Model Order Reduction of Cerebrovascular Hemodynamics Using POD–Galerkin and Reservoir Computing-based Approach

Rahul Halder, Arash Hajisharifi, Kabir Bakhshaei, Gianluigi Rozza · 2026

Read Model Order Reduction of Cerebrovascular Hemodynamics Using POD–Galerkin and Reservoir Computing-based Approach by Rahul Halder, Arash Hajisharifi, Kabir Bakhshaei, Gianluigi Rozza (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-18837.txt.

Introduction

Halder, Hajisharifi, Bakhshaei, and Rozza shrink brain blood flow simulations with reduced order models. Full 3D flow runs on an idealized basilar artery split are costly. Proper orthogonal decomposition first compresses flow snapshots into a small latent space. A POD-Galerkin model projects the Navier-Stokes equations onto that basis. A rival POD-reservoir model learns coefficient dynamics from data with a recurrent net. A rich training signal with many harmonics speeds learning. Both models run 100 to 1,000 times faster than full runs while tracking wall shear stress well.

Catalog record

CREATORRahul Halder, Arash Hajisharifi, Kabir Bakhshaei, Gianluigi Rozza
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE59842
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2603.18837

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Model Order Reduction of Cerebrovascular Hemodynamics Using POD–Galerkin and Reservoir Computing-based Approach Rahul Halder, Arash Hajisharifi, Kabir Bakhshaei, Gianluigi Rozza Abstract We investigate model order reduction (MOR) strategies for simulating unsteady hemodynamics within cerebrovascular systems, contrasting a physics-based intrusive approach with a data-driven non-intrusive framework. High-fidelity 3D Computational Fluid Dynamics (CFD) snapshots of an idealised basilar artery bifurcation are first compressed into a low-dimensional latent space using Proper Orthogonal Decomposition (POD). We evaluate the performance of a POD–Galerkin (POD–G) model, which projects the Navier–Stokes equations onto the reduced basis, against a POD–Reservoir Computing (POD–RC) model that learns the temporal evolution of coefficients through a recurrent architecture. In the present work, the introduction of a multi-harmonic and multi-amplitude training signal eliminates the requirement of multiple training signals with different amplitudes and frequencies, and thereby expedites the training process. Both methodologies achieve computational speed-ups on the order of 10 2 10^{2} to 10 3 10^{3} compared to full-order simulations, highlighting their potential as robust, efficient surrogates for real-time and accurate prediction of crucial flow properties such as wall shear stress (WSS), even adjacent to the bifurcation zones. Keywords: ; Reduced-order modelling (ROM); POD–Galerkin projection; Reservoir computing (RC); Cerebrovascular hemodynamics; Computational fluid dynamics (CFD); Hemodynamic simulations. 1 Introduction Cerebrovascular flow simulations are frequently used in the study of intracranial aneurysms and ischemic stroke, as local hemodynamic quantities are closely linked to disease progression and rupture mechanisms [ 41 , 7 , 28 ] . In parallel, such simulations are also widely employed to study flow distribution and hemodynamic balance in cerebrovascular networks [ 8 ] . In practice, three-dimensional Computational Fluid Dynamics (CFD) models have been extensively used to resolve quantities such as wall shear stress (WSS) and complex flow structures that cannot be accessed through simplified analytical descriptions [ 8 ] . In many applications, resolving fine-scale flow structures and multiphase interactions requires fully three-dimensional CFD simulations, as these features cannot be reliably captured by reduced or averaged models. This is the case, for example, in interface-resolved DNS of turbulent multiphase flows where the analysis relies on detailed information about flow topology and interfacial dynamics [ 16 , 17 ] . Despite the physical insight they provide, the computational cost of such simulations makes them impractical for extensive parametric studies or time-sensitive applications. Simplified lumped-parameter (0D) and one-dimensional network models are able to reproduce global flow rates and flow splits at very low computational cost [ 8 ] . However, by construction, these models do not provide spatially resolved information and are therefore not suitable for the analysis of local hemodynamic quantities. Their limitation is that they do not resolve the three-dimensional velocity and pressure fields, and therefore cannot be used to compute local indicators (e.g., WSS) with the required fidelity. Reduced-order models are typically introduced at this stage to reduce the cost of 3D CFD while preserving the main spatio-temporal features of the