Stroboscopic detection of itinerant microwave photons

Hanna Zeller, Lukas Danner, Max Hofheinz, Ciprian Padurariu, Joachim Ankerhold, Björn Kubala · 2026

Read Stroboscopic detection of itinerant microwave photons by Hanna Zeller, Lukas Danner, Max Hofheinz, Ciprian Padurariu, Joachim Ankerhold, Björn Kubala (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-16522.txt.

Introduction

Zeller and co-authors detect single microwave photons on the fly. Their device uses two cavities joined by a biased superconducting junction. A photon entering one cavity is measured again and again, stroboscopically. Homodyne readout of the other cavity reveals the hit. Flux control tunes the rate, length, and strength of each look. A threshold rule keeps dark counts low. With a preamplifier stage added, efficiency reached 88.5% at very low dark counts.

Catalog record

CREATORHanna Zeller, Lukas Danner, Max Hofheinz, Ciprian Padurariu, Joachim Ankerhold, Björn Kubala
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE42589
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2603.16522

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Stroboscopic detection of itinerant microwave photons Hanna Zeller, Lukas Danner, Max Hofheinz, Ciprian Padurariu, Joachim Ankerhold, Björn Kubala Abstract We present a novel scheme to detect itinerant microwave radiation at the single photon level. Using existing Josephson-photonics devices, where two microwave cavities are coupled by a dc-voltage biased superconducting junction, we theoretically show how to implement a stroboscopically repeated, near-projective measurement of a photon impinging on one of the cavities. Optimizing rate, duration, and strength of the measurement by flux control of the junction and developing a threshold protocol to detect the photon from a homodyne measurement of the radiation output of the other cavity, we achieve highly efficient detection with low dark counts. By cascading the detector with a preamplifier, where a similar two-cavity Josephson-photonics device acts as a photon multiplier, we can further improve the device to reach a detection efficiency of 88.5 % 88.5\% with a dark count rate of ∼ 10 − 4 ​ γ a \sim 10^{-4}\gamma_{a} , set by the resonance width γ a \gamma_{a} of the absorbing cavity. These results for a multiplication factor of two suggest that near-unity efficiencies may be reached for higher multiplication factors. I Introduction The efficient detection of single itinerant microwave photons remains a highly challenging task. This functionality is a key ingredient for many protocols and technologies in quantum information processing, quantum sensing, and quantum communication that rely on the quantum dynamics of superconducting electronic devices casariego_propagating_2023 ; gu_microwave_2017 . More recently, they have also been used in magnetic resonance spectroscopy on single spins wang_single-electron_2023 ; travesedo_all-microwave_2025 ; osullivan_individual_2025 or spin ensembles albertinale_detecting_2021 ; billaud_electron_2025 and in dark matter search experiments dixit_searching_2021 ; braggio_quantum-enhanced_2025 ; pankratov_towards_2022 . The requirements for different applications are as varied as the schemes of proposed and realized single-photon microwave detectors (see recent reviews casariego_propagating_2023 ; gu_microwave_2017 ; sathyamoorthy_detecting_2016 and references within). Schemes include bolometric detectors karimi_quantum_2020 ; karimi_bolometric_2024 ; kokkoniemi_nanobolometer_2019 ; kokkoniemi_bolometer_2020 ; gunyho_single-shot_2024 , which have not yet reached single-photon sensitivity, threshold detectors chen_microwave_2011 ; ladeynov_detection_2025 ; pankratov_towards_2022 ; rettaroli_josephson_2021 ; oelsner_detection_2017 ; he_experimental_2025 ; wang_observing_2025 , efforts to improve efficiency by arrays or cascades of detectors fan_nonabsorbing_2014 ; sathyamoorthy_quantum_2014 ; royer_itinerant_2018 ; navez_quantum_2023 , various platforms incorporating qubits driven by complex pulse sequences inomata_single_2016 ; besse_single-shot_2018 ; kono_quantum_2018 , or devices specifically designed for resolving the photon-number distribution of a pulse with known arrival time dassonneville_number-resolved_2020 . Many proposals incorporate as the first step in the detection chain a cavity, on which the itinerant photon impinges. The state of the cavity is measured to detect if a photon has been absorbed, thus rendering the task of detecting an itinerant photon into the read-out of a quantum state. It has long been recognized helmer_quantum_2009 ; royer_itinerant_2018 that in any such proposal the measurement of the cavity’s state induces a Zeno-type backaction, which adversely affects the absorption of the incoming photon by the cavity, limiting the detection efficiency. Here, we revisit this basic idea, but introduce three novel ingredients to such a scheme: Firstly, we show within a toy-model, that stroboscopically repeated, instantaneous projective measurements of the cavity, which leave the cavity free to absorb the photon undisturbed in between the measurement instances, can achieve efficient detection. Secondly, we show that such a scheme can be realized utilizing