Time-delay estimation using the Wigner-Ville distribution
L. de A. Gurgel, J. M. de Araújo, L. D. Machado, P. D. S. de Lima · 2026
Read Time-delay estimation using the Wigner-Ville distribution by L. de A. Gurgel, J. M. de Araújo, L. D. Machado, P. D. S. de Lima (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-20058.txt.
Introduction
Gurgel and co-authors estimate time delays between signals with the Wigner-Ville distribution. Common tools build cross spectra from linear time frequency maps like wavelet transforms. Those maps blur frequency detail and need extra smoothing to act as similarity measures. The quadratic Wigner-Ville form reaches near the joint resolution limit. It also gives a proper measure of likeness between signals. On two wave physics test cases, it gave sharper delay estimates. The gains were largest in the most energetic frequency bands.
Catalog record
| CREATOR | L. de A. Gurgel, J. M. de Araújo, L. D. Machado, P. D. S. de Lima |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 26689 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2603.20058
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Time-delay estimation using the Wigner-Ville distribution L. de A. Gurgel, J. M. de Araújo, L. D. Machado, P. D. S. de Lima Abstract Accurately calculating time delays between signals is pivotal in many modern physics applications. One approach to estimating these delays is computing the cross-spectrum in the time–frequency domain. Linear time-frequency representations, such as the continuous wavelet transform (CWT), are widely used to construct these cross-spectra. However, it is well known that the frequency resolution is inherently limited by the localized nature of the convolving wavelet. Moreover, the functional form of the CWT cross-spectrum is not a proper correlation measure and typically requires post-processing smoothing. Conversely, quadratic representations achieve joint time–frequency resolution approaching the Gabor–Heisenberg limit while also providing an adequate measure of similarity between the signals. Motivated by these advantages, we propose a time-delay estimation method based on the Wigner-Ville Distribution (WVD). Considering nonstationary signals arising from two typical wave-physics scenarios, we show that the WVD yields more accurate time-delay estimates with lower uncertainty, particularly in the most energetic frequency bands. I Introduction Time-delay estimation is a technique for determining differences in the arrival times of signals recorded by different sensors, and it is essential across diverse scientific areas 11 ; 23 ; 5 ; 61 ; 17 . For example, it is used as a proxy to detect and denoise gravitational wave signals from space-based detectors 14 ; 26 ; 4 , or to estimate fractal dimensions from chaotic time series 60 . In dynamical systems, time-delays arise whenever a phenomenon involves transport over a finite distance at finite velocity, leading to an inherent temporal lag between cause and effect 24 ; 12 ; 38 . In seismology, the time delay between seismic signals encodes information about the Earth’s medium and can be used to infer changes in its heterogeneity 32 ; 6 . Methods of inverse modeling based on time delay computations are known to mitigate cycle-skipping caused by phase mismatch 51 ; 53 , and yield more accurate estimates of the medium’s physical properties when weaker prior information is available 29 ; 57 ; 47 . Various linear methods for time-delay estimation have been proposed in the literature. The stretching method 28 ; 44 ; 19 , which assumes that the delay between two signals can be inferred by a series of linear contractions/dilations in one of them. This feature is limited in its applicability over extended time intervals, where nonlinear effects due to media heterogeneity are unavoidable. Another method consists of maximizing the cross-correlation over windowed versions of both signals, either in the time or frequency domain 18 . In the latter case, it is also referred to as coherence analysis 30 , since the correct time delay is the one that maximizes the coherence between the signals. This approach is sensitive to the window length, and an inappropriate choice may hinder the detection of cycle-skipping effects. To overcome the window limitation, dynamic time warping (DTW) 20 ; 35 has been introduced as an alternative to time-delay estimation. DTW is a nonlinear method that does not assume homogeneity of the underlying medium and can provide accurate time delays even at low signal-to-noise ratios. However, it still fails to provide a complete time-frequency time-delay map, as it retains only temporal information. Moreover, due to the absence of