Mechanical stress induced by the polymerisation of an active gel near a surface Preprint: APS/123-QED
Kristiana Mihali, Dennis Wörthmüller, Pierre Sens · 2026
Read Mechanical stress induced by the polymerisation of an active gel near a surface Preprint: APS/123-QED by Kristiana Mihali, Dennis Wörthmüller, Pierre Sens (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-21919.txt.
Introduction
Mihali and co-authors model the stress from a growing active gel near a surface. The setup mimics actin in the cell cortex, which polymerizes at the membrane and turns over. A hydrodynamic model couples actin flow, density relaxation, and friction with the membrane. For a wavy surface, they solve the stress pattern at linear order. Limiting cases get analytic answers, while the general case uses finite elements. The map shows when compressibility, friction, and turnover let polymerization destabilize the membrane. The nonlinear regime is touched on too.
Catalog record
| CREATOR | Kristiana Mihali, Dennis Wörthmüller, Pierre Sens |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 48705 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2603.21919
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Mechanical stress induced by the polymerisation of an active gel near a surface Preprint: APS/123-QED Kristiana Mihali, Dennis Wörthmüller, Pierre Sens Abstract Actin flow in the cortical cytoskeleton underneath the cell membrane generates mechanical stresses that shape the cell surface. We study this mechanism using an hydrodynamic model of a compressible active gel polymerising at the membrane and undergoing turnover. We determine how actin flow, density relaxation and friction of actin with the membrane generate stress on a corrugated membrane at the linear order in deformation. Analytical solutions in limiting regimes, combined with finite element methods in the general case, provide a map of normal and tangential stresses as functions of compressibility, interfacial friction and actin turnover, and determine the conditions under which actin polymerisation can render the membrane linearly unstable. The non-linear regime is also briefly discussed. Cells continually sense and reshape themselves in response to mechanical and geometrical features of their environment. A central player in this mechano-geometrical response is the actin cortex: a dynamic network of polymerizing filaments that supports the plasma membrane and generates stresses capable of deforming it Salbreux et al. 2012 . A key question is how the cortical flows arising from actin polymerisation can transmit normal and tangential forces to a curved membrane and how such forces depend on the properties of the cortex coupled to the geometry of membrane. In a recent work, Mihali et al. 2025 , we proposed an hydrodynamic theory for a free-standing viscous and incompressible actin gel growing on a corrugated membrane. Curvature sensitive actin nucleators with spontaneous curvature such as BAR domain proteins Zhao et al. 2011 modulate the local actin polymerization rate in a curvature-dependent manner. This feedback destabilizes a flat membrane when the curvature-sensitivity of actin polymerization exceeds a threshold. This work established how curvature-dependent normal stress emerges from growth-driven flow and may amplify geometric perturbations. The analytical results reported in Mihali et al. 2025 relied on the simplifying assumptions that the cortex can be treated as an incompressible viscous fluid. The viscous assumption is justified for phenomena involving time scales larger than the visco-elastic relaxation time of the actin gel. However the incompressibility condition is more questionable. While it allows for analytical progress, its relevance must be assessed precisely, which is done in the present work. In the incompressible limit, we have previously shown that force transmission between the actin gel and the membrane is independent the friction between the two materials, which convert relative movement into tangeantial (shear) stress Mihali et al. 2025 . We show here that the gel stress on the membrane does depend on friction for a compressible gel and we quantitatively assess the importance of this parameter in the transmission of polymerisation stress and interface stability. In this work, we focus on the activity stemming from polymerisation and turnover, and disregards other kind of activity, such as the contractile activity generated by molecular motors (myosin) which have also been shown to lead to large fluctuation with complex dynamics Levernier and Kruse 2020 . I Model We describe a compressible, viscous actin gel that polymerizes against a corrugated membrane described by