Gate-based Readout and Cooling of Neutral Atoms
Richard Bing-Shiun Tsai, Lewis R. B. Picard, Xiangkai Sun, Yuan Le, Kon H. Leung, Manuel Endres · 2026
Read Gate-based Readout and Cooling of Neutral Atoms by Richard Bing-Shiun Tsai, Lewis R. B. Picard, Xiangkai Sun, Yuan Le, Kon H. Leung, Manuel Endres (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-21643.txt.
Introduction
Tsai and co-authors give neutral atom arrays tools to fight atom loss and heating. The tools use helper atoms, called ancilla atoms, plus strong Rydberg gates. Repeated ancilla readout raised detection fidelity over rounds while barely touching data atoms. The team also moved quantum data from electronic states into motional states of strontium atoms. That step allows loss checks mid-circuit that keep coherence intact. A cooling routine then shifts motional heat from data atoms onto ancilla atoms, and the data atoms' temperature dropped clearly.
Catalog record
| CREATOR | Richard Bing-Shiun Tsai, Lewis R. B. Picard, Xiangkai Sun, Yuan Le, Kon H. Leung, Manuel Endres |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 31941 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2603.21643
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Gate-based Readout and Cooling of Neutral Atoms Richard Bing-Shiun Tsai, Lewis R. B. Picard, Xiangkai Sun, Yuan Le, Kon H. Leung, Manuel Endres Abstract Neutral atom arrays have seen tremendous progress in quantum simulation, quantum metrology, and fault-tolerant quantum computing. However, hardware constraints such as atom loss and heating remain significant challenges. In this work, we introduce a comprehensive ancilla-based toolbox for optical tweezer experiments that utilizes high-fidelity Rydberg entangling gates and ancilla atoms to mitigate these physical limitations. First, we demonstrate repeated ancilla-based atom readout, achieving improved detection fidelity over multiple rounds with minimal perturbation to data atoms. Second, leveraging the quantized motional states in tweezer-trapped strontium atoms, we transduce quantum information from the electronic to the motional manifold. This enables us to perform mid-circuit ancilla-based atom loss detection in a coherence-preserving fashion. Finally, we demonstrate algorithmic cooling, a circuit-based sequence that deterministically cools data atoms by transferring their motional entropy to the electronic states of ancilla atoms. We observe a marked reduction in the atomic temperature of data atoms. These tools offer a pathway to continuous operation in tweezer clocks and complement recent developments in continuous reloading experiments. Introduction. —Neutral atom arrays have rapidly developed as a compelling platform for quantum science, leading to numerous advances in quantum simulation Shaw et al. 2024a ; Qiao et al. 2025 ; Evered et al. 2025 , quantum metrology Finkelstein et al. 2024 ; Cao et al. 2024 ; Bornet et al. 2023 , and fault-tolerant quantum computing Bluvstein et al. 2026 ; Sales Rodriguez et al. 2025 . However, inherent to optical trapping are several underlying error mechanisms, such as heating from trapping light Savard et al. 1997 and atom loss from background gas collisions Manetsch et al. 2025 ; Zhang et al. 2025 ; Schymik et al. 2021 , which become increasingly deleterious as computational tasks are extended to longer durations. While recent work has shown that loss-aware decoding may enable fault-tolerant quantum computing with neutral atoms even in the presence of atom loss Bluvstein et al. 2026 , the performance of such schemes remains ultimately limited by the underlying physical atom loss rates and mid-circuit measurement fidelities. Moreover, direct detection of atom presence often results in heating via photon scattering, necessitating additional cooling for subsequent protocols to mitigate decoherence and atom loss Covey et al. 2019 ; Radnaev et al. 2025 . Ancilla-based detection schemes provide a powerful means to circumvent the invasiveness of direct detection Finkelstein et al. 2024 ; Bluvstein et al. 2024 ; Anand et al. 2024 ; Muniz et al. 2025 ; Machu et al. 2025 . In these protocols, information about the data atoms (either atom presence or quantum state) is mapped to the ancilla atoms and subsequently retrieved during mid-circuit readout, leaving the data atoms minimally perturbed. However, the effectiveness of such ancilla-based schemes is often limited by the mid-circuit readout fidelity Norcia et al. 2023 ; Deist et al. 2022 ; Graham et al. 2023 and the mapping process involving entangling gates. Critically, such schemes must also preserve data qubit coherence. While it is well established in trapped ion platforms