Inverse design of heterodeformations for strain soliton networks in bilayer 2D materials

Md Tusher Ahmed, Nikhil Chandra Admal · 2026

Read Inverse design of heterodeformations for strain soliton networks in bilayer 2D materials by Md Tusher Ahmed, Nikhil Chandra Admal (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-21446.txt.

Introduction

Ahmed and Admal tackle the design of strain soliton networks in bilayer two-dimensional materials. These networks shape the structure and electronic behavior of the bilayer, but the space of possible deformations is huge. They build a geometric framework that maps each deformation to a network described by line and Burgers vector pairs. Topology from the stacking fault energy landscape limits which networks can occur. The map runs both ways, so a target network can be turned back into the deformation that creates it.

Catalog record

CREATORMd Tusher Ahmed, Nikhil Chandra Admal
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE58447
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2603.21446

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Inverse design of heterodeformations for strain soliton networks in bilayer 2D materials Md Tusher Ahmed, Nikhil Chandra Admal Abstract Strain soliton networks strongly influence the structural and electronic properties of heterodeformed bilayer systems, yet their design remains challenging due to the high dimensionality of heterodeformation space and the absence of a direct map between deformation and network geometry. In this work, we introduce a geometric framework that establishes a one-to-one mapping between heterodeformations and the geometry of the strain soliton network expressed as line vector–Burgers vector pairs. The admissible networks are constrained by topology dictated by the generalized stacking fault energy landscape. We show that the moiré Bravais lattice, corresponding to a uniform heterodeformation, alone is insufficient to characterize the interface: distinct heterodeformations can share identical moiré Bravais lattices while producing different soliton networks, reflecting an inherent many-to-one mapping when only translational symmetry is considered. In contrast, the soliton network encodes the full multilattice geometry of the interface, including topology and connectivity, which are not captured by the moiré Bravais lattice alone. The proposed framework enables the direct construction of heterodeformations from target networks, providing a systematic route for inverse design of moiré interfaces beyond conventional twist-based approaches. keywords Inverse design, Heterodeformation, Strain soliton networks, Moiré patterns, Generalized stacking fault energy 1 Introduction In the era of micro- and nano-electromechanical devices, 2D materials have garnered significant attention from the scientific community due to their superior thermal, mechanical, and electronic properties 16 , 11 , 15 . Particularly, the observation of flat bands at magic angle twisted bilayer two-dimensional (2D) materials gives rise to interesting quantum properties such as quantum hall effect, Mott insulating effect, superconductivity, etc. 33 , 29 , which makes the use of heterodeformed 1 1 1 Heterodeformation is an umbrella term used to refer to relative twists and relative strains. bilayer 2D materials versatile for numerous applications 9 , 26 . A rigid twisted and/or heterostrained bilayer 2D material undergoes structural reconstruction where atoms are displaced from their positions in the rigidly heterodeformed configuration 35 , 28 . This reconstruction is mediated by the formation of an array of interface dislocations, also referred to as strain solitons 28 , 34 , 5 , 3 , 2 . These solitons are characterized by their Burgers vector and line direction 13 . In twisted bilayer graphene, they typically organize into straight triangular networks 22 , whereas heterostrained bilayers may exhibit distorted triangular 22 , 42 or even spiral networks 27 . The structure of each soliton depends on the alignment between its Burgers vector and line direction, imparting screw-like or edge-like character 12 , 44 . The geometry of the soliton network is not merely a structural detail. In continuum models of flat band physics 6 , 38 , 10 , 45 , 25 , the effective interlayer coupling is assumed to be periodic with respect to the 2D moiré Bravais lattice generated by the imposed heterodeformation. In other words, the 2D moiré Bravais lattice determines the translational symmetry of the interlayer coupling. It does not specify the point group symmetry of the interlayer coupling. Only when the moiré is