Tangent measures of self-similar sets satisfying the strong separation condition Supported by the Fundamental Research Funds for the Central Universities (Grant No. 60201525020).

Yongtao Wang · 2026

Read Tangent measures of self-similar sets satisfying the strong separation condition Supported by the Fundamental Research Funds for the Central Universities (Grant No. 60201525020). by Yongtao Wang (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-16467.txt.

Introduction

Wang studies tangent measures of self-similar sets with strong separation. Tangent measures come from zooming in at a typical point, in Preiss's sense. For strongly separated sets, he derives one explicit formula. The formula is uniform across this class of sets. He then loosens the assumption to the open set condition. There, each tangent measure's support is a limit model at that point. Every limit model also arises as such a support.

Catalog record

CREATORYongtao Wang
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE92245
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2603.16467

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Tangent measures of self-similar sets satisfying the strong separation condition Supported by the Fundamental Research Funds for the Central Universities (Grant No. 60201525020). Yongtao Wang Abstract \PageNum 1 \Volume 201xSep.xx \OnlineTime August 15, 201x \DOI 0000000000000000 \AuthorMark Wang Y. \TitleMark Tangent measures of self-similar sets School of Science, Northeast Forestry University, Harbin, 150040, Heilongjiang Province, China E-mail :[email protected] \Abstract This paper investigates tangent measures in the sense of Preiss for self-similar sets on {{\mathbb{R}}^{d}} that satisfy the strong separation condition. Through the dynamics of “zooming in” on any typical point, we derive an explicit and uniform formula for the tangent measures associated with this category of self-similar sets on {{\mathbb{R}}^{d}} . Furthermore, for any self-similar set C\subset{{\mathbb{R}}^{d}} under the open set condition instead of the strong separation condition, we find that the support of any tangent measure at each point x\in C is one of the limit models at that point. Conversely, any limit model at each point x\in C is the support of one of the tangent measures at that point. \Keywords Self-similar sets, s -regular, Tangent measures, Limit models, \omega -limit set, The strong separation condition \MRSubClass 28A33, 28A78, 28A80 1 Introduction Tangent measures were introduced by David Preiss in [ 1 ] for the study of sets and measures, and they have turned out to be a powerful tool for studying some geometric properties of measures, e.g., rectifiability. Tangent measures contain information about the local structure of a given Radon measure in a similar but often more complicated way as the derivative of a function tells us about the local behaviour. Since then, scholars have begun to focus on the local structure of more general sets and measures, such as sets and measures with fractional dimensions. Over the past thirty years, the research on the local structure of fractals has received extensive attention. Many scholars have conducted research by introducing new concepts such as tangent measure distributions [ 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 , 11 , 12 , 13 , 14 , 15 , 16 ] and tangent sets [ 17 , 18 , 19 , 20 , 21 , 22 , 23 ] and have achieved remarkable progress. Among them, tangent measure distributions, which describe local behavior from a statistical and probabilistic perspective, have become the mainstream method in current research. They are particularly useful for tasks such as characterizing the uniformly scaling property of fractals [ 12 , 10 , 6 , 7 , 8 , 9 , 11 , 5 ] . In addition, tangent sets have intuitive geometric meanings when studying the local structure of fractals and are more easily accepted and applied by researchers. However, tangent measure distributions and tangent sets are difficult to effectively describe the local characteristic of each point, especially in non-typical points. Currently, there are relatively few works on using tangent measures to study fractals directly, see [ 24 ] for the latest research work. The main reason is that the construction of tangent measures depends on specific points and particular scaling paths, which makes analysis difficult and lacks a unified explicit expression. Moreover, even if the