New Anosov flows via bicontact structures

Tali Pinsky, Federico Salmoiraghi · 2026

Read New Anosov flows via bicontact structures by Tali Pinsky, Federico Salmoiraghi (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-22250.txt.

Introduction

Pinsky and Salmoiraghi build new Anosov flows from bicontact structures on 3-manifolds. Their route goes through hyperbolic plugs built as bicontact plugs. The manifolds are surface bundles over the circle, with quasi-transverse tori as boundaries. A gluing theorem then yields closed manifolds with new transitive Anosov flows. One test case glues two copies of the figure-eight knot complement. It carries many inequivalent flows. Other builds mix figure-eight and trefoil complements. Some known surgeries also arise as Goodman-Fried surgery sequences in this frame.

Catalog record

CREATORTali Pinsky, Federico Salmoiraghi
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE63258
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2603.22250

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

New Anosov flows via bicontact structures Thanks: The authors were supported by the Israel Science Foundation (grant No. 51/4051). Tali Pinsky, Federico Salmoiraghi Abstract . We present a new approach to hyperbolic plugs, via a construction of bicontact plugs on 3-manifolds with boundary that are surface bundles over the circle. The boundary components are quasi transverse tori, and we prove a gluing theorem that allows us to produce closed manifolds carrying new transitive Anosov flows. We show that a toroidal manifold produced by gluing two copies of the figure eight knot complement may carry many nonequivalent Anosov flows, and likewise a manifold composed of a figure eight complement and a trefoil complement. We further show that certain generalized Handel–Thurston surgeries can be realized as sequences of Goodman–Fried surgeries and produce new examples of different surgery sequences resulting in the same Anosov flow. 1. Introduction Anosov flows represent an important class of dynamical systems with remarkable ergodic and geometric properties [ 1 ] . These are among the simplest examples of chaotic dynamical systems. The prototype of an Anosov flow is the geodesic flow on the unit tangent bundle of a hyperbolic surface; another classical example is the suspension flow of an Anosov diffeomorphism of the torus. For nearly two decades, these two types were the only known examples. The introduction of cut-and-paste techniques enabled the construction of many new examples. The first non-transitive Anosov flow was constructed by Franks and Williams [ 12 ] by gluing two figure eight complements along their boundaries, where the boundaries are transverse to the flows. Handel and Thurston [ 16 ] constructed new transitive Anosov flows by gluing pieces of a geodesic flow. In this case the boundary is quasi transverse, i.e. contains a finite number of tangent orbits and transverse annuli between them where the flow points to different directions, yet the pieces glue to a manifold carrying a smooth Anosov flow. Goodman [ 15 ] introduced the first surgery of Dehn type on Anosov flows, interpreting a closed orbit as a knot, and used it to construct the first examples of Anosov flows on hyperbolic manifolds. More recently, Bonatti, Béguin, and Yu [ 4 ] developed a systematic method for constructing Anosov flows by gluing hyperbolic plugs along their transverse boundaries. They produced the first examples of closed 3-manifolds supporting at least n pairwise non-orbit-equivalent Anosov flows for any fixed n\in\mathbb{N} . Bowden and Mann [ 6 ] construct hyperbolic manifolds supporting many Anosov flows. Clay and Pinsky [ 7 ] Construct graph manifolds consisting of two copies of the trefoil complement that carry many transitive Anosov flows, by gluing covers of geodesic flows along quasi-transverse boundaries. Paulet [ 22 ] proved a general theorem that allows to construct new flows from building blocks with quasi-transverse boundaries. These results all rely on the study of the invariant foliations of the flow. Perhaps surprisingly, Anosov flows are also intimately related to contact structures, i.e. maximally non-integrable plane fields. Mitsumatsu [ 20 ] first observed that a vector field defining an Anosov flow can always be viewed as the intersection