Nb 3 Sn Films Exhibiting Continuous Supercurrent Across a Diffusion Bonded Seam Publication type: Paper
Andre Juliao 1∗ \orcid 0000-0003-4350-9977, Wenura Withanage 2 \orcid 0000-0003-1350-9423, Nikolya Cadavid 1,3, Anatolii Polyanskii 1 and Lance D Cooley 1 \orcid 0000-0003-3488-2980 · 2026
Read Nb 3 Sn Films Exhibiting Continuous Supercurrent Across a Diffusion Bonded Seam Publication type: Paper by Andre Juliao 1∗ \orcid 0000-0003-4350-9977, Wenura Withanage 2 \orcid 0000-0003-1350-9423, Nikolya Cadavid 1,3, Anatolii Polyanskii 1 and Lance D Cooley 1 \orcid 0000-0003-3488-2980 (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-18351.txt.
Introduction
Juliao and co-authors show Nb3Sn films carrying continuous supercurrent across a diffusion bonded seam. Bronze pairs were joined, then coated with niobium by sputtering near 715 degrees Celsius. Conversion to Nb3Sn and diffusion bonding happened in the same heating step. Magneto-optical imaging at 9 K shows supercurrent flows freely across seams in several samples. A pre-coating variant gave weaker seam coverage than the hot bronze approach.
Catalog record
| CREATOR | Andre Juliao 1∗ \orcid 0000-0003-4350-9977, Wenura Withanage 2 \orcid 0000-0003-1350-9423, Nikolya Cadavid 1,3, Anatolii Polyanskii 1 and Lance D Cooley 1 \orcid 0000-0003-3488-2980 |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 33387 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2603.18351
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Nb 3 Sn Films Exhibiting Continuous Supercurrent Across a Diffusion Bonded Seam Publication type: Paper Andre Juliao 1∗ \orcid 0000-0003-4350-9977, Wenura Withanage 2 \orcid 0000-0003-1350-9423, Nikolya Cadavid 1,3, Anatolii Polyanskii 1 and Lance D Cooley 1 \orcid 0000-0003-3488-2980 Abstract Multiple pairs of bronze pieces were joined along a common seam and then exposed to Nb vapor via sputter deposition during heating at ∼ \sim 715 °C 715\text{\,}\mathrm{\SIUnitSymbolCelsius} to form a diffusion bond between the pieces. Polishing and alignment of the pieces created smooth surfaces normal to the Nb flux with seams perpendicular to the surface (i.e. parallel to the Nb flux). Conversion of Nb to Nb 3 Sn took place simultaneously with diffusion bonding, resulting in Nb 3 Sn thin films that coated bronze surfaces and spanned seams with uniform thickness. Characterization of superconducting properties via magneto-optical imaging suggests that supercurrent flows freely across the seam in several examples when cooled to 9 K 9\text{\,}\mathrm{K} and shielding or trapping low magnetic field. Modification of the process to coat the pieces with Nb prior to diffusion bonding and Nb 3 Sn formation resulted in varying degrees of seam coverage by the resultant Nb 3 Sn films. The pre-coating method did not produce any example with quality comparable to the examples obtained by the hot bronze approach. This work could enable new approaches to joining Nb 3 Sn materials in magnet conductor and RF cavity applications. keywords Nb 3 Sn, thin films, joint, superconducting radio frequency cavity, bronze route 1 Introduction Joints are an essential component of superconducting technologies. High-field nuclear magnetic resonance (NMR) magnets depend on various configurations to form persistent joints between magnet conductors, including spot welding, diffusion bonding, pressure contacts, and use of intermediate superconductors such as solder [ 24 , 30 , 4 , 18 , 27 ] . For intermetallic superconductors such as Nb 3 Sn, spot welding, pressure contacts, and diffusion bonding are not practical, and joints are presently made using a secondary superconducting material and locating the joined region away from high magnetic field [ 4 ] . Superconducting radio-frequency (SRF) cavities are also made by joining components. Most cavities are constructed by welding Nb pieces as reviewed in [ 26 ] , which creates a pristine connection that accommodates RF currents operating at a significant fraction of the depairing current. The only present alternative to welding is to use seamless technologies [ 25 ] or coatings, such as the Nb coatings applied to Cu for the Large Electron-Positron Collider [ 2 , 5 ] . Research and industry needs have progressed to emphasize Nb 3 Sn coatings as the present state of the art [ 22 , 9 , 6 ] . The primary method of cavity scale Nb 3 Sn coatings has been mainly limited to the vapor diffusion technique, where Sn vapor is reacted with