Stabilizing Magnetic Bubble Domains in Epitaxial 2D Magnet/Topological Insulator Heterostructures through Interfacial Interactions
Thow Min Jerald Cham, Mowen Zhao, Wenyi Zhou, Andrew Koerner, Dang-Khoa Le, Ziling Li, Lukas Powalla, Derek Bergner, Eklavya Thareja, Camelia Selcu, Sadikul Alam, Sebastian Wintz, Markus Weigand, Jinwoo Hwang, Jacob Gayles, Roland Kawakami, Yunqiu Kelly Luo, Affiliations: Department of Physics, Cornell University, Ithaca, NY, USA · 2026
Read Stabilizing Magnetic Bubble Domains in Epitaxial 2D Magnet/Topological Insulator Heterostructures through Interfacial Interactions by Thow Min Jerald Cham, Mowen Zhao, Wenyi Zhou, Andrew Koerner, Dang-Khoa Le, Ziling Li, Lukas Powalla, Derek Bergner, Eklavya Thareja, Camelia Selcu, Sadikul Alam, Sebastian Wintz, Markus Weigand, Jinwoo Hwang, Jacob Gayles, Roland Kawakami, Yunqiu Kelly Luo, Affiliations: Department of Physics, Cornell University, Ithaca, NY, USA (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-24055.txt.
Introduction
Cham and co-authors image magnetic bubble domains in a layered 2D magnet and topological insulator stack. With scanning transmission X-ray microscopy, they see robust bubble phases from 75 to 165 kelvin after zero-field cooling. Plain Fe3GeTe2 flakes instead show stripe domains, or none when thin. Calculations and simulations explain the change. Contact with Bi2Te3 alters the magnetic anisotropy and adds an interfacial Dzyaloshinskii-Moriya interaction. That shifts the phase balance toward bubbles, with no field cooling needed. They propose interface design as a control knob.
Catalog record
| CREATOR | Thow Min Jerald Cham, Mowen Zhao, Wenyi Zhou, Andrew Koerner, Dang-Khoa Le, Ziling Li, Lukas Powalla, Derek Bergner, Eklavya Thareja, Camelia Selcu, Sadikul Alam, Sebastian Wintz, Markus Weigand, Jinwoo Hwang, Jacob Gayles, Roland Kawakami, Yunqiu Kelly Luo, Affiliations: Department of Physics, Cornell University, Ithaca, NY, USA |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 35301 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2603.24055
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Stabilizing Magnetic Bubble Domains in Epitaxial 2D Magnet/Topological Insulator Heterostructures through Interfacial Interactions Thow Min Jerald Cham, Mowen Zhao, Wenyi Zhou, Andrew Koerner, Dang-Khoa Le, Ziling Li, Lukas Powalla, Derek Bergner, Eklavya Thareja, Camelia Selcu, Sadikul Alam, Sebastian Wintz, Markus Weigand, Jinwoo Hwang, Jacob Gayles, Roland Kawakami, Yunqiu Kelly Luo, Affiliations: Department of Physics, Cornell University, Ithaca, NY, USA Abstract Epitaxial heterostructures of two-dimensional (2D) van der Waals (vdW) magnets and topological insulators offer a powerful platform for probing interfacial spin interactions that govern magnetic textures in low-dimensional quantum systems, while simultaneously enabling highly efficient, atomically thin spin–orbit-torque (SOT) memory and computing architectures. Despite this promise, the fundamental role of these interfacial interactions in determining magnetic domain-phase stability remain largely uncharted. Here, we perform scanning transmission X-ray microscopy to image nanoscale magnetic textures in epitaxial Fe 3 GeTe 2 /Bi 2 Te 3 heterostructures, enabled by a thermal-release-tape dry-transfer process onto X-ray transparent silicon-rich nitride membranes. Under zero-field-cooled (ZFC) conditions, we observe robust bubble-domain phases from 75 – 165 K, and across different number of folds of the multilayer [FGT/ Bi 2 Te 3 ] n heterostructure (n = 1 to 5). This is in stark contrast with exfoliated single-crystal Fe 3 GeTe 2 flakes, where ZFC stripe domains are observed for flakes thicker than 20 nm and no domains have been reported for thin flakes less than 15 nm. First-principles calculations and micromagnetic simulations reveal that interfacial coupling to Bi 2 Te 3 modifies the magnetic anisotropy and introduces interfacial Dzyaloshinskii–Moriya interaction, shifting the magnetic phase space towards bubble-domain stabilization without field-cooling. Together, our results offer a new strategy for phase-selective control of magnetic domains through interfacial engineering. Introduction Van der Waals (vdW) magnets have attracted significant interest for their robust magnetic properties persisting down to atomically thin layers, offering a versatile platform for probing fundamental 2D magnetism and advancing spintronics applications [ 13 , 18 , 7 , 11 , 19 , 24 ] . Their universal layer-by-layer compatibility further enables the exploration of rich interfacial phenomena when integrated with other vdW layers, including spin–orbit torques (SOT) [ 1 , 37 , 15 ] , proximity-induced anisotropy and Curie temperature enhancement driven by interfacial spin–orbit coupling [ 45 , 10 , 26 , 39 ] , and exchange coupling [ 46 , 44 , 6 , 31 ] . Recent demonstrations of high SOT efficiencies in vdW magnet/topological insulator (TI) heterostructures highlight the promise of these systems for