Measurement of traveling pressure waves inside a droplet
Sayaka Ichihara, Samuele Fiorini, Yoshiyuki Tagawa, Outi Supponen · 2026
Read Measurement of traveling pressure waves inside a droplet by Sayaka Ichihara, Samuele Fiorini, Yoshiyuki Tagawa, Outi Supponen (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-21905.txt.
Introduction
Ichihara and co-authors measure pressure waves inside a tiny droplet hit by an underwater shock. Such shocks matter for fuel combustion and gentle medical treatments, but they are hard to quantify. Their method adapts background-oriented schlieren imaging, with a new ray-tracing correction, sync gear, and a projected backdrop. They tracked shocks inside and outside a millimetric perfluorohexane drop in water. Sound speeds, the shock focus point, and peak pressure all matched simulations. The setup also caught a phase shift at focusing only guessed before.
Catalog record
| CREATOR | Sayaka Ichihara, Samuele Fiorini, Yoshiyuki Tagawa, Outi Supponen |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 65702 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2603.21905
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Measurement of traveling pressure waves inside a droplet Sayaka Ichihara, Samuele Fiorini, Yoshiyuki Tagawa, Outi Supponen Abstract Shock wave–droplet interactions have been receiving increasing attention due to their relevance in aviation fuel combustion and minimally invasive medical treatments, yet quantifying them experimentally remains a challenge. In this study, we propose a background-oriented schlieren (BOS) technique for quantitative spatiotemporal measurements of shock wave-droplet interaction, employing a novel ray-tracing correction, a synchronization system, and a projected background. Underwater shock waves propagating both inside and outside a millimetric perfluorohexane droplet immersed in water are experimentally measured. The quantified density-gradient and pressure fields are compared with numerical simulations, and the BOS measurements—including sound speeds, the shock-focusing location, and the maximum pressure—are found to be in close agreement with the numerical results. Notably, the technique successfully captures the phase shift before and after shock focusing that had previously only been hypothesized. 1 Introduction Shock wave-droplet interactions have been extensively studied for their many practical applications, including agricultural sprays 51 ; 49 , aircraft propulsion systems 18 ; 56 , rainfall phenomena 8 ; 12 , and drug delivery 36 . When a shock wave interacts with a droplet, depending on its strength, deformation and breakup may occur due to viscous drag, Rayleigh–Taylor instability, or shear 54 . Recent studies indicate that, prior to droplet deformation, shock waves within the droplet can generate tensile stresses that induce phase transitions from liquid to gas 47 ; 11 . However, quantifying the internal dynamics poses technical challenges for both numerical and experimental approaches. Igra et al. demonstrated similarities between the breakup dynamics of a cylindrical water column and a spherical droplet driven by a shock wave 21 . The water column configuration has therefore been widely adopted to study shock wave–droplet interactions, as it allows easy control of the droplet radius and position, provides optical access, and enables a valid two-dimensional approximation. As a result, both experimental and numerical studies have been able to expand their focus beyond droplet deformation to internal phenomena, including shock-wave propagation within the droplet. Numerical simulations offer the advantage of resolving shock-wave propagation and droplet deformation in detail 21 . However, their applicability often relies on fitted parameters derived from quantitative measurements 56 ; 12 ; 5 and becomes increasingly challenging and computationally expensive when phase transitions and complex non-homogeneous media are involved 64 . Quantitative measurement results are required to support the limitations of numerical simulations 12 ; 15 . Non-contact visualization techniques, including Schlieren imaging 8 , shadowgraphy 47 , and holographic interferometry 22 ; 23 , have been widely employed to visualize shock-wave propagation and droplet deformation. While these methods provide image intensity related to first- or second-order density variations, quantitative evaluation generally requires complex calibration procedures, and fully quantitative measurements remain limited 48 . To address these challenges, a quantitative approach based on schlieren imaging combined with piezoelectric sensors in a water column was proposed 47 . However, contact-based sensors disturb the flow field, making their application to droplets difficult. Figure 1: Schematic of