of a pair of transverse contact structures, one positive and one negative. Not every such bicontact structure defines an Anosov flow. However, Hoozori recently proved a converse theorem: a flow is Anosov if and only if it is defined by a strongly adapted bicontact structure i.e., one satisfying the condition that the Reeb flow of one structure is contained in the plane field of other structure in the pair (see [ 17 ] ). The Reeb vector field is called the Legendrian Reeb field. We call the flow defined by the intersections of the two plane fields the supported flow. The goal of the present work is to use the relation between Anosov flows and contact geometry to introduce a method for constructing building blocks with controlled geometry, and to use them to produce new examples of transitive Anosov flows. We say a vector field is periodic on \partial M if it is tangent to the boundary, and its orbits on the boundary are all periodic. Theorem 1.1 (Gluing theorem) . Let \mathcal{M}_{1} and \mathcal{M}_{2} be 3 -manifolds with boundary, carrying strongly adapted bicontact structures. If the Legendrian Reeb vector fields are periodic on two components T_{1}\subset\partial\mathcal{M}_{1} and T_{2}\subset\partial\mathcal{M}_{2} and the number of tangent orbits of the flow defined by the intersection is equal, then they can be glued, yielding a strongly adapted bicontact structure on \mathcal{M}=\mathcal{M}_{1}\cup\mathcal{M}_{2} . Thus, when we glue all boundary components we obtain a closed manifold carrying an Anosov flow by [ 17 ] . In particular, no explicit cone criterion for hyperbolicity is necessary. The Fried Conjecture states that any transitive Anosov flow is obtained through a finite sequence of Goodman-Fried surgeries from the suspension flow of a hyperbolic linear automorphism of the torus (i.e. it is almost orbit equivalent to a suspension) [ 13 ] . Dehornoy and Shannon [ 8 ] showed that the geodesic flow of a negatively curved orbifold is almost orbit equivalent to a suspension flow of a hyperbolic linear automorphism of the torus. Tsang [ 26 ] established this for some further cases. We use our framework to construct new examples of Anosov flows on toroidal manifolds, and show that they are almost equivalent to geodesic flows. The building blocks we use are surface bundles over the circle, where the fiber \Sigma_{g,b} is a genus g surface with b boundary components (these are three manifolds with toroidal boundaries). Let V be a vector field with b non-positive index singularities on a surface \Sigma_{g} . Consider a finite family C=\{c_{1},\cdots,c_{r}\} of non-separating curves on \Sigma_{g,b} that are transverse to V , and let \Lambda_{C} be the subgroup of \MCG(\Sigma_{g,b}) generated by Dehn twist along the curves in C . Theorem 1.2 (Generating bundle plugs) . For every f\in\Lambda_{C} the mapping torus \mathcal{M}_{f} with fiber \Sigma_{g,b} and monodromy f carries a bicontact structure so that f is the first return map of a Legendrian Reeb vector field. Furthermore, the supported flows can be embedded in an Anosov flow on a closed manifold, and are almost orbit equivalent to geodesic flows. The bicontact structure is explicitly constructed as a union of a vertically invariant contact structure \xi_{-} approximating the fiber \Sigma_{g,b} , and a vertically rotating contact structure \xi_{+} . Surprisingly, we can allow the structure \xi_{+} to rotate more than once, obtaining infinitely many bicontact structures. If the surface \Sigma_{g,b} is a torus with b boundary component T^{2}_{b} there is a simple vector field V such that there is a complete set \{c_{1},\cdots,c_{b+1}\} of curves so that Dehn twists on them generate the pure mapping class group, and they are all transverse to V . Thus we obtain the following. Proposition 1.3 (Punctured torus bundles) . Let T^{2}_{b} denote the b -times punctured torus. Every T^{2}_{b} -bundle over the circle admits infinitely many strongly adapted bicontact structures \mathcal{B}^{k}=(\alpha_{-}^{k},\xi_{+}^{k}),\ k\in\mathbb{N} such that \xi_{+}^{n} is isotopic to \xi_{+}^{m} if and only if n=m . Each boundary component is quasi-transverse for the supported flow X^{t} and periodic for R_{-}^{k} . Recently Bonatti, Béguin, Ma and Yu [ 5 ] have also constructed transitive Anosov flows on closed fibered

Read the complete text