Stricker et al. 2020 , coherence-preserving atom loss detection was only recently demonstrated in neutral atom experiments for hyperfine qubits; albeit without mid-circuit readout Chow et al. 2024 . Figure 1: Overview of ancilla-based toolbox for tweezer array experiments. (a) Sketch of our experimental setup. The one-dimensional tweezer array, generated by an acousto-optical deflector (not shown), supports in-situ dynamical array reconfiguration and local arbitrary Z gate implementation via single-site atom movements. Global clock and Rydberg laser beams propagate co-linearly along the array, implementing single-qubit gates and entangling gates, respectively. Global imaging is achieved with a pair of counter-propagating angled beams overlapping with the whole array. (b) Relevant electronic states of atomic strontium. We encode quantum information in {}^{3}\text{P}_{0} (the clock state) and {}^{1}\text{S}_{0} (the ground state), which we denote \ket{\uparrow} and \ket{\downarrow} , respectively. Motional Fock states in the tweezer are denoted by \ket{n_m} , with the first two \ket{1_m} and \ket{0_m} employed during mid-circuit readout. Collectively, these states constitute a motional omg -architecture, adapted for tweezer-trapped {}^{88}\text{Sr} atoms. (c) The three main ancilla-based applications demonstrated with ancilla atoms (blue) and data atoms (purple) in this work: repeated atom readout, coherence-preserving atom loss detection, ancilla-assisted removal of motional excitation (i.e., algorithmic cooling). Figure 2: Repeated ancilla-based atom readout. (a) Circuit representation of the scheme. Data atoms, if present, are initialized in the electronic excited state \ket{\uparrow} . Under ideal conditions, the data atom remains unperturbed and a new ancilla atom is brought in via dynamical array reconfiguration after each round of ancilla-based atom detection. (b) Decomposition of CNOT gate (shown in (a)) and calibration of the single-atom phase \phi after the Rydberg pulse. We maximize the ancilla atom population in \ket{\downarrow} ( \ket{\uparrow} ) if data atom is present (absent). The electronic state of the data atom is insensitive to this phase \phi thanks to the site-selective Z gate implemented via local atom movement. Solid lines are sinusoidal fits. (c) Histograms of ancilla signal obtained from repeated mid-circuit readout for two distinct configurations: data atom absent (red), and data atom present (blue). The ancilla signals up to N_{\text{cyc}} cycles are aggregated by an unweighted, cumulative sum. The initial overlap of the two distributions for N_{\text{cyc}}=1 is limited by the fast imaging fidelity on the ancilla atom and CNOT gate fidelity. As N_{\text{cyc}} increases, the distributions separate further, demonstrating improved detection with repeated ancilla-based readout. (d) From the histograms, we compute the detection fidelity F with data atom presence prior P_{1} and classification fidelity F_{1} ( F_{0} ) in the presence (absence) of the data atom. For each P_{1} and N_{\text{cyc}} , a classification threshold needs to be determined to obtain F_{1} and F_{0} . This threshold is optimized against the overall detection fidelity F . As N_{\text{cyc}} increases, we see a gradual improvement in F , a quantitative trend supporting the visual separation of the two distributions in (c). (e) From sideband spectroscopy, we infer an average motional occupation number of 0.002^{+5}_{-2} for the data atoms after erasure-cooling, before ancilla-based detection (lower). This number is measured to be 0.010^{+7}_{-7} after one round of ancilla-based detection (upper). This shows that data atoms are minimally perturbed in this ancilla-based detection scheme. Error bars represent 1 \sigma confidence interval and are typically smaller than the markers. In this Letter, we realize a comprehensive toolbox for ancilla-based atom readout and loss detection, using our experimental setup consisting of individually trapped strontium atoms equipped with high-fidelity entangling gates [Fig. 1 ]. We first show how ancilla-based atom readout, when performed in a repeated fashion, enables improved detection fidelity while preserving the benefits of fast imaging and flexibility for erasure conversion Scholl et al. 2023 ; Muzi Falconi et al. 2025 ; Ma et al. 2025 . Then, we demonstrate how this ancilla-based protocol could be implemented in a coherence-preserving manner to achieve pure atom loss detection, making use of the motional omg -architecture Lis et al. 2023 ; Ma et al. 2022 ; Chen et al. 2022 adapted for {}^{88}\text{Sr} atoms (see Fig. 1 (b) and Supplemental Material SM ). We further address the heating problem