its height u(x) compared to some reference (flat) plane. This so-called Monge representation is appropriate for moderate deformations that do not have overhangs. In what follows, we mostly concentrate on small deformation (| \nabla u|\ll 1 ) for which any shape can be expanded in Fourier modes: u(x)=\sum_{q}u_{q}e^{iqx} . The actin network polymerizes at the membrane interface and occupies the half-space z\geq 0 . Actin monomers are continuously added at the membrane at a rate characterised by a polymerisation velocity v_{p} . Filament turnover removes polymerized actin at a constant rate k_{d} throughout the gel layer. This situation is represented in Fig. 1 . Figure 1: Viscous, compressible actin gel polymerizing on a wavy membrane. Actin polymerizes at a speed at v_{p} at the membrane and depolymerises at a rate k_{d} throughout the layer, resulting in an actin density \rho decaying away from the membrane. This sets the layer thickness h . I.1 Constitutive law and mass conservation. The actin density \rho and the velocity field v , in the presence of turnover, satisfy the mass conservation equation \partial_{t}\rho+\nabla\cdot(\rho\bm{v})=-k_{d}\rho\;. (1) We model the gel as a compressible Newtonian fluid satisfying the constitutive stress relation \bm{\sigma}=(-P(\rho)+\eta_{b}\nabla\cdot\bm{v})\bm{I}+\eta(\nabla\bm{v}+\nabla\bm{v}^{\text{T}})\;. (2) Here \eta and \eta_{b} are the shear and bulk viscosity, respectively, and P(\rho) is the density-dependent gel pressure. For simplicity, we assume that \eta is constant and disregard the contribution of bulk viscosity ( \eta_{b}=0 ) in the main text. The contribution of \eta_{b} to the various expression for the stress is given in Appendix A . At low Reynolds number and in the absence of body forces, the Stokes equation reads \nabla\cdot\bm{\sigma}=0\;. (3) For an incompressible gel, the pressure P acts as a Lagrange multiplier that enforces a constant gel density \rho=\rho^{*} . For a fully compressible gel, the pressure vanishes, and the density can vary without mechanical consequences. The visco-elastic properties of actin gels in-vitro have been extensively characterised and are strongly influenced by the density and flexibility of filaments and cross-linkers and their turnover rate Xu et al. 1998 ; Salbreux et al. 2012 ; Fischer-Friedrich et al. 2016a . One can generally expect a short-time elastic behaviour with long-time viscous-elastic relaxation, with a crossover influenced by the cross-linkers lifetime. However these studies on stabilised filaments do not recapitulate the effect of turnover, which is central to the present study. Actin turnover should lead to a compressible viscous fluid behaviour at long-time Jülicher et al. 2007 but also controls the thickness of the gel in our case, where polymerisation occurs at the membrane. In this long-time regime, actin turnover, crosslink dynamics and related microscopic processes continuously rearrange actin filaments and crosslink so the density of actin can vary. Local compression or dilution of the network will appear in a coarse-grained level as a restoring stress that will be proportional to the density deviating from the target value, with proportionality coefficient \chi . Here we adopt a linear relationship between pressure and density P=\chi(\rho-\rho^{*}) (4) where \chi is a phenomenological gel bulk modulus. This expression does not directly include visco-elastic relaxation. Therefore the modulus \chi should be considered as a phenomenological parameter that allows to continuous extrapolate between the fully compressible ( \chi=0 ) and incompressible ( \chi\rightarrow\infty ) cases. I.2 Boundary conditions. We denote by \bm{n}_{m},\bm{t}_{m} the vectors normal and tangent to the membrane surface respectively (Fig. 1 ). At the boundary defined by the membrane surface, we assume that the actin gel polymerises at its natural density; \rho_{z=0}=\rho^{*} . Polymerisation generates a normal actin velocity \bm{v}|_{z=0}\cdot\bm{n}_{m}=(v_{p}+\delta v_{p}+\partial_{t}u/\sqrt{1+(\partial_{x}u)^{2}}) , where \delta v_{p} accounts for small, protein regulated local modulations of actin polymerisation Mihali et al. 2025 . The interfacial mechanics includes a frictional coupling between the gel and the membrane (\bm{\sigma}|_{z=0}\cdot\bm{n}_{m})\cdot\bm{t}_{m}=\xi\bm{v}|_{z=0}\cdot\bm{t}_{m} , with \xi the friction coefficient. In the incompressible limit, the gel velocity and therefore the actin flux reach zero at a particular distance from the surface, equal to h_{0}=v_{p}/k_{d} for a flat surface, and modulated periodically for a sinusoidal surface Mihali et al. 2025 . As there are no source of negative actin flux away from the membrane,