Characterisation of rough-wall drag in compressible turbulent boundary layers

D. D. Wangsawijaya 1, R. Baidya 2,3, S. Scharnowski 2, B. Ganapathisubramani 1, C. J. Kähler 2 · 2026

Read Characterisation of rough-wall drag in compressible turbulent boundary layers by D. D. Wangsawijaya 1, R. Baidya 2,3, S. Scharnowski 2, B. Ganapathisubramani 1, C. J. Kähler 2 (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-24288.txt.

Description

Wangsawijaya and co-authors test how to measure rough-wall drag in compressible turbulent boundary layers. Workers usually transform velocities, then read off a momentum deficit and an equivalent sand-grain roughness. That roughness often comes from one Mach and Reynolds setting, which may not transfer. Their experiments use two sandpaper grits across Mach 0.3 to 2.9. The momentum deficit barely depends on the transform used. The fully rough regime shifts with Mach number, though. A temperature-based correction factor gives the most consistent improvement across datasets.

Catalog record

CREATORD. D. Wangsawijaya 1, R. Baidya 2,3, S. Scharnowski 2, B. Ganapathisubramani 1, C. J. Kähler 2
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE72663
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2603.24288

Browse the full library · About the Tower of Babel