Modeling subgrid scale production rates on complex meshes using graph neural networks

Priyabrat Dash, Mathis Bode, Konduri Aditya, [10pt] Department of Computational and Data Sciences, Indian Institute of Science, Bengaluru, 560012, KA, India, [-5pt] Jülich Supercomputing Centre, Forschungszentrum Jülich GmbH, Jülich, 52425, NRW, Germany [-5pt] · 2026

Read Modeling subgrid scale production rates on complex meshes using graph neural networks by Priyabrat Dash, Mathis Bode, Konduri Aditya, [10pt] Department of Computational and Data Sciences, Indian Institute of Science, Bengaluru, 560012, KA, India, [-5pt] Jülich Supercomputing Centre, Forschungszentrum Jülich GmbH, Jülich, 52425, NRW, Germany [-5pt] (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-19841.txt.

Introduction

Dash, Bode, and Aditya build a graph neural network for large-eddy simulation of turbulent flames. Such simulations need models for filtered chemical production rates that the resolved fields miss. Their network reads filtered mass fractions and temperature on uneven meshes. Training data come from direct simulations of hydrogen-methane jet flames. The model trains on two fuel blends and is tested on an unseen third blend. It beats an unclosed baseline and a convolutional network. It also holds up at new filter widths without retraining.

Catalog record

CREATORPriyabrat Dash, Mathis Bode, Konduri Aditya, [10pt] Department of Computational and Data Sciences, Indian Institute of Science, Bengaluru, 560012, KA, India, [-5pt] Jülich Supercomputing Centre, Forschungszentrum Jülich GmbH, Jülich, 52425, NRW, Germany [-5pt]
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE40422
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2603.19841

