Design and operation of a spark chamber for vacuum ultraviolet light production

Silas Bosco, Jonas Bürgi \orcidH, Livio Calivers, Richard Diurba, Johannes Furrer \orcidK, Jan Kunzmann, Saba Parsa, Sascha Rivera, Nicolas Sallin \orcidJ, Camilla Tognina, Serhan Tufanli ∗ *, Michele Weber, Dominik Wermelinger \orcidI · 2026

Read Design and operation of a spark chamber for vacuum ultraviolet light production by Silas Bosco, Jonas Bürgi \orcidH, Livio Calivers, Richard Diurba, Johannes Furrer \orcidK, Jan Kunzmann, Saba Parsa, Sascha Rivera, Nicolas Sallin \orcidJ, Camilla Tognina, Serhan Tufanli ∗ *, Michele Weber, Dominik Wermelinger \orcidI (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-15273.txt.

Introduction

Bosco and co-authors describe a flash lamp that produces vacuum ultraviolet light for testing light sensors. Noble liquids such as argon and xenon glow in this band when particles pass through, so dark matter and neutrino detectors depend on such sensors. The lamp mimics the wavelengths seen in those detectors. The authors detail the design choices behind it. They also report results from a prototype run at room temperature.

Catalog record

CREATORSilas Bosco, Jonas Bürgi \orcidH, Livio Calivers, Richard Diurba, Johannes Furrer \orcidK, Jan Kunzmann, Saba Parsa, Sascha Rivera, Nicolas Sallin \orcidJ, Camilla Tognina, Serhan Tufanli ∗ *, Michele Weber, Dominik Wermelinger \orcidI
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE14086
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2603.15273

