Non-bulging Fatou components for transcendental skew-products
Tom Potthink, Jasmin Raissy · 2026
Read Non-bulging Fatou components for transcendental skew-products by Tom Potthink, Jasmin Raissy (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-26202.txt.
Introduction
Potthink and Raissy study when Fatou components of skew-products bulge. Their focus is escaping or oscillating components on invariant fibers. Bulging turns out to depend on the perturbation, not just on the fiber dynamics. For any orbitally unbounded component, some perturbation choice makes it non-bulging. Well-behaved perturbations can make it bulge when the fiber attracts. This contrasts with known results for components that do not escape. The fiber and base dynamics alone do not decide the outcome.
Catalog record
| CREATOR | Tom Potthink, Jasmin Raissy |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 50753 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2603.26202
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Non-bulging Fatou components for transcendental skew-products Tom Potthink, Jasmin Raissy Abstract . In this paper, we investigate the bulging of escaping or oscillating Fatou components on invariant fibers for general skew-products, with a focus on the dependence on the perturbation. We show that any orbitally unbounded component is non-bulging for an appropriate choice of perturbation, whereas sufficiently well-behaved perturbations can render it bulging when the fiber is attracting. Our results highlight that bulging is influenced by more than just the dynamics on the fiber and in the one-dimensional coordinate, contrasting sharply with established results for non-escaping Fatou components. 2020 Mathematics Subject Classification Primary 37F80; Secondary 30D05, 32H50, 37F10 1. Introduction A central goal of complex dynamics is the study of the Fatou and Julia sets, which correspond, respectively, to the sets of stable and unstable behavior of the iterates of a holomorphic function. While the dynamics of entire functions in one complex variable is by now well understood, even simple extensions to higher dimensions, such as skew-products, exhibit fundamentally new phenomena that are not yet fully explored. In dimension one, the types of components that constitute the Fatou set of an entire function are nearly completely classified. The basic classification was first established by Fatou and later further developed and completely proven by several authors (Julia, Leau, Siegel, Herman…). Furthermore, more recently, progress has been made to better understand wandering domains (cf. [ BEF+22 ] and [ FR24 ] ). In higher dimensions, however, no similarly complete understanding of Fatou components exists. A natural way to bridge one- and two-dimensional dynamics is to consider maps with a partially decoupled structure, where one coordinate evolves independently. In this paper, we study two-dimensional Fatou components of skew-products , i.e., maps F\colon\mathbb{C}^{2}\to\mathbb{C}^{2} of the form F(z,w)=(f(z,w),g(w)). Skew-products serve as a natural stepping stone from one-dimensional to two-dimensional dynamics, since they often allow the reduction of two-dimensional behavior to one-dimensional analysis. Of particular interest is the behavior near an invariant fiber \{w=c\} , as on the fiber itself, the skew-product reduces to a one-dimensional function. In fact, the interplay between the dynamics on invariant fibers and the full two-dimensional system raises subtle questions about stability and the structure of Fatou components. This setting has been explored, for example, in [ Lil04 ] for polynomial skew-products and attracting fibers, that is, fibers \{w=c\} where c is an attracting fixed point of g (i.e., g(c)=c and |g^{\prime}(c)|<1 ). Without loss of generality, we assume throughout that c=0 and we write the skew-product F as F(z,w)=(f(z)+r(z,w),g(w)) where the holomorphic function f gives the one-dimensional action of F on the invariant fiber and r\colon\mathbb{C}^{2}\to\mathbb{C} is a holomorphic map such that r(z,0)=0 . We refer to r as the perturbation or error term , since it measures the deviation from the one-dimensional dynamics on the fiber. Since our work concerns the Fatou set in higher dimensions, it is necessary to discuss which definition of normality is used. For polynomial skew-products, the choice of normality is clear; however, this is not the case in the transcendental setting. Building