ultralow-power magnetic memory and logic [ 29 , 38 , 28 , 17 , 16 , 45 , 35 ] . However, despite growing interest in these heterostructures, how the TI layer can play a role in altering the domain morphology through the balance between magnetic anisotropy, exchange stiffness and interfacial Dzyaloshinskii–Moriya interaction(DMI), remains largely unexplored. This knowledge gap is especially notable given that Fe 3 GeTe 2 exhibits a rich set of field- and history-dependent domain phases, suggesting that even subtle interfacial perturbations could dramatically reshape its magnetic texture. In this study, we focus on investigation of the nanoscale magnetic domain behavoir in vdW ferromagnet/vdW TI heterostructures composed of Fe 3 GeTe 2 (FGT) and Bi 2 Te 3 . FGT is a vdW metallic ferromagnet with a Curie temperature near 200 K. Flakes exfoliated from bulk single crystals host a wide variety of domain phases whose stability depends on thickness, temperature, and magnetic history [ 36 , 8 , 5 , 2 , 30 , 3 , 33 , 12 ] . Recent XMCD and Lorentz-TEM studies mapping the magnetic phase diagram of exfoliated flakes show that ZFC conditions produce stripe domains, with bubble or skyrmion phases arising only under applied fields or field-cooling. Furthermore, these bubble or skyrmion phases are only observed in exfoliated FGT flakes thicker than 20 - 30 nm, while no domains are seen in layers thinner than 15 nm. [ 36 , 2 , 12 ] Interfacing FGT flakes with layered materials such as WTe 2 [ 41 ] , Cr 2 Ge 2 Te 6 [ 40 ] , or (Co/Pd) n [ 42 ] superlattices has been shown to introduce interfacial DMI that stabilize chiral spin textures. Yet proximity effects from topological insulators, where the strong spin–orbit coupling can simultaneously modify magnetic anisotropy [ 9 , 27 , 43 ] and induce chiral interactions on the equilibrium magnetic domain morphology of vdW ferromagnets, remains largely unexplored. This gap has persisted largely because direct, nanoscale imaging of magnetic textures in full epitaxial vdW magnet/TI heterostructures has not previously been feasible. Here, we overcome this challenge by combining large-area molecular beam epitaxy (MBE) with a thermal-release-tape membrane transfer technique, enabling direct scanning transmission X-ray microscopy (STXM) imaging of magnetic textures in fully epitaxial FGT/Bi 2 Te 3 heterostructure [ 45 , 25 ] . This capability reveals that proximity to the topological insulator fundamentally reshapes the magnetic domain-phase landscape of FGT, stabilizing a robust bubble-domain regime under zero-field-cooled conditions across a wide range of temperatures and effective FGT thicknesses. By integrating these measurements with first-principles density functional theory calculations and micromagnetic simulations, we show that interfacial coupling with the TI introduces an interfacial DMI, and through altering the competition between anisotropy, exchange and DMI, shifts the system into a bubble-stabilized region of magnetic domain phase space. Together, these results establish epitaxial FGT/Bi 2 Te 3 heterostructures as a model platform for engineering proximity-driven magnetic textures in low-dimensional magnetic heterostructures. Magnetic Characteristics of Epitaxial Fe 3 GeTe 2 /Bi 2 Te 3 Heterostructures Fig. 1 : MBE-grown epitaxial Fe 3 GeTe 2 /Bi 2 Te 3 heterostructures. (a) Schematic of atomic structure of the van der Waals magnet/topological insulator heterostructure. consisting of five quintuple layers (QL) of Bi 2 Te 3 and eight van der Waals layers of Fe 3 GeTe 2 (partial layers shown for clarity). (b) Optical micrograph of a large-area Fe 3 GeTe 2 /Bi 2 Te 3 film transferred onto an X-ray–transparent silicon-rich nitride (SiRN) membrane using a thermal-release-tape (TRT) process (scale bar: 100 \mu m). (c) Optical magnetic circular dichroism (MCD) hysteresis loops measured at different temperatures, demonstrating strong perpendicular magnetic anisotropy and a Curie temperature of approximately 190 K. (d) Schematic illustration of the full-film TRT transfer process, enabling the transfer of epitaxial Fe 3 GeTe 2 /Bi 2 Te 3 heterostructures from sapphire substrates onto SiRN membranes for XMCD-STXM measurements. Using molecular beam epitaxy (MBE), Bi 2 Te 3 thin films were first synthesized on Al 2 O 3 (0001) via a two-step growth protocol, followed by epitaxial deposition of FGT (S.I.I). Continuous in-situ RHEED monitoring during the growth of both layers ensures layer-by-layer growth and accurate thickness control (Fig. S1), as we have previously demonstrated [ 45 , 14 ] . The chemical compatibility of the two compounds enables the formation of atomically sharp, interdiffusion-free interfaces. For this study, we choose a heterostructure consisting of five quintuple layers of Bi 2 Te 3 ( \approx 5.3 nm) and eight vdW layers of FGT ( \approx 6.4 nm) to optimize magnetic contrast at the Fe L 3 -edge for STXM imaging. The entire heterostructure was capped in-situ with 10 nm Te prior to air exposure to prevent