selected points are the same but the scaling paths are different, it may also lead to the non-uniqueness of tangent measures, thus increasing the complexity and difficulty of analysis. This paper investigates tangent measures for self-similar sets on {{\mathbb{R}}^{d}} satisfying the strong separation condition and derives an explicit and uniform formula. In collaboration with other scholars, a similar problem has been discussed about two types of non-rotational self-similar sets under different separation conditions, namely, homogeneous Cantor sets and non-homogeneous Cantor sets [ 25 , 26 , 27 ] . The distinction between them lies in whether the Lipschitz constants of the similitudes in the iterated function system that generates them are all equal (see Definition 2.3 ). In this paper, we allow similitudes to include rotations, which undoubtedly increases the difficulty of the discussion. To solve the problem of the explicit expression of tangent measures, we propose a method based on the “limit models” (see Definition 3.7 ), which directly connects the construction of tangent measures with the limit models. Through this method, for some fractals, not only can the explicit expression of the tangent measures at a single point be obtained mathematically, but also the local characteristic of typical and non-typical points can be uniformly processed. Our main result is as follows: Theorem 1.1 . Let C\subset{{\mathbb{R}^{d}}} be a self-similar set satisfying the strong separation condition (see Definition 2.2 and Definition 2.4 ). Let \mu={{\cal H}^{s}}\lfloor_{C} with s={\dim_{H}}(C) . Then for any x\in C , we have {\mathop{\rm Tan}\nolimits}(\mu,x)=\{{c{\cal H}^{s}}\lfloor_{F}|F\in\omega({C^{x}}),c>0\}, where \omega({C^{x}}) denotes the class of “tangent set” of C at x (see Definition 3.7 ). Remark 1.2 . Suppose C\subset{{\mathbb{R}}^{d}} is a self-similar set. If there exists a hyperplane P such that C\subset P , we can restrict ourselves to the lower-dimensional space P , and repeat until it is no longer contained in any hyperplane. Therefore, without loss of generality, regarding Theorem 1.1 we can assume that C is not included in any hyperplane in {{\mathbb{R}}^{d}} . It remains unclear whether Theorem 1.1 holds under the weaker assumption of the open set condition instead of the strong separation condition, or for more general s -regular sets. However, in the last part of this paper, for any s -regular Radon measure \mu on {{\mathbb{R}}^{d}} with C=\operatorname{spt}\mu (including any measure \mu={{\cal H}^{s}}\lfloor_{C} , where C\subset{{\mathbb{R}}^{d}} is a s -regular set), we show that the support of any tangent measure at each point x\in C must be one of the limit models at that point. Conversely, any limit model at each point x\in C is the support of one of the tangent measures at that point (see Theorem 1.3 ). Theorem 1.3 . Given any s -regular Radon measure \mu on {{\mathbb{R}}^{d}} with C=\operatorname{spt}\mu (see Definition 5.1 ). Then for any x\in C , we have \displaystyle\omega({C^{x}})=\{\operatorname{spt}\nu|\nu\in{\mathop{\rm Tan}\nolimits}(\mu,x)\}, (1.1) where \operatorname{spt}{\nu} is the smallest closed set A such that \nu({{\mathbb{R}^{d}}}\backslash A)=0 . Remark 1.4 . Suppose C\subset{{\mathbb{R}}^{d}} is a self-similar set satisfying the strong separation condition. Equation ( 1.1 ) can be easily derived from Theorem 1.1 . The rest of the paper is organized as follows: • In Section 2, we give the main definitions and fundamental properties, such as self-similar sets and tangent measures. • In Section 3, we provide a detailed discussion of limit models. • In Section 4, we prove Theorem 1.1 . • In Section 5, we prove Theorem 1.3 . 2 Preliminaries The main definitions and basic properties of this section are quoted from Mattila’s geometric measure theory. For more details see Mattila [ 28 ] . Definition 2.1 ( [ 28 ] ; 4.13.Self-similar sets) . A mapping \varphi:{{\mathbb{R}}^{d}}\to{{\mathbb{R}}^{d}} is called a similitude on {{\mathbb{R}}^{d}} if there is r , 0<r<1 , such that \left|{\varphi(x)-\varphi(y)}\right|=r\left|{x-y}\right| for x,y\in{{\mathbb{R}}^{d}} . Similitudes are exactly those maps \varphi which can be written as \varphi(x)=rg(x)+z , x\in{{\mathbb{R}}^{d}} for some g\in O(d) , z\in{{\mathbb{R}}^{d}} and 0<r<1 . Here O(d) denotes the set of all orthogonal transformations of {{\mathbb{R}}^{d}} . Definition 2.2 (see [ 29 , 30 ] )

Read the complete text