Framework for Indoor Wireless Propagation Modeling through Wireless Insite ®
Arao Zau Macaia 1 , Niraj Narayan 1 , Rajeev Shukla 1 , Aniruddha Chandra 1 , Ondřej Zelený 2 , Radek Zavorka 2 , Jiri Blumenstein 2 , Aleš Prokeš 2 , Jarosław Wojtuń 3 , Jan M. Kelner 3 , Cezary Ziolkowski 3 · 2026
Read Framework for Indoor Wireless Propagation Modeling through Wireless Insite ® by Arao Zau Macaia 1 , Niraj Narayan 1 , Rajeev Shukla 1 , Aniruddha Chandra 1 , Ondřej Zelený 2 , Radek Zavorka 2 , Jiri Blumenstein 2 , Aleš Prokeš 2 , Jarosław Wojtuń 3 , Jan M. Kelner 3 , Cezary Ziolkowski 3 (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-20332.txt.
Introduction
Macaia and co-authors lay out a step-by-step framework for modeling indoor wireless signals. Reflections, diffraction, and material effects make indoor propagation hard to predict. Yet over 80% of wireless data is used indoors, so accuracy matters. Their simulations use Wireless Insite ray tracing for a full department floor. SketchUp builds the layout from field measures, and MATLAB plots channel outputs. They test several transmitter and receiver spots for cases like coverage holes.
Catalog record
| CREATOR | Arao Zau Macaia 1 , Niraj Narayan 1 , Rajeev Shukla 1 , Aniruddha Chandra 1 , Ondřej Zelený 2 , Radek Zavorka 2 , Jiri Blumenstein 2 , Aleš Prokeš 2 , Jarosław Wojtuń 3 , Jan M. Kelner 3 , Cezary Ziolkowski 3 |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 14923 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2603.20332
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Framework for Indoor Wireless Propagation Modeling through Wireless Insite ® Arao Zau Macaia 1 , Niraj Narayan 1 , Rajeev Shukla 1 , Aniruddha Chandra 1 , Ondřej Zelený 2 , Radek Zavorka 2 , Jiri Blumenstein 2 , Aleš Prokeš 2 , Jarosław Wojtuń 3 , Jan M. Kelner 3 , Cezary Ziolkowski 3 Abstract Multipaths, reflections, diffractions, and material interactions complicate indoor wireless propagation modelling. More than 80 % 80\% of wireless data is consumed indoors; hence, planning successful deployments and maximizing network performance depends on accurate propagation modelling of indoor environments. This work explains a complete framework for indoor wireless propagation modelling via ray tracing simulation in a step-by-step manner. The ray tracing simulations are conducted with Wireless Insite®, a proprietary electromagnetic propagation software, whereas SketchUp® is used at the input side for layout construction from the field measurements, and MATLAB® is used at the output side for portraying channel model parameters such as power delay profile (PDP). A whole floor of the authors’ department is modelled, and different transmitter-receiver locations were tested for possible use cases such as coverage hole prediction. I Introduction I-A What is Ray Tracing? In wireless channel modelling, ray tracing (RT) is a ray optics-inspired technique used to represent the propagation of radio waves through a given indoor or outdoor environment [ 6 , 2 ] . The way waves move from the transmitter to the receiver is examined, taking into account their interactions with objects like trees and buildings, which can cause the waves to disperse, bounce, or bend [ 13 , 7 ] . Using this approach, a three-dimensional (3D) map of the surroundings is produced by tracking the waves’ courses and illustrating how they alter as they strike various surfaces [ 12 ] . Ray tracing helps predict signal strength, interference, and coverage in complicated regions, such as built-up urban areas or highly cluttered industrial environments, where traditional models may not perform well [ 5 ] . Radio waves behave like light at higher frequency ranges, making the ray tracing-based framework more relevant in millimetre wave (mmWave) and sub-terahertz (sub-THz) bands. I-B Ray Tracing for Indoor Environments Indoor modelling is used to understand how wireless (like WiFi or phone) signals behave inside buildings. Since Global Positioning System (GPS) signals and satellite images do not work well indoors, measuring and predicting signal strength and coverage is harder. This is where ray tracing comes in. Ray tracing helps by simulating how radio waves bounce off walls, furniture, and other objects inside the building, giving us an idea of how strong the signal will be in different areas [ 9 ] . Ray tracing is also helpful in checking the accuracy of models. After taking real measurements inside the building, engineers can compare them to the ray tracing results to see if the model is correct [ 7 ] . This helps improve the models so they reflect the real world more