Decoupling Precipitation and Surface Complexation during Mn(II) Removal by Biochar via Experiments and Atomistic Simulations
Audrey Ngambia, Anastasiia Gavrilova, Haitao Huang, Zhuodong Lyu, Ondřej Mašek, Margaret Graham, Valentina Erastova · 2026
Read Decoupling Precipitation and Surface Complexation during Mn(II) Removal by Biochar via Experiments and Atomistic Simulations by Audrey Ngambia, Anastasiia Gavrilova, Haitao Huang, Zhuodong Lyu, Ondřej Mašek, Margaret Graham, Valentina Erastova (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-22144.txt.
Introduction
Ngambia and co-authors study how biochar pulls manganese from mine-affected water. Two routes can do the work: precipitation and surface binding. The team runs column and batch tests with oilseed rape straw biochars. Biochar made at 700 degrees removes about half the manganese. It raises the water's pH to 9, which triggers precipitation. Cooler biochars remove 20 to 30 percent at near-neutral pH. Atomistic simulations point to ion exchange and inner-sphere binding there. The results give design rules for targeted biochars.
Catalog record
| CREATOR | Audrey Ngambia, Anastasiia Gavrilova, Haitao Huang, Zhuodong Lyu, Ondřej Mašek, Margaret Graham, Valentina Erastova |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 46281 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2603.22144
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Decoupling Precipitation and Surface Complexation during Mn(II) Removal by Biochar via Experiments and Atomistic Simulations Audrey Ngambia, Anastasiia Gavrilova, Haitao Huang, Zhuodong Lyu, Ondřej Mašek, Margaret Graham, Valentina Erastova Abstract Manganese(II) mobilised by mining activity poses a persistent water-quality challenge, yet the mechanisms by which low-cost sorbents, such as biochar, sequester Mn(II) remain poorly resolved. This study identifies the specific chemical drivers of Mn(II) sequestration by combining fixed-bed column and batch experiments with atomistic molecular dynamics simulations. Oilseed rape straw biochars, produced at 350°C, 550°C, and 700°C, removed 20-50% of dissolved Mn from acidic influent (pH 4, 5 ppm). High-temperature biochar achieved the greatest removal ( ∼ \sim 50%) and rapidly increased effluent pH to 9, triggering alkaline precipitation. Conversely, lower-temperature biochars removed 20-30% of Mn while maintaining a near-neutral pH (7-7.5). Enhanced K + \text{K}{\vphantom{\text{X}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{}}\text{+}} release in these systems indicates significant cation exchange and non-precipitative pathways. Molecular simulations confirmed that while neutral surfaces show weak Mn(II) association, deprotonated sites drive strong adsorption through inner-sphere complexation ( ∼ \sim 50% removal) and outer-sphere association ( ∼ \sim 10%). These results establish a mechanistic framework to distinguish between precipitation-led and surface-complexation-led removal. By providing specific chemical criteria for Mn-targeted sequestration, this work enables the rational design of engineered biochars for sustainable water remediation. keywords biochar molecular models, molecular dynamics, manganese removal, mechanisms of adsorption † † affiliation: School of Chemistry, University of Edinburgh, Joseph Black Building, David Brewster Road, EH9 3FJ, United Kingdom † † affiliation: School of GeoScience, University of Edinburgh, Alexander Crum Brown Road, EH9 3FF, United Kingdom † † affiliation: School of Chemistry, University of Edinburgh, Joseph Black Building, David Brewster Road, EH9 3FJ, United Kingdom † † affiliation: School of Chemistry, University of Edinburgh, Joseph Black Building, David Brewster Road, EH9 3FJ, United Kingdom † † affiliation: UK Biochar Research Center, School of GeoScience, University of Edinburgh, Alexander Crum Brown Road, EH9 3FF, United Kingdom † † email: [email protected] † † affiliation: School of GeoScience, University of Edinburgh, Alexander Crum Brown Road, EH9 3FF, United Kingdom † † email: [email protected] † † affiliation: School of Chemistry, University of Edinburgh, Joseph Black Building, David Brewster Road, EH9 3FJ, United Kingdom † † suppinfo: Synopsis : Experiments and atomistic simulations decouple Mn(II) removal by biochar into exchange-driven pH increase, deprotonation-enabled surface complexation, and high-pH precipitation – highlighting presence of deprotonatable functionalities as key design rules. 