a bulk Nb cavity [ 22 ] . This route achieves quality factor high enough to consider operation of large scientific facilities with increased economy, as well as enable commercial operations with cryocoolers [ 9 , 6 , 28 ] . As with many emerging technologies, connections between macroscopic processing and details at the micro-scale that limit performance are still emerging, see for example [ 22 ] and [ 15 ] which discuss different states of development separated by nearly a decade. Many groups are directing effort to solve materials challenges connected with Nb 3 Sn SRF cavities that do not need reaction temperatures near or above the melting point of copper, 1085\text{\,}\mathrm{\SIUnitSymbolCelsius} , where Sn-vapor methods are carried out. Our group is one of several that are considering bronze as both a base material onto which Nb is deposited [ 32 , 14 , 34 , 23 ] and a material covering Nb that is removed after the reaction is complete [ 14 , 16 , 17 ] . Direct deposition from a Nb 3 Sn source [ 13 ] and formation of Nb 3 Sn via chemical vapor deposition [ 11 ] are also promising routes. Effort in non-superconducting RF cavities for linear accelerators and astronomic detectors relies upon forming the cavity body as separate pieces, which are joined after intensive material preparation and inspection steps [ 1 , 12 , 19 , 21 ] . These “clamshell” approaches align seams with RF current flow in the primary cavity mode to reduce losses and flux admission at the seam. Clamshell approaches for SRF cavities have attractive features such as accommodation of line-of-sight deposition methods and direct inspection and feedback from the cavity surface during processing. In this article, we extend previous work discussed in [ 32 ] that explored formation of Nb 3 Sn with the assistance of bronze (Cu-15wt.%Sn). We investigate whether a continuous Nb 3 Sn layer can be created across the seam between bronze pieces using synthesis routes in the prior work. We compare a novel Nb 3 Sn growth technique, the “hot bronze” method, with traditional post-reaction approaches to coat two joined bronze pieces. The hot bronze method applies Nb via magnetron sputtering onto a Cu-15wt.%Sn bronze substrate held at \sim 715\text{\,}\mathrm{\SIUnitSymbolCelsius} to facilitate instantaneous formation of Nb 3 Sn. This method was applied decades ago to form very small grains of Nb 3 Sn for flux-pinning studies [ 7 ] . We present extensive analyses of the microstructure and microchemistry resulting from the different processing approaches. In addition to checking the film morphology, we examined the superconducting properties using magneto-optical imaging (MOI), which is exquisitely sensitive to blockage of supercurrent by defects and boundaries. MOI characterizations gave a clear indication of whether the seam location might have adverse impact on applications such as detectors. 2 Experimental detail In this work, we used Cu-15wt.%Sn (Cu-9at.%Sn bronze, a high Sn \alpha -bronze phase, in reference to the Cu-Sn phase diagram) as substrate materials. As explained in more detail in our previous work [ 32 ] , this bronze substrate was prepared at the Ames Laboratory. Blocks of each material with approximate dimensions 8\text{\times}4\text{\times}5\text{\,}\mathrm{mm} were prepared as shown in Fig. 1 (a). Pairs of blocks were then drilled with alignment holes to facilitate clamping with stainless steel screws. Figure 1: Schematic (a) shows a diagram of one bronze piece used in this experiment. The block contains one clear and one tapped hole for bolting. The faces that were polished are also identified. In photo (b), two-block assemblies are shown bolted together. Schematic (c) illustrates how Nb deposition was applied to two bolted pieces forming a joint. Not shown are alternative methods where Nb was deposited on individual blocks before bolting them together. Two faces of each block were polished to a mirror finish. One of these faces was pressed against an equivalent polished face of the second block in the pair; this is called the joint face. The other face became the substrate for Nb deposition and Nb 3 Sn formation; this is called the substrate face. These faces are illustrated in Fig. 1 (a). Fig. 1 (b) shows assembled, unpolished block pairs with clamping screws. The joint faces were clamped together and the clamped assembly was subsequently polished to produce a mirror finish for the substrate face as illustrated in Fig. 1