spectral content, time delays estimated via DTW lack key details for physical interpretation, thereby limiting their applicability in wave-physical analysis. Therefore, DTW does not inherently respect physical constraints and can eventually align two unrelated segments. Cross-spectral methods in the time-frequency domain 54 ; 33 have emerged as an alternative tool for obtaining more informative time delays between nonstationary signals. Since nonstationarity is ubiquitous in wave phenomena (multiple scattering, frequency-dependent attenuation, and mode conversion), time–frequency analysis is appropriate for extracting signal features that may vary over time. Most of these methods are formulated as linear time-frequency representations, in which the classical Fourier transform is applied along the frequency axis, considering different time windows. Another class of time-frequency methods relies on quadratic representations, which are based on the signal’s energy distribution in the time-frequency plane. Such representations provide a theoretical resolution superior to that of linear representations in the Gabor-Heisenberg limit. In this context, the Wigner-Ville distribution (WVD) is the most commonly used quadratic representation. The WVD arises in quantum mechanics as a quasiprobability density function for representing particles in phase space 55 . Although it has been used as a time-frequency tool in wave dynamics problems 58 ; 43 ; 9 ; 10 , it has never been employed to estimate time delays in nonstationary waves. Motivated by the mathematical properties of these representations, we investigate the WVD’s ability to estimate time delays from time-frequency-dependent cross-spectral computation. The remainder of this paper is organized as follows. We describe a general method for time-delay estimation based on time-frequency representations in Sec. II , and we also review the mathematical and numerical aspects regarding the continuous wavelet transform (CWT) and the WVD. Sec. III is devoted to comparing the accuracy of these methods in estimating time delays in two numerical examples concerning wave propagation in complex media, followed by our conclusions in Sec. IV . II Time-Frequency Time-Delay Estimation In this section, we describe the mathematical aspects of the CWT and WVD and their application to time-delay estimation. We assume that the time series of interest are always square-integrable, that is, x(t),y(t)\in\mathcal{L}^{2}(\mathbb{R}) . II.1 Continuous Wavelet Transform (CWT) Since linear time-frequency representations are not unique, different mappings have been proposed in the literature. While the Gabor Transform 16 ; 8 fixes the window size, the continuous wavelet transform (CWT) provides a better multi-resolution tool by changing the window size along the time-frequency domain 1 ; 3 ; 49 . This adaptive resolution is achieved by convolving the signal with daughter wavelets \psi_{a}(t)=\psi\left(t/a\right)/\sqrt{a} . These wavelets are time-localized zero average functions, constructed from a mother wavelet \psi(t) and deformed by a positive dilatation parameter a . The dilation factor is used to increase the frequency (time) resolution at the price of decreasing the time (frequency) resolution, such that the Gabor-Heisenberg uncertainty relation is respected ( 31 ) . With that in mind, the CWT is defined as: \text{CWT}_{x}(t,a)=\frac{1}{\sqrt{a}}\int_{-\infty}^{\infty}x(\tau)\psi^{*}((\tau-t)/a)\,d\tau\,, (1) where the factor \sqrt{a} ensures that the energy is conserved between wavelets, regardless of the value of a . The maps computed from Eq. ( 1 ) can be converted to the time-frequency domain using the pseudo-frequency representation ( 42 ) . In our analysis, we consider the complex Morlet function 36 ; 37 as the mother wavelet \psi(t)=\pi^{-1/4}e^{-i\omega_{0}t}e^{-t^{2}/2} , where \omega_{0} is the central frequency used to vary the frequency localization. Since the CWT given in Eq. ( 1 ) stands as a complex representation of the signal, mismatches between x(t) and y(t) lead to the following time–frequency phase shift: \Phi_{xy}^{\text{CWT}}(t,f)=\arg{\left(\widehat{\text{CWT}_{xy}}(t,f)\right)}\,, (2) where the normalized cross-spectrum \widehat{\text{CWT}_{xy}}(t,f) is defined as: \widehat{\text{CWT}_{xy}}(t,f)=\frac{\text{CWT}_{xy}(t,f)}{\sqrt{|\text{CWT}_{xx}(t,f)|^{2}|\text{CWT}_{yy}(t,f)|^{2}}}\,, (3) with \text{CWT}_{xy}(t,f)=\text{CWT}_{x}(t,f)\text{CWT}^{*}_{y}(t,f) . We mention that Eq. ( 3 ) can also be used to compute the time-frequency coherence in the CWT framework. However, since it is not a proper coherence measure 27 ; 48 ; 25 ; 39 , a smoothing operator in both time and frequency domains is