on the discussion in [ ABFP19 ] , several viable extensions of the one-dimensional notion exist, depending on which compactification for \mathbb{C}^{2} is used. In this paper, we consider three options: the one-point compactification \widehat{\mathbb{C}^{2}} , the projective space \mathbf{P}_{2}{\mathbb{C}} , and the product space \widehat{\mathbb{C}}\times\widehat{\mathbb{C}} . We show in \Autoref SECTION:2 that for our results the choice of definition is immaterial. Geometrically, when investigating the dynamics near an invariant fiber it is natural to study whether a stable one-dimensional region persists when embedded in the full two-dimensional system. More precisely, one may ask: when does a one-dimensional Fatou component extend to a two-dimensional one? In particular, we seek to understand whether all one-dimensional Fatou components of f on the invariant fiber bulge , that is, extend to two-dimensional Fatou components of F . Bulging creates a direct link between the dynamics on the fiber and the full skew-product near the fiber, potentially reducing the analysis to the well-understood one-dimensional case. This setting and related phenomena have been studied extensively; see, e.g., [ Lil04 ] , [ PV16 ] , [ PS17 ] , [ Ji19 ] , and [ JS25 ] (see also [ Rai16 ] for an overview). In particular, Lilov showed in [ Lil04 ] that periodic one-dimensional Fatou components with bounded orbits on an attracting invariant fiber always bulge. In this paper, we focus on escaping or oscillating Fatou components on the fiber, that is, components for which at least a subsequence of iterates tends uniformly to infinity. This includes escaping and oscillating wandering domains , Baker domains , and basins of attraction at infinity , (these last basins can arise if the skew-product restricts to a polynomial on the fiber). In these cases, we show that the bulging of a component depends sensitively on the perturbation, reflecting the fact that the perturbation may evolve as the orbit escapes to infinity. Our main result shows the existence of perturbations preventing stable behavior around points with unbounded orbits. The main idea is to construct a perturbation that forces nearby orbits to exhibit incompatible behaviors, some escaping to infinity while others remain bounded, thereby destroying normality. Theorem 1.1 . Let f and g be nonconstant entire functions with g(0)=0 . Furthermore, assume that there exists z_{0}\in\mathbb{C} with f^{n_{k}}(z_{0})\to\infty as k\to\infty for some subsequence of iterates. Then there exists h entire such that the point (z_{0},0) belongs to the Julia set of the skew-product F\colon\mathbb{C}^{2}\to\mathbb{C}^{2} defined as (1) F(z,w)=(f(z)+wh(z),g(w)). Observe that, for normality with respect to the compactifications \mathbf{P}_{2}{\mathbb{C}} or \widehat{\mathbb{C}^{2}} , but not (\widehat{\mathbb{C}})^{2} , the fact that 0 is in the Julia set of g does not automatically imply that (z_{0},0) is in the Julia set of F . In particular, our result remains nontrivial even when 0 is in the Julia set of g . As an immediate consequence, we obtain the following result about the existence of non-bulging Fatou components. Corollary 1.2 . Let f and g be nonconstant entire functions with 0 a fixed point of g belonging to the Fatou set of g , and U a Fatou component of f . Furthermore assume that there exists z_{0}\in U with f^{n_{k}}(z_{0})\to\infty as k\to\infty for some subsequence of iterates. Then there exists h entire such that the Fatou component U does not bulge for the skew-product F as defined in ( 1 ). This statement holds for escaping wandering domains, oscillating wandering domains, Baker domains, and basins of attraction at infinity on either an attracting fiber or an invariant fiber in a Siegel disk. Escaping and oscillating domains arise only in the transcendental setting, thus our focus here is mainly on transcendental skew-products. The only exception is when the function reduces to a polynomial on the fiber, which always has a basin at infinity. In this case, the construction still applies and the resulting skew-product is in general non-polynomial. However, the basin at infinity does not need to bulge for polynomial perturbations, as shown in \Autoref EXAMPLE:basininfinity. This provides the only case where a polynomial skew-product has a non-bulging Fatou component on an attracting fiber, showing that basins at infinity for polynomial skew-products can be non-bulging.