viewed in its entirety, i.e., the moiré Bravais lattice along with the atoms of both layers interpreted as its basis atoms, do the internal shifts determine the point group symmetry of the interlayer coupling. We will use the term moiré lattice to refer to the entire multilattice. As an example, Figure 1 shows three distinct heterodeformed configurations of bilayer graphene that share a common 2D moiré Bravais lattice, whose primitive unit cell is shown by a white dashed parallelogram. Although the three moiré lattices have identical translational symmetries, they have distinct point group symmetries. Consequently, two heterodeformations producing identical 2D moiré Bravais lattices may nevertheless yield continuum Hamiltonians with distinct point group symmetries and band structures . Moreover, anisotropic band structure observed in distorted, heterostrained bilayer configurations can be attributed to the strain-induced distortion of the moiré lattice and the resulting modification of the moiré Brillouin zone 36 . (a) (b) (c) Figure 1: Three heterodeformations of bilayer graphene, resulting in identical 2D moiré Bravais lattices. The three configurations, however, have distinct point group symmetries. The colors represent energy per atom in [ \mathrm{eV} ]. Structural relaxation of the three configurations in Figure 1 yields distinct soliton networks that inherit the translational and point group symmetries of the moiré lattice. In addition to the band structure, the soliton network also plays an important role in superlubricity and ferroelectricity. The frictional response of a heterodeformed bilayer is determined by the mobility of interface dislocations 2 , which depends on the Burgers vector, line direction, and network connectivity. In ferroelectric systems like bilayer hBN, domain transitions under applied electric field are mediated by the deformation (bending/swirling) of interface dislocations 43 , 4 , which depends on the geometry of interface dislocations. Therefore, controlling the geometry of the network of strain solitons is critical for the design of electronic and mechanical properties of heterodeformed bilayer materials. It is well established that heterodeformation controls the characteristic size and anisotropy of moiré lattices in bilayer 2D materials. Experiments and simulations show that increasing twist angle or heterostrain modifies domain-wall width and reduces the moiré length scale 19 , 22 , 27 , while numerous theoretical studies demonstrate that the moiré lattice unit cell can be tuned continuously by adjusting the relative deformation 40 , 41 , 23 , 24 , 12 , 14 . In particular, recent works 24 , 14 treat heterodeformation as a control parameter for generating moiré lattices. However, these approaches constitute a forward-design rather than an inverse-design paradigm as their input is the imposed heterodeformation (e.g., heterostrain and/or twist), and the output that is usually emphasized is the 2D moiré Bravais lattice. Since the forward design is a many-to-one mapping—as demonstrated in Figure 1 —it does not fully establish the relationship between the moiré and heterodeformation, which is a key requirement for experiments 17 , 21 . Therefore, our goal is to develop an inverse design framework wherein the input is the target moiré—fully described by not only the Bravais lattice vectors but also the soliton network—and the output is the heterodeformation . We will show that the inverse design is a one-to-one mapping and, therefore, mathematically well-posed. A key component of our inverse design is Smith normal form (SNF) bicrystallography 1 , an algebraic tool for analyzing the bicrystallography of crystal interfaces. We first introduce the geometric framework and notation, followed by the inverse design formulation and its application to representative bilayer systems. All atomistic configurations are plotted using the Open Visualization Tool (OVITO) 37 . 2 Notation and lattice preliminaries Lowercase bold letters are used to denote vectors while uppercase bold letters are used to denote second-order tensors and matrices, unless stated otherwise. The symbol \cdot denotes the inner product of two vectors. The Cartesian coordinates of a vector \bm{x} are represented as a column matrix \bm{x}=(x_{1},\dots,x_{n})^{\rm T} , where \rm T denotes transpose. The curl of a second-order tensor \bm{T} is a tensor whose components are given by [\mathrm{curl}(\bm{T})]_{ij}=\epsilon_{ipq}T_{jq,p} . The outer product of two vectors, denoted by \bm{a}\otimes\bm{b} , is a tensor with components [\bm{a}\otimes\bm{b}]_{ij}=a_{i}b_{j} .

Read the complete text