Experimental investigation of a multi-buoy cooperative point-absorber wave energy converter

Herman Martens Meyer, Leif Arne Tønnessen, Olav Gundersen, Atle Jensen · 2026

Read Experimental investigation of a multi-buoy cooperative point-absorber wave energy converter by Herman Martens Meyer, Leif Arne Tønnessen, Olav Gundersen, Atle Jensen (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-15637.txt.

Introduction

Meyer and co-authors test a wave energy converter built from linked buoys. The buoys share one closed hydraulic circuit that drives a turbine. A 1:40 scale model ran in the wave tank at the University of Oslo. The team compared an eight-buoy layout with tight spacing and a four-buoy layout with wide spacing. The eight-buoy layout gave the most power per buoy. It also reacted more to wave period and heading. Wider spacing cut harmful buoy clashes.

Catalog record

CREATORHerman Martens Meyer, Leif Arne Tønnessen, Olav Gundersen, Atle Jensen
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE55672
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2603.15637

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Experimental investigation of a multi-buoy cooperative point-absorber wave energy converter Herman Martens Meyer, Leif Arne Tønnessen, Olav Gundersen, Atle Jensen Abstract This study presents a proof-of-concept experimental investigation of a multi-buoy cooperative point-absorber wave energy converter (WEC). The proposed concept consists of an array of surface-penetrating buoys connected through a shared closed-loop hydraulic power take-off (PTO) system. Energy is extracted through the collective motion of the buoy array, where pressurised flow generated by individual buoys drives a turbine within the hydraulic circuit. A 1:40 scale model was tested in the wave tank facilities at the University of Oslo. Experiments with regular and irregular long-crested waves at two different incident angles were conducted to assess power absorption, wave period response, and interaction effects. Two array configurations were investigated: an eight-buoy array with an axis-to-axis spacing of 1.5 buoy diameters, and a four-buoy array with a 3.0 diameter spacing. Although piston head leakage affected the power measurements, our results demonstrate that the WEC absorbs incoming wave energy and produces measurable power. The eight-buoy configuration achieved the highest power output per buoy compared to the four-buoy configuration, but exhibited increased sensitivity to wave period and wave heading, due to buoy-buoy interactions, such as collisions. This study highlights buoy count and internal buoy spacing as key design parameters for cooperative point-absorber wave energy systems. The results indicate that higher buoy counts enhance hydraulic cooperation, and increased buoy spacing improves robustness to wave heading and reduces destructive interaction effects. We also suggest that a lower system inertia can improve responsiveness to shorter waves. These insights provide a foundation for further optimisation and future full-scale development. 1 Introduction As global energy demand is rapidly increasing ( 10 ) and global consensus is leaning towards greener alternatives, wave energy conversion stands out as an untapped resource with significant theoretical potential. With oceans covering more than 70% of the Earth and surface waves estimated to contain power on the order of 1-10 TW ( 29 ; 26 ; 17 ) , wave energy remains a substantially underdeveloped field. While solar and wind energy have converged on optimal designs, wave energy technologies remain unsettled, with many device and power-take-off (PTO) systems proposed ( 18 ) . Unlike solar and wind, waves offer high availability (90% ( 30 ; 18 ) ). A promising use case is co-locating wave energy conversion systems with wind or solar parks to smooth power output and share cost for infield infrastructure and services ( 34 ; 42 ) . Waves naturally lag behind the wind, and when combined, can reduce the variability of wind power ( 3 ) . Since the early concepts of 31 and 8 , wave energy converter (WEC) development has led to a wide range of device types. These are commonly grouped into oscillating water column devices, overtopping converters, and oscillating body systems ( 12 ; 2 , see reviews by) . The latter category spans a wide range of floating or submerged structures that move with the wave motion. Within this category are point absorbers, which extract energy from motions at a single point and are small compared to the incoming wave ( 15 ) . 18 provides a comprehensive review of point absorber WECs. Attenuators form another type of oscillating body system, mainly consisting of multiple floating structures aligned parallel to the incoming waves, where energy is extracted from the relative motion between the bodies ( 44 ; 38 ) . Both concepts rely on oscillatory body motion, and the concept presented later shares several hydrodynamic mechanisms with both. While point absorbers operate mainly in the heave mode ( 18 ) , it has been shown that a combination of multiple degrees of freedom (DOFs) could increase power production ( 33 ) . Attenuators, such as the M4 ( 39 ) , absorb power from the pitch motion between the different elements of the WEC and utilise that different parts of the elongated body that are located in different wave phases. Although power absorption can increase by combining multiple DOFs, the coupling between these modes can significantly impair power absorption if not properly tuned ( 19 ; 40 ) . This interaction between different DOFs can also influence the diffracted and radiated wave field from each WEC. Many WEC concepts are envisioned to be deployed in large wave energy parks with multiple elements, and their interactions introduce a whole new level of complexity. This park effect is studied both analytically, numerically ( 16 , see parts of) and experimentally ( 41 ) . More relevant for the present study, the spacing between point absorbers is investigated from 1.25D-20D in the literature ( 41 , see review by) , and it has been shown to lead to significant alterations in the wave field for more than 40D ( 6 ) , with D being the point absorber diameter. This park effect can lead to both constructive and destructive interaction effects within the array ( 4 ) . Experimental model testing plays a crucial role in understanding hydrodynamic effects and in validating numerical models prior to full-scale development ( 41 ) . Numerous studies have used downscaled models to investigate device performance, mooring behaviour, survivability, and energy capture across various sea states ( 7 ; 38 ; 23 ; 43 ; 21 ; 28 ; 35 ) . Despite this progress, there remains a need for experimental data on new WEC concepts. There is also a need to identify and develop wave energy solutions that are both affordable and reliable. In this article, we present a novel wave energy conversion concept that combines the point-absorber and attenuator principles. This device is tested in the new wave tank at the University of Oslo under a range of regular and irregular wave conditions to estimate power output across different seas and to assess device performance across wave conditions. The purpose of this study is to conduct a proof-of-concept study of the WEC, and we will focus on birds-eye-view characteristics such as power capture, wave period response, and interaction effects. This, along with the details of the 1:40 model of the WEC, is presented in Sec. 3 . In Sec. 4 we present the wave tank facilities and the experimental setup. In Sec. 5 , we present and discuss the experimental results as well as some suggestions for future design improvements and further testing before conclusions are drawn in Sec. 6 . 2 Theory and performance measures As will be described in Sec. 3 , we utilise the measured flow rate, Q , and the pressure difference between the high and low pressure side of the system, \Delta p , to obtain the absorbed power by the WEC, P_{\text{abs}}=Q\Delta p . For the subsequent analysis, we assume linear waves as we mainly operate with low wave steepness, ak<0.1 , where k=2\pi/\lambda is the wave number and a the wave amplitude. In terms of providing device performance, we utilise some simple relations. Incident wave power can be expressed as power per unit of crest length (W/m), and for linear waves, we have J=\rho g\int_{0}^{\infty}S(f)c_{g}(f)df, (1) where \rho is water density, g gravitational acceleration, S(f) is the spectral density of the incident wave, and c_{g}

Read the complete text