existing Josephson-photonics devices , where two microwave resonators are coupled by a dc-voltage biased Josephson junction. These versatile devices can implement a variety of unconventional nonlinear single- or multi-photon drives gramich_coulomb-blockade_2013 ; armour_universal_2013 ; leppakangas_nonclassical_2013 ; leppakangas_antibunched_2015 ; armour_josephson_2015 ; trif_photon_2015 ; aissaoui_cat_2024 to create microwave radiation with interesting (quantum) properties hofheinz_bright_2011 ; westig_emission_2017 ; chen_realization_2014 ; cassidy_demonstration_2017 ; rolland_antibunched_2019 ; grimm_bright_2019 ; peugeot_generating_2021 ; menard_emission_2022 , and have also been proposed leppakangas_multiplying_2018 ; danner_amplification_2025 and tested jebari_near-quantum-limited_2018 ; albert_microwave_2024 ; martel_influence_2025 for amplification and detection tasks. Here, they are used to implement a drive of the second cavity which (i) depends on the state of the first one and (ii) can be switched on and off via the flux bias of a superconducting quantum interference (SQUID) Josephson junction. Sending the itinerant photon on the first and monitoring the output of the second cavity by homodyne detection then mimics the aforementioned toy-model. Investigating the full simulation of the device’s quantum dynamics under a detailed measurement protocol, we find promising results with detection efficiency reaching 69.8\% for realistic system parameters. Thirdly and finally, we will describe how our scheme can be improved by preamplifying the photon with the same type of Josephson-device, acting as a photomultiplier as described in leppakangas_multiplying_2018 ; danner_amplification_2025 ; albert_microwave_2024 . Simulating a cascaded chain of a two-fold multiplier and a detector, we will show a detection efficiency which closely approaches simple estimates based on the toy-model, promising further improvements for higher multiplication factors. II Stroboscopic projective detection of an itinerant photon Figure 1: (a) Effective description of a microwave cavity driven by an input field. The scenario is theoretically modeled by a cascaded Master equation involving an auxiliary cavity a_{u} that emits the quantum pulse u(t) via a tunable decay coupling g_{u}(t) (blue arrow). We assume a Gaussian mode u(t)\sim\mathrm{e}^{-(\sigma_{\omega}t)^{2}/2} with spectral width \sigma_{\omega}=\gamma_{a} in a single-photon Fock state \ket{\psi}_{u}=\ket{1}_{u} . The input field is partly reflected and partly absorbed and re-emitted by the microwave cavity. (b) Occupations of auxiliary cavity a_{u} emitting the photon, cavity a which absorbs and subsequently emits the photon, and the integrated output n_{\mathrm{out}}=\int_{0}^{t}\langle{\hat{L}_{a}^{\dagger}\hat{L}_{a}}\rangle(t^{\prime})\differential t^{\prime} . The plateau in n_{\mathrm{out}} at t\gamma_{a}\approx 4 indicates destructive interference of contributions from direct reflection and from photon absorption and re-emission. Figure 2: Stroboscopic projective measurements (performed with frequency \gamma_{\mathrm{m}}=0.2\gamma_{a} ) of a microwave cavity a that is subject to an impinging resonant Gaussian single-photon pulse ( \sigma_{\omega}/\gamma_{a}=0.1 ). Each measurement projects the cavity’s state either to \ket{1}_{a} (i.e. the photon is detected) or to \ket{0}_{a} , where the photon remains undetected (c.f. schematic setup in the inset). The solid line shows a trajectory where the photon was never detected, while the dashed trajectory detects the photon in the measurement at t_{\mathrm{m},j}=47/\gamma_{a} , where the (total) state is projected to \ket{\psi}=\ket{01}_{u,a} . Because of the subsequent exponential decay, the cavity occupation will be (with very high probability) projected to vacuum in the following measurement. The probability to find the photon at measurement j , p_{j}(1)=p_{j}(O_{j}=1,\,O_{k}=0\,\forall\,k<j) is indicated by purple markers, while the total photon detection probability is \eta=67\% . The y-axis shows both the occupation and the probability (same scale). [Parameters: \gamma_{\mathrm{m}}=0.2\gamma_{a} , \sigma_{\omega}=0.1\gamma_{a} , \Delta_{a}=0 .] Figure 3: Detection probability \eta depending on the measurement rate \gamma_{\mathrm{m}} for different pulse shapes. The curves were averaged over several measurement positions relative to the pulse. Shaded regions indicate the range of detection probabilities depending on the relative measurement position. A maximum detection probability of \eta=81\% can be achieved for a measurement rate \gamma_{m}=0.4\gamma_{a} for spectrally narrow and resonant Gaussian input pulses (solid light blue, \sigma_{\omega}=\gamma_{a}/10 ), while it peaks at \eta=78\% for resonant exponential input pulses, u(t)=\sqrt{\gamma_{u}}\,\theta(t)\,\mathrm{e}^{-\gamma_{u}t/2} (where \gamma_{u}=\gamma_{a}/10 , dashed). For spectrally broader Gaussian input pulses ( \sigma_{\omega}=\gamma_{a} , dark blue line and region), and for a time-reversed exponential pulse u(t)=\sqrt{\gamma_{u}}\,\theta(-t)\,\mathrm{e}^{\gamma_{u}t/2} ( \gamma_{u}=\gamma_{a} , red line and region), the maximum detection probability is significantly smaller. Due to the stricter

Read the complete text