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Design and operation of a spark chamber for vacuum ultraviolet light production Silas Bosco, Jonas Bürgi \orcidH, Livio Calivers, Richard Diurba, Johannes Furrer \orcidK, Jan Kunzmann, Saba Parsa, Sascha Rivera, Nicolas Sallin \orcidJ, Camilla Tognina, Serhan Tufanli ∗ *, Michele Weber, Dominik Wermelinger \orcidI Abstract Noble liquids, notably argon and xenon, are utilised as both detector media and as the detector target for dark matter and neutrino physics experiments. When the noble liquid is excited by particles, it scintillates vacuum ultraviolet light, which sensors then detect. A major focus of the detector development community is on producing precision light sensors for noble liquid detectors. We introduce a flash lamp to test light sensors with light at wavelengths observed at noble liquid detectors. This paper discusses the design and presents results from a spark chamber prototype operated at room temperature. keywords noble liquid scintillation light, detector development † † firstpage: 1 † † volume: 1 † † issue: 1 † † articlenumber: 0 † † year: 2026 † † copyright-year: 2026 † † authornames: Silas Bosco, et. al. † † address: 1 Laboratory for High Energy Physics, Albert Einstein Center for Fundamental Physics, Universität Bern, 3012 Bern, Switzerland † † corresponding: Correspondence: [email protected] † † reftitle: References 1 Introduction Argon and xenon-based detector technologies are utilised by many neutrino and dark matter experiments Abi et al. 2020 ; Hewes et al. 2021 ; Amaudruz et al. 2019 ; Aalseth et al. 2018 ; Aprile et al. 2024 ; Akerib et al. 2020 . The excitation of the detector medium by particles generates prompt scintillation light via argon-excimer de-excitation, yielding photons in the vacuum ultraviolet (VUV). For argon, this light has a peak wavelength at 128 nm Doke et al. 2002 . Experiments surround the detector material with light sensors to maximise signal detection. The light detection signals from the sensors are then used to identify and characterise particles in the medium. Direct tests in noble liquids reproduce the desired spectrum but are time- and infrastructure-intensive as they require cryogenic systems. Test setups for light sensors rely on light-emitting diodes (LEDs), whose spectra do not extend into the VUV. Improvements have been made to provide VUV light without significant infrastructure at relevant wavelengths with deuterium lamps, such as Nikhef’s VULCAN system van Nuland-Troost et al. 2024 . However, these commercial lamps produce spark emission and quasi-constant light, which is not ideal for signal-shaping or single-photoelectron performance studies. These limitations highlight the need for a room-temperature device that promptly produces VUV photons with high spectral purity. An example of such an argon lamp is presented in Reference McDonald et al. 2022 . We have designed an argon flash lamp, a compact apparatus that exploits electrical discharges in argon gas to generate VUV light through the same excimer processes occurring in the liquid phase. The lamp is intended to be portable and flexible to changes in electrode distance and gas pressure, while enabling precise, repeatable characterisations of photosensors for noble element detectors. The testing setup proposed here also produces light pulses on the \mu s-timescale to allow the data acquisition system to synchronise timing between the lamp and light sensors. This paper describes the design and operation of the flash lamp. 2 Design of the Argon Flash Lamp The sparking chamber is the core of the argon flash lamp. The chamber is a cylindrical vessel 65 mm in diameter and 73 mm tall, machined from poly-ether-ether-ketone (PEEK). This high-performance thermoplastic offers exceptional electrical insulation, chemical inertness, and mechanical strength. Its low outgassing rate and dimensional stability across a broad temperature range make PEEK especially well-suited for vacuum and high-voltage environments, permitting precise electrode alignment and reliable operation through repeated discharge cycles. A diagram of the chamber is shown in Figure 1 , with Figure 2 showing diagrams from the side and front views of the chamber. Two aluminium feedthroughs are integrated into the sidewall. High-purity argon travels through these aluminium feedthroughs. VUV light flashes are produced between a pair of opposing electrodes positioned at the top and bottom of the chamber and aligned along the central axis, as shown in Figure 2 . The electrodes can be in contact, and the rotary mechanism allows for their distance to increase in 0.1 mm increments to a maximum separation of 10 mm. The internal parts of the rotary adjustment mechanism are fabricated from copper to ensure excellent conductivity. The assembly is sealed with O-rings to maintain vacuum integrity while providing smooth rotation and electrical isolation from the chamber body. A monitoring SiPM connected to a printed circuit board (PCB) is installed on one side of the chamber. This SiPM is inside the chamber to monitor flash synchronisation and light production. On the opposite side of the chamber from the monitoring SiPM, a filtering window is covered with a P/N 25125FNB VUV-Optical Filter produced by eSource Optics eSource Optics . The filter allows only light within the narrow range of 125 nm \pm 2.5 nm, corresponding to the emission from argon excimer decays. The light travels through the filtering window to exit the chamber. Only 10^{-3} to 10^{-4} of light with wavelengths greater than 127.5 nm or less than 122.5 nm is transmitted through the filter, significantly reducing non-VUV light emitted from the chamber. Figure 1: Diagram of the flash lamp chamber with an interior view of the electrodes and filter. Figure 2: Diagram of the flash lamp chamber, looking at it from the side (left) and front (right) of the device. The electrical circuit consists of two parts: a low-voltage regulator and a high-voltage discharge system, as shown in Figure 3 . These two systems are connected via the Input/Output Proportional High Voltage Power Supply produced by Matsusada Precision Matsusada , which provides the regulated high voltage needed for the discharge system. The low-voltage regulator works as an adjustable linear voltage regulator. It produces a stable and controllable output voltage from a higher unregulated input supply of +20 V, unaffected by the unstable input voltage or the changing output load. Figure 3: Diagram of the electrical circuit for the spark generation. The circuit consists of two parts: the first part is the low voltage (LV), and the second part is the high voltage (HV). The high voltage discharge system is a capacitor-discharge circuit that delivers controlled sparks. The energy is stored in a bank of capacitors across the electrode gap, not shown in Figure 3 . The two capacitors in the bank have a total capacitance of \approx 100 \mu F. The energy stored can be released in a microsecond-scale pulse over a gap that is adjustable to change the intensity of the spark. The voltage on the electrodes is set with a resistive voltage divider. A thyristor gate drives the lower-potential electrode momentarily to ground. An external function generator sets the gate width and the repetition rate. 3 Light Spectrum of the Flash Lamp First, we validated the emission spectrum produced by the spark chamber. An Ocean Optics QEPro spectrometer (200 nm–1000 nm) recorded the light emission spectrum. For this test, the optical filter window was replaced with an acrylic window to allow both VUV and non-VUV light to reach the spectrometer. The resulting intensity

Read the complete text