the experimental setup for the proposed BOS technique for quantitative measurements inside a droplet. A perfluorohexane (PFH) droplet is placed on an agarose gel substrate in water to stabilize its position. The origin of the ( x,y,z ) coordinate system is set at the center of the droplet. A shock wave propagates along the x -axis from left to right. A background pattern is projected and positioned at z=l_{b} along the optical axis, and the camera is focused on the background. Particle image velocimetry (PIV) has been successfully applied to measure velocity fields inside and around droplets in microchannels 26 ; 34 ; 37 , evaporating droplets 24 , and acoustically levitated droplets 66 . A major challenge in non-contact measurements of shock wave–droplet interactions is optical distortion arising from the refractive-index difference between the droplet and the surrounding fluid. In PIV, this distortion has been corrected using ray-tracing corrections 24 ; 38 ; 28 and index-matching techniques 55 . Another challenge is capturing pressure waves exceeding several MPa in amplitude and propagating at the speed of sound. PIV is unsuitable in this regime because tracer particles cannot follow the shock waves, and the required temporal resolution is difficult to achieve 37 . Background-oriented schlieren (BOS) is a simple optical technique based on the relationship between refractive index and density 58 ; 43 . It measures the distortion of a background pattern induced by refractive-index variations, which is proportional to the line-of-sight–integrated density gradient 35 ; 58 . BOS does not require calibration experiments, as it relies solely on the distortion of the background pattern. Using a projected background instead of a physical one, quantitative measurements can be performed without disturbing the flow 32 ; 39 . Moreover, the high spatiotemporal resolution required for quantitative shock measurements can be achieved by applying a synchronization technique 20 ; 16 . In this study, we propose background-oriented schlieren with a projected background as an easy-to-implement, quantitative and non-invasive measurement technique for shock waves propagating inside a spherical droplet. An illustrative schematic of the experimental setup is shown in Fig. 1 . Optical distortions caused by refractive-index difference are taken into account by applying a proposed ray-tracing correction. We utilize an enhanced BOS technique developed by the authors—fast checkerboard demodulation (FCD) and vector tomography-BOS (VT-BOS). These methods provide higher spatial resolution and improved measurement accuracy compared to conventional BOS, making them particularly suitable for shock wave measurements 50 ; 19 . The experimentally quantified, spatio-temporally resolved integrated density gradient is compared with numerical simulation results to evaluate shock-wave propagation characteristics, including its distribution, propagation speed, and focusing position. On the other hand, the measured pressure field, including its uncertainty, is compared with numerical simulations to evaluate the measurement accuracy. 2 Measurement principle 2.1 Background-oriented schlieren Figure 2: A schematic of the BOS theory. BOS is a non-contact quantitative measurement technique that only requires a background and a camera 43 . The principle of BOS relies on the relationship between the refractive index n and the density \rho , which is expressed by the Gladstone–Dale equation: \displaystyle n=\rho K+1, (1) where K is the Gladstone–Dale constant 58 ; 59 . A typical optical alignment of BOS on the y - z plane is illustrated in Fig. 2 . The image sensor, camera lens, projected background, and target are positioned along the optical axis of the camera. The background is projected into the fluid using two lenses 32 . The camera’s focal plane is aligned with the image plane of the projected background. Herein the distance between the two lenses and the background determines the position of the projected image, whereas the focal length of the two lens governs the projection magnification. The green line represents a light ray that passes through the center of the background and is captured by the sensor when the target is not present in the optical path, while the yellow line represents the same light ray refracted by the target. The deviation angle \bm{\varepsilon} between the yellow and green lines contains information about the integrated gradient of the refractive index along the optical axis 58 : \displaystyle\bm{\varepsilon}=\left(\varepsilon_{x},\varepsilon_{y}\right) \displaystyle=\frac{1}{n_{0}}\int^{l_{b}+\Delta l_{b}}_{l_{b}-\Delta l_{b}}\frac{\partial n}{\partial\bm{r}}dz \displaystyle=\frac{1}{n_{0}}\int^{l_{b}+\Delta l_{b}}_{l_{b}-\Delta l_{b}}\left(\frac{\partial