Symmetric mixtures in slit-like pores with selective walls
A. Patrykiejew · 2026
Read Symmetric mixtures in slit-like pores with selective walls by A. Patrykiejew (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-20023.txt.
Introduction
Patrykiejew studies symmetric mixtures trapped in narrow slit pores with selective walls. In bulk, these mixtures resist phase separation despite strong non-additivity. Inside a pore, the walls change the picture. If the walls prefer one component only weakly, the pore fills in one condensation step. Stronger preference can split filling into two steps. The first step yields a demixed liquid, and the second restores a mixed liquid. The work maps how wall selectivity and non-additivity shape this confined phase behavior.
Catalog record
| CREATOR | A. Patrykiejew |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 38845 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2603.20023
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Symmetric mixtures in slit-like pores with selective walls A. Patrykiejew Abstract Symmetric mixtures characterized by high negative geometric and energetic non-additivity do not exhibit phase separation in the bulk. However, the phase separation occurs when such mixtures are confined in slit pores with selective walls. It is demonstrated that the wall selectivity affects the pore filling. When the difference of the interaction energies between the mixture components and pore walls is lower than a certain threshold value, condensation occurs between a dilute phase and the mixed liquid. When this difference exceeds the threshold value, the pore filling may occur in two steps. The first is the condensation of a dilute phase into the demixed liquid, and the second step leads to the formation of the mixed liquid. We have elucidated the changes in the phase behavior caused by non-additivity of symmetric mixtures, and by the difference in the interaction energies of the components with pore walls. Key words: symmetric mixtures, slit pores with selective walls, demixing, Monte Carlo simulations 1 Introduction The model of symmetric mixture (SM), although very simple, is characterized by rich physics [ 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 ] . In such mixtures, the components, A and B, have the same properties and the interactions between the AA and BB pairs are identical, while the interaction between the AB pairs is different due to the energetic and/or geometric non-additivity. The interaction energy between a pair of particles, i and j , is characterized by the depth, \varepsilon_{ij} , and the range, \sigma_{ij} , of the potential well. In the case of a symmetric mixture, \varepsilon_{AA}=\varepsilon_{BB}=\varepsilon and, \sigma_{AA}=\sigma_{BB}=\sigma , while \varepsilon_{AB} and \sigma_{AB} are different, and may be defined as \varepsilon_{AB}=e\varepsilon and \sigma_{AB}=s\sigma . Thus, the parameters e and s describe the energetic and geometric non-additivity, respectively. When the symmetric mixture exhibits only energetic non-additivity, i.e., e<1 , and s=1 , the bulk mixtures were found to exhibit a demixing transition, which may occur in the solid and/or liquid phases [ 1 , 2 , 10 , 11 , 12 , 13 ] . When demixing occurs in the liquid phase, the transition may be discontinuous (first-order) or continuous (second-order) depending on the value of e and the temperature. In general, the tendency towards phase separation is enhanced when the parameter e becomes lower. On the other hand, when the mixture shows only geometric non-additivity, i.e., s\neq 1 and e=1 , only the packing effects affect the properties of the mixture, especially in the high-density region. In particular, it was demonstrated [ 9 ] that solid phases are mixed, or partially mixed, and form crystals of different structures depending on s . In the liquid phase, the AA and BB pairs are more likely to appear when s>1 , and this leads to the formation of clusters consisting of like particles, though the densities of both components remain the same. On the other hand, when s<1 , the formation of AB pairs is favored, which enhances miscibility. When the parameters, e and s , are both lower than unity, the situation becomes more complex, since low values of e favor demixing, while low values of s favor mixing [ 6 , 14 ] . Competing energetic and geometric non-additivity causes the demixing transition in the liquid to occur only when s is larger than a certain threshold value s_{o}(e) . When s is lower than s_{o}(e) , phase separation is suppressed completely, and the phase diagrams of such mixtures become qualitatively the same as in single-component systems [ 6 , 15 ] . Thus, the vapor condenses into the mixed liquid, and the vapor-liquid transition terminates in the critical point. In such systems, the solid phase is also mixed. The behavior of SMs adsorbed in slit-like pores has been studied theoretically, using the lattice and off-lattice density functional theory [ 16 , 17 , 18 , 19 ] , and computer simulations [ 20 , 21 , 14 ] . The primary objective of those studies was to determine how geometric constraints and the interaction of fluid particles with the pore walls affect the phase separation in liquids. It should be noted that the vast majority of those studies were devoted to mixtures in which s=1 , and only the parameter e was less than unity. The effects of confinement on demixing transition in mixtures with e<1 and s\neq 1 have also been considered [ 14 , 20 ] , but mostly in systems with non-selective walls, i.e., with the same energies of interaction between the mixture components and the pore walls. The symmetric mixtures with s>1 in slit-like pores with crystalline walls of square symmetry were studied by Monte Carlo simulation [ 20 ] , and shown to exhibit the formation of condensed phases with different sequences of demixed layers, despite practically the same total densities of both components in the system. Recently, we have studied the behavior of symmetric mixtures with e=0.6 , and s>s_{o}(e) , in slit pores with non-selective walls [ 14 ] . It has been shown that geometrical constraints are of rather limited importance and lead to qualitative changes in the phase behavior only in very narrow pores. In such cases, phase separation does not occur at all, and the gas condenses into the mixed liquid up to the critical temperature of capillary condensation. In wider pores, the phase behavior was show to be qualitatively the same as in bulk systems with s>s_{o}(e) . An interesting, and as yet not studied problem, is the effect of geometric confinement on the behavior of highly non-additive symmetric mixtures, with s<s_{o}(e) , which do not exhibit a demixing transition in the bulk, and when the components interact differently with the pore walls. Such a situation may correspond to racemic mixtures placed in pores with chiral walls [ 22 ] . Our goal here is to determine whether the wall selectivity can lead to the phase separation in the confined liquid, and how this affects the phase behavior of systems characterized by different magnitudes of the parameters e and s , different pore widths, as well as different energies of interaction of the mixture components with the walls. The paper is organized as follows. The next section presents the model and the simulation method used. In section III, we present and discuss the results. The paper concludes in section IV, which contains a brief summary of our findings and final remarks. 2 The model and simulation methods We consider mixtures, in which the pair of particles, i and j , interact via the (12,6) Lennard-Jones potential u_{ij}(r)=\left\{\begin{array}[]{ll}4\varepsilon_{ij}\left[(\sigma_{ij}/r)^{12}-(\sigma_{ij}/r)^{6}\right],&r\leqslant r_{\rm max},\\ 0,&r>r_{\rm max}.\end{array}\right. (2.1) In a symmetric mixture, \sigma_{AA}=\sigma_{BB}=\sigma and \varepsilon_{AA}=\varepsilon_{BB}=\varepsilon , while \sigma_{AB} and \varepsilon_{AB} are different and given by \sigma_{AB}=s\sigma and \varepsilon_{AB}=e\varepsilon . The potential is cut at the distance r_{\rm max}=3\sigma , and \sigma and \varepsilon are taken as the units of length and energy, respectively. The interaction of particles with the pore walls is modelled with the potential v_{i}(z)=\varepsilon_{gs,i}\left[\left(\frac{\sigma}{z}\right)^{9}-\left(\frac{\sigma}{z}\right)^{3}+\left(\frac{\sigma}{H-z}\right)^{9}-\left(\frac{\sigma}{H-z}\right)^{3}\right],\quad\mbox{with}\,\,i=A\,\mbox{or}\,B, (2.2) where H is the pore width. In this work, we considered the systems with different \varepsilon_{gs,A} and \varepsilon_{gs,B} , and assumed that