Mean-field theory of the Stribeck effect Preprint: APS/123-QED
Vincent Bertin, Olivier Pouliquen · 2026
Read Mean-field theory of the Stribeck effect Preprint: APS/123-QED by Vincent Bertin, Olivier Pouliquen (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-26563.txt.
Introduction
Bertin and Pouliquen model the shift from contact to fluid lubrication on rough surfaces. They build on the mean-field frame of Persson and Scaraggi for rough elastic contacts in a Newtonian fluid. A minimal model couples contact mechanics with lubrication through a split pressure field. Three dimensionless numbers govern the friction: speed, load, and roughness. In the boundary and full-film limits, contact shape tends toward the Hertz form. For mixed lubrication they derive friction forms at low and high speeds.
Catalog record
| CREATOR | Vincent Bertin, Olivier Pouliquen |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 80404 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2603.26563
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Mean-field theory of the Stribeck effect Preprint: APS/123-QED Vincent Bertin, Olivier Pouliquen Abstract Abstract: We present a theoretical analysis of frictional transitions along the Stribeck curve for rough elastic contacts lubricated by a Newtonian fluid. Building on the mean-field framework of Persson and Scaraggi (J. Phys.: Condens. Matter 21 (2009) 185002), we formulate a minimal elastohydrodynamic model that couples contact mechanics and lubrication through a homogenized pressure decomposition. Dimensional analysis reveals three independent dimensionless parameters governing the frictional response, which correspond to a dimensionless speed, normal load, and surface roughness. Using asymptotic expansions, we first characterize the boundary and hydrodynamic lubrication regimes, which arise naturally as the quasistatic and smooth-surface limits of the model. In both limits, the contact morphology converges toward Hertzian contact in the regime of large elastic deformation, with boundary layers regularizing the separation profile at the edge of the contact zone. We then analyze the mixed lubrication regime and derive asymptotic expressions for the friction coefficient in the low- and high-speed limits. At high speeds, friction decomposes into a viscous contribution and a residual contact term, leading to a roughness- and load-dependent criterion for the transition to hydrodynamic lubrication that departs from constant- Λ \Lambda ratio theories. At low speeds, friction reduction results from the progressive redistribution of the applied load between asperity contact and hydrodynamic pressure, yielding a characteristic transition speed from boundary to mixed lubrication. These results are summarized in a phase diagram that generalizes the classical Stribeck curve to a multidimensional parameter space. I Introduction Lubrication is one of the most common and effective strategy for reducing sliding friction and wear between solid surfaces Persson 2013 . It plays a central role across a wide spectrum of applications: from the operation of large‐scale mechanical systems such as gears, bearings, and engines, to microelectromechanical devices Bhushan 2001 , biomedical implants Moghadasi et al. 2022 , and even natural systems such as synovial joints Jahn et al. 2016 . A central challenge across these systems is to ensure robust lubrication so that the surfaces remain separated and direct contact is avoided. The Stribeck curve, illustrated in Fig. 1 , provides a qualitative framework for characterizing the frictional response under lubrication. It represents the coefficient of friction \mu , ratio of tangential to normal forces, as a function of the Hersey number, defined as the product of viscosity and sliding velocity divided by the applied normal load per unit length. Three regimes are typically distinguished: (i) boundary lubrication, occurring at high loads and low speeds, where the lubricant is largely expelled and friction and wear are governed by direct solid–solid contact; (ii) hydrodynamic or elastohydrodynamic lubrication (EHL), at high speeds and low loads, where a liquid film is entrained and supports the load, with friction is dominated by viscous shear; and (iii) an intermediate mixed lubrication regime, where both asperity contact and hydrodynamic pressure contribute significantly, and the friction coefficient decreases with speed. Although the existence of these three regimes is well established, the mechanisms governing the transitions between them remain poorly understood. Figure 1: Stribeck curve schematic. Friction