solution [ 8 , 26 , 33 , 2 ] . A classical route to reduced modeling in fluid dynamics relies on projection-based techniques. Proper Orthogonal Decomposition (POD) is widely used to extract a small number of spatial modes that capture most of the energy contained in high-fidelity flow data [ 4 , 23 , 25 , 5 , 42 ] . For flow regimes dominated by strong nonlinear effects or characterized by a slow Kolmogorov n -width decay, linear subspace approximations based on POD may provide limited compression efficiency. As a result, nonlinear manifold-based reduced-order models, often constructed using deep learning architectures such as convolutional autoencoders, have been proposed as an alternative [ 34 ] . Projecting the Navier–Stokes equations onto the reduced basis leads to a POD–Galerkin (POD–G) system that can capture the essential unsteady dynamics of the flow using a relatively small number of degrees of freedom [ 42 , 29 , 39 ] . Within this context, stabilized projection-based reduced-order models for incompressible flows have been widely studied in finite-volume settings, with particular attention devoted to pressure stabilization techniques and the enforcement of inf–sup consistency in order to obtain reliable reduced dynamics in unsteady regimes [ 39 ] . A notable advantage of these intrusive approaches is their direct connection to the governing equations, which allows the underlying physical structure of the problem to be preserved. Nevertheless, purely projection-based ROMs may encounter difficulties when applied beyond their calibration range, particularly in the presence of strong nonlinear effects. Under these conditions, standard Galerkin formulations may experience solution drift or a gradual accumulation of truncation errors, a behavior that has prompted the investigation of more robust reduced-order modeling approaches [ 26 ] . In addition, the intrusive character of these methods necessitates direct access to the fully discretized equations and solver internals, which can pose practical difficulties when working with commercial solvers or large-scale, tightly coupled simulation workflows [ 4 ] . A different strand of research moves away from equation projection altogether and instead focuses on data-driven modeling. In recent years, machine learning (ML) has been widely explored as a non-intrusive surrogate for fluid dynamics problems, especially in settings where repeated high-fidelity simulations become computationally expensive [ 10 , 36 , 6 , 27 , 32 ] . Non-intrusive POD-based reduced-order models are commonly constructed by coupling the POD representation with data-driven regression or recurrent architectures for the evolution of the reduced coefficients. Such approaches have been applied to particle-laden flows [ 18 , 14 ] , conjugate heat transfer problems [ 15 ] , and mesoscale atmospheric dynamics [ 12 ] . Since no explicit reduced governing equations are derived, these methods can be implemented without direct access to the full solver, which has contributed to their use in a range of complex flow applications. At the same time, hybrid reduced-order modeling strategies have been proposed that sit between purely data-driven methods and classical projection-based ROMs. In these frameworks, physically motivated reduced formulations are retained, while data-driven closure models are introduced to represent unresolved energy transfer mechanisms. This combination has been shown to improve predictive accuracy compared with either purely data-driven or purely projection-based approaches [ 21 ] . Hybrid reduced-order modeling strategies have been proposed that sit between purely data-driven methods and classical projection-based ROMs, where intrusive formulations are complemented by data-driven closures to model unresolved dynamics and improve robustness and accuracy [ 35 ] . Within this context, ML-augmented ROMs have received particular attention. Here, ML components are used to capture neglected dynamics or to improve numerical stability. As an example, MacRaild et al. [ 26 ] combined POD with neural networks for aneurysm flow simulations and reported substantial computational speed-ups. Beyond standard forward simulations, stochastic and data-driven approaches have also found use in inverse problems, for instance in the estimation of parameters or boundary conditions in cardiovascular flow models [ 1 ] . In this setting, the temporal evolution of the flow is inferred directly from pre-computed solution data. Reservoir Computing (RC), a particular class of recurrent neural network, has shown promising results for chaotic and strongly unsteady systems [ 31 , 24 , 30 , 13 ] . In a different application domain, a defining feature of RC is that the nonlinear reservoir is kept fixed, and only a linear

Read the complete text