Quantifying resonant drive in resistive perturbed tokamak equilibria Journal: \NF
M. Pharr, N.C. Logan, C. Paz-Soldan, J.-K. Park · 2026
Read Quantifying resonant drive in resistive perturbed tokamak equilibria Journal: \NF by M. Pharr, N.C. Logan, C. Paz-Soldan, J.-K. Park (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-18267.txt.
Introduction
Pharr and co-authors quantify resonant drive in resistive perturbed tokamak equilibria. Two common metrics, one for shielding current and one for penetrated field, had no known relation. With a resistive MHD inner layer in GPEC, the penetrated field scales as S to the minus two thirds. Both metrics pick closely similar dominant coupling modes in the same model. Resistive physics shifts that spectrum to lower mode numbers in a low-rotation ITER case.
Catalog record
| CREATOR | M. Pharr, N.C. Logan, C. Paz-Soldan, J.-K. Park |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 40979 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2603.18267
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Quantifying resonant drive in resistive perturbed tokamak equilibria Journal: \NF M. Pharr, N.C. Logan, C. Paz-Soldan, J.-K. Park Abstract Resonant drive in tokamaks is routinely quantified using a variety of different metrics that target different aspects of a resonant response to an external perturbation. Two of the most direct metrics, Δ m n \Delta_{mn} and b p e n b_{pen} , are widely used but their relative behavior was previously uncharacterized. This work examines how these metrics representing the shielding current and penetrated field relate in resistive perturbed tokamak equilibria using asymptotically matched solutions with a resistive MHD inner layer model in GPEC. b p e n b_{pen} scales with Lundquist number as S − 2 / 3 S^{-2/3} until saturation at low S S , and Δ m n \Delta_{mn} remains consistent with its ideal definition but is affected by global kink structure. Both metrics are shown to yield closely similar dominant coupling modes within the same resistive model. However, the resistive physics shifts this dominant mode spectrum to lower poloidal mode numbers m m in a low-rotation ITER equilibrium. This alteration is predicted to be observable in experiment in the form of optimal relative phasings of resonant magnetic perturbation coils. August 10, 2026 \ioptwocol 1 Introduction Resonant magnetic perturbations (RMPs) are 3D fields in tokamaks that can arise due to error fields from coil misalignments or ferritic materials as well as intentional perturbations for the correction of error fields or suppression of edge-localized modes (ELMs). These fields affect otherwise axisymmetric tokamaks in a variety of ways, including driving magnetohydrodynamic (MHD) modes [ 1 , 2 ] , braking plasma rotation through neoclassical toroidal viscosity (NTV) [ 3 , 4 , 5 ] , increasing transport [ 6 , 7 ] , and suppressing edge-localized modes [ 8 , 9 , 10 ] . Fig. 1 sketches the effects of a resonant magnetic perturbation at a rational surface, showing the differences in magnetic field topology enforced by the presence or absence of resistivity. These effects are modeled using a variety of approaches, including linear ideal and non-ideal MHD force-free states solvers such as the GPEC suite [ 11 , 12 , 13 ] , linear MHD eigenvalue solvers such as those in the MARS family [ 14 , 15 ] , as well as high-performance nonlinear extended MHD codes such as NIMROD [ 16 ] , JOREK [ 17 , 18 , 19 ] , and M3D-C1 [ 20 , 21 , 22 , 23 ] . Modeling efforts using these codes have seen many successful applications, including successful prediction of 3D coil currents that induce ELM suppression [ 24 , 25 ] , accurate models of optimal single- and multiple-set coil currents for the elimination of core-resonant error fields that can cause mode locking [ 26 , 27 , 28 ] , and quasi-symmetric kinetic optimization of perturbed fields that reduce NTV braking [ 29 ] , among others. Every model-forward study of resonant 3D fields uses quantitative metrics of resonant mode drive, which we refer to as “resonant metrics.” Figure 1: A schematic showing the preservation of magnetic field topology in an ideal plasma (a) compared to the opening of an island as magnetic field lines reconnect (b) in the presence of a 2/1 radial field perturbation. Vertical direction in the lower island schematics is increasing poloidal coordinate and horizontal direction is radial, the same as the upper plots. There are many resonant metrics that serve varying purposes in the community. The X-point displacement is one such quantity, which was adopted as a metric when studies [ 30 , 31 ] showed that the maximum displacement of the outer surface of a modeled plasma correlates with ELM suppression in several tokamaks. This metric is naturally used because it can both be retrieved from spectral simulations [ 32 ] and be compared to experimental data, but it has been shown to be sensitive to the equilibrium reconstruction [ 33 ] . One old metric used in design work for ITER is the 3-mode metric [ 34 , 35 , 36 ] , which arbitrarily weights the first three ( m=1-3 ) Fourier harmonics of the resonant vacuum field in a geometric average. This has the advantage of referring to a resonant quantity that directly drives penetration, but the omission of the plasma response was a critical flaw, as well as its dependence on the coordinate system [ 37 , 38 ] and its demonstrated experimental inadequacy [ 27 , 26 ] . The island overlap width (IOW) and vacuum island overlap width (VIOW) are other commonly used metrics — however, since they have a discontinuous relationship with perturbation amplitude, they are usually seen alongside their respective Chirikov parameters [ 39 , 40 ] . The IOW requires a plasma response model, which can either come from a resistive code which gives a finite penetrated resonant field, or from an ideal code in which the penetrated resonant field is identically zero and the “effective” island width is calculated from the field derivative discontinuity \Delta_{mn} [ 41 ] . The response-inclusive Chirikov parameter too has drawbacks, as the shielded flux is not equivalent to the penetrated flux which actually correlates with island width in resistive models. \Delta_{mn} itself is another commonly used resonant metric, and is now (in the form of the associated shielded resonant flux) used in ideal analyses of error field correction (EFC) in DIII-D [ 26 , 27 ] , ITER [ 42 , 43 , 44 , 45 , 46 , 47 , 48 ] , and SPARC [ 49 ] , among others. \Delta_{mn} has the advantage of being proportional to the shielding current at a rational surface, and therefore essentially a direct coefficient for the magnitude of the resonant response. However, \Delta_{mn} is only well-defined in ideal MHD, where there is a discontinuity in the magnetic field at rational surfaces. Resistive and other non-ideal MHD formulations allow for a finite penetrated field at rational surfaces, which smooths this discontinuity. Several quantities derived from \Delta_{mn} have also been used. One such is the average magnitude of shielded flux in the plasma edge, which was used to accurately predict the multi-dimensional phase space of ELMy, ELM-suppressed, and mode-locked states in KSTAR [ 24 ] . More robust than this simple average is the dimensionless, singular value decomposed (SVD) inner product quantity \delta known as the dominant mode overlap [ 28 , 33 ] . The overlap \delta has seen applications in identifying optimal EFC currents [ 27 ] and scaling-law-based [ 50 , 51 ] design evaluations [ 47 , 49 ] . Another direct metric is the penetrated resonant field b_{pen}^{res} itself. Specifically, this is the plasma response inclusive pitch-resonant surface-normal field, \frac{1}{\left|\nabla\psi\right|}\vec{b}_{mn}\cdot\nabla\psi . b_{pen}^{res} can be identified in resistive codes like M3D-C1 and MARS-F, and its use has been reported in evaluations of resonant drive in EAST [ 52 , 53 , 54 ] , DIII-D [ 31 , 55 , 56 ] , and ASDEX Upgrade [ 57 , 30 ] . Having a perturbed pitch-resonant surface-normal field at a rational surface is synonymous with having an