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Modeling subgrid scale production rates on complex meshes using graph neural networks Priyabrat Dash, Mathis Bode, Konduri Aditya, [10pt] Department of Computational and Data Sciences, Indian Institute of Science, Bengaluru, 560012, KA, India, [-5pt] Jülich Supercomputing Centre, Forschungszentrum Jülich GmbH, Jülich, 52425, NRW, Germany [-5pt] Abstract Large-eddy simulations (LES) require closures for filtered production rates because the resolved fields do not contain all correlations that govern chemical source terms. We develop a graph neural network (GNN) that predicts filtered species production rates on non-uniform meshes from inputs of filtered mass fractions and temperature. Direct numerical simulations of turbulent premixed hydrogen-methane jet flames with hydrogen fractions of 10%, 50%, and 80% provide the dataset. All fields are Favre filtered with the filter width matched to the operating mesh, and learning is performed on subdomain graphs constructed from mesh-point connectivity. A compact set of reactants, intermediates, and products is used, and their filtered production rates form the targets. The model is trained on 10% and 80% blends and evaluated on the unseen 50% blend to test cross-composition generalization. The GNN is compared against an unclosed reference that evaluates rates at the filtered state, and a convolutional neural network baseline that requires remeshing. Across in-distribution and out-of-distribution cases, the GNN yields lower errors and closer statistical agreement with the reference data. Furthermore, the model demonstrates robust generalization across varying filter widths without retraining, maintaining bounded errors at coarser spatial resolutions. A backward facing step configuration further confirms prediction efficacy on a practically relevant geometry. These results highlight the capability of GNNs as robust data-driven closure models for LES on complex meshes. Novelty and significance statement This study introduces a mesh-native graph neural network (GNN) closure for predicting filtered species production rates directly on non-uniform meshes. By operating on discrete mesh connectivity, this framework avoids interpolation and remeshing steps required by conventional convolutional neural networks (CNNs). The model learns the mapping between filtered species mass fractions, temperature, and production rates using direct numerical simulation data from premixed \text{H}{\vphantom{\text{X}}}_{\smash[t]{\text{2}}} / \text{CH}{\vphantom{\text{X}}}_{\smash[t]{\text{4}}} jet flames filtered to LES resolution. Across both in-distribution and out-of-distribution a priori evaluations, including an unseen intermediate fuel blend, the GNN achieves lower prediction errors and closer joint probability agreement with the reference compared to a matched-complexity CNN and a no-model baseline. This approach further demonstrates robustness to spatial resolution variations, maintaining accurate predictions across coarser filter widths without retraining. By enabling subgrid chemistry closure directly on solver meshes, this interpolation-free framework provides a scalable pathway for data-driven finite-rate chemistry modeling in LES of practical combustors. Keywords: turbulent reacting flows; data-driven combustion modeling; subgrid chemistry; graph neural networks *Corresponding author. 1 Introduction Large-eddy simulations (LES) are widely used in studies of turbulent combustion because they offer a practical balance between accuracy and computational cost. Such calculations resolve the energy-containing large-scale motions and relevant unsteady structures while modeling the small scales, enabling simulations of realistic configurations that are prohibitive with direct numerical simulations (DNS). In LES, the Favre-filtered species transport equations are advanced in time, and accurate representation of the chemical source term is difficult because reactions occur in thin fronts that are typically smaller than the mesh size. The filtered equations therefore contain source terms that depend on correlations between unresolved thermochemical fluctuations and the resolved state. At subgrid scales, turbulence and chemistry interact in a coupled manner that redistributes scalars, modifies the local temperature, and potentially alters reaction pathways, so the resolved fields alone do not determine the filtered reaction rates. Consequently, the filtered production rate is not equal to the reaction rate evaluated at the filtered thermochemical state, i.e., \widetilde{\dot{\omega}}_{k}\neq\dot{\omega}_{k}(\tilde{\phi}) . A closure is therefore required to quantify the effect of these subgrid (or subfilter) correlations, and the predictive capability of LES depends strongly on the quality of this closure. Since operating conditions, combustion regimes, and transported scalars vary across applications, no single closure performs consistently across configurations. Conventional closure models address this problem through chemistry tabulation or statistical descriptions of unresolved fluctuations. Flamelet-based approaches [ 24 ] , including flamelet/progress-variable formulations [ 26 ] and flamelet-generated manifolds [ 31 ] , reconstruct reaction rates by parameterizing the local thermochemical state using a reduced set of control variables [ 32 , 14 ] . In premixed combustion, flame surface density (FSD) [ 30 ] and artificially thickened flame (TFLES) [ 9 ] models are frequently employed to resolve subgrid-scale flame-turbulence interactions. These formulations typically rely on algebraic wrinkling factor closures [ 7 ] to account for turbulence-induced flame surface enhancement. Alternative formulations rely on statistical descriptions of subgrid fluctuations. Conditional moment closure [ 6 ] and transported probability density function methods [ 28 ] model the joint statistics of thermochemical variables to compute filtered reaction rates. Other finite-rate chemistry closures, such as the partially stirred reactor (PaSR) [ 20 ] and eddy dissipation concept (EDC) [ 23 ] models, represent subgrid mixing and reactions through local reactor analogies and modeled turbulence timescales. Hybrid parameterizations [ 16 ] combining mixture fraction, progress variables, and scalar dissipation rates improve tabulation accuracy across different combustion regimes. While these methods remain widely used in practical simulations, their predictive capability deteriorates when the assumed flame structure, reduced thermochemical parameterization, or modeled scalar statistics fail to represent local turbulence-chemistry interactions. Furthermore, classical closures estimate filtered reaction rates primarily from the local thermochemical state. They incorporate spatial correlations present in the resolved flow field only indirectly through modeled quantities such as the scalar dissipation rate or wrinkling factors. Recent works have explored data-driven closures for turbulent combustion using neural networks trained on DNS fields filtered to LES resolutions. First-generation data-driven closures employed multi-layer perceptrons to approximate filtered reaction rates from local thermochemical scalars, providing a direct mapping between the resolved state and subgrid chemistry [ 29 , 27 ] . To embed established physics into these data-driven predictions, parallel efforts have developed hybrid frameworks that augment classical closures with machine learning, such as using neural networks to dynamically model subgrid variances for presumed PDF methods [ 12 ] . While these pointwise and hybrid models demonstrate encouraging a priori performance, they process each computational node independently, thereby incorporating spatial correlations in the resolved field only indirectly. To address this limitation, convolutional neural networks (CNNs) have been introduced to exploit spatial structure within filtered DNS data. Convolution-based architectures have shown strong performance in a range of reacting and non-reacting flow applications, reporting high a priori accuracy for predicting filtered reaction rates and subgrid flame surface wrinkling [ 18 , 21 , 2 ] . However, standard CNNs are formulated exclusively for structured uniform meshes where convolution operators assume regular grid connectivity. Practical combustor simulations on non-uniform or unstructured meshes therefore require field interpolation or remeshing, which can distort the thermochemical structure and introduce additional errors in predicted filtered production rates of species. Graph neural networks (GNNs) overcome this topological limitation by learning operators directly on complex computational meshes [ 5 ] . By performing localized message passing along the edges of a graph that maps the exact discrete connectivity, GNNs inherently account for varying mesh spacing and irregular topology without requiring flow-field interpolation. This mesh-native capability has driven the recent adoption of GNNs across fluid mechanics, including data-driven prediction

Read the complete text