Enabling topography-resolving structural dynamic contact simulation Journal: Elsevier
Hendrik D. Linder 1 , David A. Najera-Flores 2 , Robert J. Kuether 3 , Malte Krack 1 , · 2026
Read Enabling topography-resolving structural dynamic contact simulation Journal: Elsevier by Hendrik D. Linder 1 , David A. Najera-Flores 2 , Robert J. Kuether 3 , Malte Krack 1 , (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-26446.txt.
Introduction
Linder and co-authors extend a topography-aware contact model to fully dynamic simulation of jointed structures. Friction in connections drives much of a structure's damping, and real surface shape matters most in partial slip. Their multi-scale method couples finite element and boundary element models of the true contact surface. They show it works with time stepping and Harmonic Balance runs, checked against quasi-static results on the S4 Beam test case. The runs reveal that load history can shift the settled equilibrium.
Catalog record
| CREATOR | Hendrik D. Linder 1 , David A. Najera-Flores 2 , Robert J. Kuether 3 , Malte Krack 1 , |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 78574 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2603.26446
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Enabling topography-resolving structural dynamic contact simulation Journal: Elsevier Hendrik D. Linder 1 , David A. Najera-Flores 2 , Robert J. Kuether 3 , Malte Krack 1 , Abstract Damping of structures and systems is often dominated by frictional dissipation in connections, the prediction of which remains a longstanding scientific challenge. Previous studies have shown that the actual topography of contact interfaces may have a strong effect on the dynamics of jointed structures. The multi-scale nature of manufactured surfaces makes finite element (FE) simulations computationally challenging or even infeasible, especially for long-duration transient dynamic simulations. We recently proposed a multi-scale method to enable topography resolving simulations. In that method, the contact region is modeled using half-space theory implemented on a fine grid of boundary elements (BE), whereas the underlying bodies are described using a relatively coarse FE model. So far, this FE-BE multi-scale method has been limited to quasi-static analysis. In the present work, we extend the method dynamic analysis, in the form of time integration and Harmonic Balance. As numerical benchmark system, the well-known S4 Beam is used, for which actual topography measurements are available. The proposed method demonstrates high robustness and efficiency, permits relatively large and mesh-independent time steps, and shows no evidence of numerical damping. The simulation results are in overall very good agreement with explicit and implicit full-FE analyses. In the partial slip regime, some discrepancy is found to be of physical origin: Depending on the load history, the system settles to a slightly different equilibrium, which is associated with a distinct residual contact stress field. 1 Introduction To engineer structures and systems against undesired noise and harmful vibrations, it is crucial to quantify their damping. The amount of damping determines, in particular, if resonances can be survived, how prone a system is to dynamic instabilities, and how quickly cyclic stresses decay after a shock-type load. In the absence of specific damping devices, dry friction in mechanical connections, e. g., bolted or riveted joints, is the dominant cause of structural dissipation of most engineering systems [ 18 , 40 ] . While monolithic design may offer weight reduction in some cases, jointed design prevails as it permits to combine different materials, facilitates manufacturing and maintenance/repair, and may lead to less waste. The primary purpose of the described connections is to transmit load, provide stiffness, ensure leak tightness and/or alignment. The contact interfaces are, therefore, designed to remain in a macroscopic stick phase under reasonable vibratory loads, while microscopic relative motion is allowed. This regime is called partial slip , pre-sliding or microslip. Likewise, partial liftoff occurs, i. e., local opening-closing events, which also has a crucial effect on the structural dynamics. Over the past two decades, substantial research effort has been directed towards understanding and predicting friction damping. Still, under partial slip/liftoff conditions, the predictive capabilities of today’s state-of-the-art methods are quite limited [ 9 ] . It is known that the actual contact interface topography may have a crucial impact on the initial pressure and gap distribution upon assembly, as well as the frictional-unilateral contact interactions under dynamic loading. Real, manufactured surfaces are, of course, neither smooth nor flat, but they feature form deviations, waviness and roughness. The initial topography results from manufacturing and evolves during the system’s lifetime for a number of reasons, including wear and corrosion. In addition, misalignment affects the composite surface, i. e., the two-dimensional distance profile of the paired contact interfaces. An important working hypothesis has been established over the past decade: If the actual interface topography is accounted for, reasonably accurate predictions of the vibration behavior can be obtained. This is supported, among others, by the theoretical and experimental works [ 51 , 37 , 5 , 10 , 39 , 54 , 41 , 53 ] . Although there seems to be consensus on this hypothesis, it is still an open research question, what length scales of the topography must be accounted for. Two fundamentally different approaches to account for the topography should be distinguished, which we will refer to as topography-resolving and topography-blurring , respectively. Topography-resolving simulations rely on a geometric model of the contact interfaces. To obtain this, it is now common practice, at least in academic and component testing, to scan the interface topography, e. g., using coordinate measurement machines [ 50 ] or white-light interferometers [ 10 , 17 , 19 ] . Provided that all relevant length scales are captured in this geometric model, it seems appropriate to model frictional-unilateral interactions among the surfaces via set-valued contact laws ( Coulomb-Signorini conditions ). In contrast, topography-blurring simulations use surface geometry data to inform compliant constitutive contact laws [ 6 ] . Of course, a combination is possible, where the longer wave lengths of the topography are resolved, whereas the shorter ones are blurred. Exemplary results of a topography resolving simulation are shown in Fig. 1 together with measurement data, in terms of the amplitude-dependent damping ratio of the first in-phase bending mode of a realization of the S4 Beam benchmark, which is also considered in the present work. Figure 1 : Experimental results and simulation results of a topography resolving simulation of the S4 Beam. Dynamic topography-resolving simulation is computationally challenging or infeasible. An important reason for this is the multi-scale character of the problem: The local relative displacements within a mechanical connection may be in the (sub-)micrometer range, while the maximum (absolute) vibration level of the system may be much larger, e. g., in the order of several millimeters. Similarly, the form deviations may be in the micrometer range, while the dimensions of the nominal contact area may be in the range of centimeters, and the dimensions of the parts may be in the meter range. This leads to extremely high numbers of FE nodes. The second aspect that challenges computational feasibility is the set-valued contact laws (Coulomb-Signorini conditions). On the one hand, these idealized contact laws are beneficial, namely with regard to the aim for predictive modeling: The friction coefficient remains as the only parameter of the contact model. It is state of the art to identify this from dedicated tests, and the transfer of this parameter to different assemblies seems justified, provided that the considered material pairing and ambient conditions are equivalent. It should be emphasized that this is in complete contrast to contact models whose stiffness or hysteresis parameters are calibrated to tests, such as the popular 4-parameter-Iwan model [ 43 ] , for which it is known that such a transfer is invalid. On the other hand, the set-valued character of the force laws, in conjunction with the fine contact interface resolution is highly challenging for computations. For this type of problem (finely resolved contact interface in combination with stiff or rigid contact laws), Finite Element (FE) analysis is prone to numerical error and non-convergence, see e. g. [ 22 ] . Quasi-Static Modal Analysis (QSMA) is the prevailing method for computing amplitude-dependent modal parameters of topography resolving models. The idea of that method is as follows: First, the static equilibrium configuration is obtained accounting for the assembly process (e. g. tightening sequence of the bolts). Second, a conventional modal analysis step is done by assuming linear behavior around this