coefficient, ratio between shear force F over the normal force per unit length F_{N} , versus the Hersey Number \eta U/F_{N} , where \eta and U are the lubricant viscosity and sliding speed respectively. Three regimes of boundary, mixed and hydrodynamic lubrication are encountered as the Hersey number increases. The boundary-to-mixed transition has received little attention in the literature. Classical contact mechanics models, such as the Greenwood–Williamson asperity model Greenwood and Williamson 1966 , and more advanced statistical theories of roughness such as Persson’s model Persson 2001 , provide detailed descriptions of the stochastic mechanics of asperity contact. Both frameworks predict that the real area of contact increases linearly with the applied normal load, thereby providing a microscopic basis for Coulomb’s friction law. However, these approaches neglect the role of fluid flow, and thus cannot capture the coupled interplay between solid contact and hydrodynamic pressure that governs the onset of mixed lubrication. The aim of this article is to fill this gap. It is worth mentioning that the frictional response of soft materials such as rubbers or gels often departs from Coulomb’s law, being governed instead by additional physico-chemical processes Gong 2006 , such as chain adsorption Schallamach 1963 ; Persson and Xu 2025 , viscoelastic losses Grosch 1963 ; Persson 2001 , or poroelastic dissipation Delavoipière et al. 2018 ; Cuccia et al. 2020 . In this article, we leave those effects aside and will restrict ourselves to elastic interfaces. The mixed-to-hydrodynamic transition has traditionally been analyzed through extensions of elastohydrodynamic lubrication (EHL) theory. Classical EHL provides a description of pressure generation and hydrodynamic friction between nominally smooth, conforming surfaces, and thus applies directly in the hydrodynamic regime, where roughness \ll film thickness Venner and Lubrecht 2000 ; Lugt and Morales-Espejel 2011 ; Greenwood 2020 . However, it cannot easily accommodate the stochastic nature of real topographies. A central difficulty is the multiscale character of rough surfaces, which typically display correlated roughness spanning several orders of magnitude in length scale Jacobs et al. 2017 ; Ardah et al. 2025 . A major advance was the homogenization framework of Patir and Cheng Patir and Cheng 1978 ; Patir and Cheng 1979 ; Tripp 1983 , which introduced so-called flow factors to account for the averaged influence of surface roughness on the Reynolds equation. These models predict that roughness significantly alters the pressure distribution once the mean film thickness becomes comparable to a few times the root-mean-square (rms) roughness, h_{\mathrm{rms}} . This observation motivated the introduction of the dimensionless \Lambda ratio, defined as the ratio of central film thickness to h_{\mathrm{rms}} . It is often argued that the mixed-to-hydrodynamic transition is controlled by this thickness ratio \Lambda=3 Spikes 1997 . Nevertheless, experimental studies report a much broader range of transition values, from \Lambda\simeq 0.7–11 Bongaerts et al. 2007 , \Lambda\simeq 0.7–1.2 Petrova et al. 2019 , \Lambda\simeq 0.9–2.3 Sadowski and Stupkiewicz 2019 , and \Lambda\simeq 16–2,736 Dong et al. 2023 . This wide scatter suggests that models coupling contact mechanics and EHL alone can fully describe the transition, and that multiple pathways exist. Indeed, in many real situations the transition is initiated or strongly influenced by physico-chemical mechanisms, such as long-range adhesive forces leading to “jump-to-contact” Dong et al. 2025 , mechanical surface instabilities including wrinkling or Schallamach waves Dong et al. 2023 ; Wu-Bavouzet et al. 2007 , or viscoelastic stresses in lubricant film Oratis et al. 2025 . This broad scatter emphasizes that a global framework of mixed lubrication is still lacking – one that can capture the interplay of contact mechanics, fluid dynamics, and physico-chemical effects, and thereby clarify the key parameters and scaling laws governing transitions. The central difficulty in mixed-lubrication modeling is that it must simultaneously describe regions of fluid flow and regions of solid–solid contact. Classical Navier–Stokes–based models with no-slip boundary conditions, such as lubrication theory, cannot handle sliding contact: as the local film thickness tends to zero, the shear rate diverges. Within the Reynolds equation, this manifests as a singularity in the pressure field when the gap vanishes. This issue is well known in fluid dynamics and wetting, where it appears