accurately. Additionally, ray tracing is helpful for interpolation and extrapolation. Engineers can use measurements taken at a few points inside the building and then predict the signal strength in other areas without needing to measure everywhere [ 11 ] . It helps save time and effort while providing accurate signal coverage predictions. Fig. 1 : Satellite images and building photograph of the site [clockwise from left]: (a) Aerial view of National Institute of Technology (NIT) Durgapur, (b) Top view of the Electronics and Communication Engineering (ECE) department, and (c) Photograph of the ECE department building taken from south-west direction. [image courtesy: Google Earth, Google Maps] I-C Literature Survey Ray tracing is widely applied in indoor wireless propagation modelling to simulate radio wave behaviour and predict key parameters like signal strength, delay spread, and coverage holes. Authors in [ 14 ] presented an end-to-end learning architecture that combines significance sampling and differentiable Monte Carlo ray tracing. The method enables high-fidelity material editing and complex item insertion by simultaneously recovering geometry, spatially varying illumination, and photorealistic materials from a single image. Using detailed ray-tracing simulations, the article [ 10 ] describes a 28 GHz indoor dense space channel while considering settings such as train waggons and aeroplane cabins. Comparing bit error rate performance to current models, it examines route loss, shadow fading, and other factors. The authors conducted a comprehensive indoor environment characterization [ 8 ] and provided a detailed discussion on various channel parameters and channel models, the influence of building material on channel propagation, and some case studies. Fig. 2 : Layout of the 1st floor (a) Top view designed in AutoCAD and (b) Three-dimensional (3D) view designed in SketchUp. The corridor is stretched east-west, and faculty rooms are south-facing. Dimensions are in m. Fig. 3 : Four stages of the workflow [clockwise from top-left]: (a) Dimensional measurements are being taken in the classroom EC 21, (b) 3D layout is obtained in SketchUp after measurements are fed, (c) Indoor radio propagation environment layout is constructed with Wireless Insite, and (d) Channel model parameters are viewed through MATLAB. Using indoor geolocation algorithms, authors in [ 4 ] first simulated an indoor scenario using Wireless InSite and evaluated the geolocation performances. Potentials and limitations of channel characterization characterization 5 GHz using the RT tool of Wireless InSite were introduced in [ 3 ] for an indoor propagation scenario. The authors investigated the effect of distance, frequency and obstacles in line-of-sight (LOS) and non-line-of-sight (NLOS) scenarios. On the other hand, [ 1 ] applies Wireless Insite® to optimize the coverage of the WiFi network in a large office building. The authors use ray tracing to simulate different access point configurations and determine the most efficient setup. The paper provides a case study of how Wireless Insite® can be used for real-world network optimization, focusing on range optimization, hole detection and network planning in commercial spaces. The organization of the rest of the paper is as follows. Section II describes a step-by-step guide on using the RT software for indoor wireless propagation modelling. A full description of the example site model, the four main stages of the workflow, and verification methods are presented. Section III presents the methodology and results for a typical use case, coverage hole prediction. The paper finally concludes in Section IV with an indication of the future scope of the framework presented. Fig. 4 : Detailed workflow in a step-by-step manner - the top portion shows SkechUp flow, the middle layer shows the main Wireless Insite flow, and the bottom layer shows the MATLAB flow. Fig. 5 : Verification of the constructed radio propagation environment. The distance between T_{X} and R_{X} divided by the propagation speed should match the delay of the first-arriving LOS path delay. (a) (b) Fig. 6 : Ray tracing results for the same environment with two different types of material: [left] With all wooden furniture, and [right] With metal coating on furniture. II Workflow with Wireless Insite II-A Site Description The example site that is modelled with the RT framework is the 1st floor of the Electronics and Communication Engineering (ECE) department of the National Institute of Technology (NIT) Durgapur, an institute of national importance situated in the eastern side of India in the state of