independent (PI) mode while replacing the pole-dependent (PD) mode with a new wall-based resonance, termed the surface-Helmholtz (SH) mode (Fig. 1 ) 1 1 1 Code and data are available on GitHub ( github.com/SasataniLab/PW-QSCR ) and archived on Zenodo [ 14 ] . . Prior multimode QSCR designs relied on a PI mode to cover regions near the walls and a PD mode to cover the central region of the volume. Because the PI mode is largely unaffected by the central pole, it is preserved in the proposed structure. In contrast, the PD mode requires a physical central pole to guide current and shape the magnetic field in the center of the volume. To replace this mode, we introduce the SH mode, synthesized using segmented cavity walls interconnected by capacitors to shape current flow along the ceiling and floor. This mode generates a central magnetic field using the floor and ceiling as a pair of current loops, thereby eliminating the need for internal conductive structures. As a result, wide-area high-efficiency power delivery can be achieved while maintaining a completely unobstructed charging space. Using finite-element simulations, we evaluate the performance of the proposed system over the 54 m 3 charging volume and show that selective excitation of the two modes substantially suppresses low-efficiency regions, thereby enabling unobstructed wide-area 3-D wireless power coverage. II Resonator Design and Mode Structure The proposed patched-wall resonator consists of exterior surfaces partitioned into conductive sheet “patches” interconnected by capacitors and strategically placed apertures (Fig. 2 a). Specifically, apertures are located at each corner of the room and at the centers of the ceiling and floor. The remaining metal enclosure is divided into four units coupled through lumped-element capacitors. In this work, the concept is implemented in simulation as a 4.9\times 4.9\times 2.3 m 3 enclosure. In contrast to single-mode QSCR and prior multimode QSCR designs, in which a continuous conductive wall serves as the return path for current flowing through a central pole, the proposed architecture supports current paths that loop within the walls, floor, and ceiling. The capacitors serve two primary functions: they tune the structure to a resonant frequency in the magnetoquasistatic regime and determine the distribution of surface currents and the resulting magnetic field. The system supports two complementary resonant modes that together provide coverage throughout the interior volume. Prior work achieved full-volume coverage using a pole-independent (PI) mode for peripheral regions and a pole-dependent (PD) mode for the center [ 11 , 13 ] . The proposed patched-wall QSCR follows the same principle while eliminating the need for a physical conductive pole. The PI mode remains consistent with prior multimode QSCR implementations, whereas the surface-Helmholtz (SH) mode primarily uses surface currents on the ceiling and floor to synthesize a field distribution analogous to that of a Helmholtz coil (Fig. 1 ) [ 5 ] . This configuration consists of vertically separated current loops that produce a relatively uniform magnetic field in the central region. II-A Pole-Independent (PI) Mode The PI mode is excited by inducing currents that flow primarily along the vertical wall segments. As demonstrated in previous work, this mode produces magnetic-field patterns concentrated near the room boundaries and corners, thereby providing coverage in regions where center-focused modes typically exhibit nulls [ 11 , 13 ] . In the patched-wall architecture, this mode is realized by exciting the vertical gaps between adjacent wall patches. Because this mode does not rely on a central current path, its field distribution is largely unaffected by the additional apertures at the centers of the ceiling and floor. II-B Surface-Helmholtz (SH) Mode The SH mode is designed to provide strong magnetic-field intensity in the center of the enclosure, serving as a pole-free replacement for the traditional PD mode. In prior multimode QSCR designs, the PD mode relies on current flowing vertically through a central pole

Read the complete text