1 Introduction Manganese (Mn) is a redox-active trace metal that becomes a water-quality concern when mobilised into surface and ground waters at elevated concentrations. Cannon et al. 2017 ; Coles et al. 2012 While Mn is essential for biological function, sustained exposure to elevated dissolved Mn can pose ecological and human-health risks, and is increasingly recognised as an important contaminant in mining-impacted catchments. Coles et al. 2012 Mining activity is a major contributor, as extraction, processing, and mine-waste releases can mobilise Mn and co-occurring metals into adjacent waters. The Fundão tailings dam failure in Mariana (Brazil, 2015) illustrates the persistence of Mn contamination following such events, with reported exceedances above regulatory thresholds across the affected watershed. Fernandes et al. 2016 ; Queiroz et al. 2018 ; Queiroz et al. 2021 Current treatment options for heavy metal contaminated waters (e.g., chemical precipitation, membranes, and biological approaches) can be costly, energy-intensive, or slow-acting, limiting their scalability. Neculita and Rosa 2019 ; Chang et al. 2022 ; Wu et al. 2022 Adsorption offers a technically straightforward alternative, motivating the development of low-cost sorbents. Tan et al. 2022 Biochar is an attractive candidate because its carbon-rich structure contains surface functionalities capable of metal binding, while its mineral fraction can drive ion exchange and alkalinity changes. Meng et al. 2025 However, these contributions often occur simultaneously, complicating mechanistic attribution and limiting the rational design of Mn-targeted biochars. Indeed, several studies report substantial Mn removal by ash-rich biochars, yet most control only the initial solution pH and do not quantify pH evolution during exposure. Idrees et al. 2018 ; Kim et al. 2020 ; Ma et al. 2023 This is important because dissolution of ash-derived alkali and alkaline-earth cations can raise solution pH into a regime where Mn(II) oxidation and precipitation of Mn(III/IV) (hydr)oxides becomes favourable. Morgan and Stumm 1964 ; Gabelich et al. 2006 (A more detailed discussion of prior Mn–biochar studies and the role of ash-driven pH evolution is provided in Section , SI.) Consequently, apparent “adsorption” capacities may reflect a coupled sequence of ion exchange, alkalinity generation, surface complexation, and precipitation rather than a single dominant pathway. A recent study of the Standard Biochars further indicates strong feedstock dependence, with straw-derived biochars consistently outperforming woody biochars for Mn removal. Pulcher et al. 2026 ; Mašek et al. 2018 Nevertheless, it remains unclear whether this behaviour is governed primarily by mineral inventory (ash/cationic exchange driven alkalinity increase and Mn oxidation and precipitation) or by the biochar-surface chemistry (functional-group density and speciation) that may enable Mn surface complexation. Experimentally, it is difficult to disentangle the respective contributions of the biochar matrix, surface functional groups, ash-driven alkalinity, and exchangeable cations to Mn removal, because these processes co-occur and mutually reinforce one another during exposure. Therefore, we leverage our recent advances in experimentally-constrained atomistic biochar molecular simulations Wood et al. 2024 ; Wood et al. 2024 ; Ngambia et al. 2024 ; Wood et al. 2026 to quantify how (i) pyrolysis temperature and (ii) feedstock-dependent biochar chemical structures control Mn(II) association with the carbonaceous material. Crucially, the simulations provide an ash-free baseline and atomistic level detail of the adsorption mechanism that cannot be resolved from bulk experiments alone. Furthermore, we complement this work with targeted fixed-bed column and batch experiments using oilseed rape straw biochars, identified by Pulcher et al. as consistently high-performing for Mn removal. Pulcher et al. 2026 We extend sampling across the pyrolysis temperature range by including 350°C, alongside standard 550°C and 700°C, while explicitly monitoring pH evolution and cation release. Integrating these datasets enables mechanistic attribution of observed Mn removal to precipitation-led versus surface-complexation-led pathways, and provides transferable chemical design criteria for Mn-targeted biochars. 2 Materials and Methods 2.1 Molecular models and simulations 2.1.1 Choice of key descriptors for the development of biochar molecular models Our selection of biochars is informed by the study of Pulcher et al. , Pulcher et al. 2026 where the performance of a set of Standard Biochars by the UK Biochar Research Center (UKBRC) was studied. Woody biochars (willow chips and softwood derived) generally had significantly lower Mn removal capacity than those derived from straw (oilseed rape straw and wheat straw) – therefore, we compare their experimentally measured characteristics, Table , SI. The biochars reported to have good performance (oilseed rape straw derived: OSR550, OSR700; and wheat straw derived: WS550, WS700) have a higher ash content ( \sim 20%), associated with a higher pH ( \sim 9-10), and also feature a higher amount of nitrogen than those derived from softwood (SW550 and SW700). Since our modelling goal is to decouple interactions between Mn and biochar molecular structure from ash effects, we use molecular models that represent only the carbonaceous fraction and surface functionalities. To capture how biochar-forming structures produced at high and low temperatures control Mn adsorption, we built models representative of