Inflation with the standard and Randall–Sundrum model in the Two-time Physics
Vo Quoc Phong a,b · 2026
Read Inflation with the standard and Randall–Sundrum model in the Two-time Physics by Vo Quoc Phong a,b (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-15172.txt.
Introduction
Vo proposes a scalar inflation potential drawn from Higgs-dilaton ideas in two-time physics. The potential keeps a Z2 symmetry for all exponent choices and resembles shaft inflation. He recomputes slow-roll inflation in plain four dimensions and in the Randall-Sundrum II braneworld. The tensor-to-scalar ratio runs higher in the braneworld version and fits BICEP2 and Planck data well. Matching Planck data puts the five-dimensional scale near 10^16 GeV. The results, he argues, support taking extra dimensions seriously.
Catalog record
| CREATOR | Vo Quoc Phong a,b |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 27036 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2603.15172
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Inflation with the standard and Randall–Sundrum model in the Two-time Physics Vo Quoc Phong a,b Abstract We propose a scalar inflationary potential as V ( ϕ ) = M 4 ϕ 2 n − 2 ( ϕ 2 n + m 2 n ) 1 / n − 1 V(\phi)=M^{4}\phi^{2n-2}(\phi^{2n}+m^{2n})^{1/n-1} . This potetial similar to the shaft inflation one. The potential may come from the Higgs-dilaton potential in the Two-time (2T) physics, especially in the case where n = 3 n=3 , this suggests an explanation for the inflationary potential. Therefore, we call it shaft-warm inflation potential for short. The slow-roll scenario is recomputed in the 4-dimension (4D) and Randall-Sundrum II (RSII) frameworks. The tensor-to-scalar ratio in RSII is always higher than in 4D and is in good agreement with the experimental data of BICEP2 and Planck. When compared with Planck data we estimate M 5 M_{5} to be around [ 1 − 2 ] × 10 16 [1-2]\times 10^{16} GeV. Furthermore, the potential allows much lower scalar field exponents than other potentials, which results in high agreement with experimental data. I Introduction The inflation is the dominant paradigm to handle the fine-tuned challenge of the Universe’s early conditions guth . As for the nature of inflaton, there are many hypotheses. It can be summarized as follows: Inflaton can be Higgs, an exotic scalar particle, some particles outside the SM. The search for inflationary models is a vibrant area of research, providing a wide range of potentials to trace the causes as well as assumptions about exotic particles or new physics. There are two basic types of inflation today: the first is the slow-roll form, the second is the non-slow-roll forms like the warm inflation. However the concave-like inflaton potentials are more advantageous, as shown by the most recent findings from Planck, WMAP, and BICEP/Keck observations, which indicate that there are no large primordial tensor perturbations bicep . The hierarchy problem—the enormous difference between the electroweak and Planck scales—inspired several solutions by altering the very structure of spacetime. In particular, some models explain the hierarchy problem by adding one or more additional dimensions. The fundamental hint is that gravity is significantly weaker than other forces because gravity may escape through additional dimensions. These extra dimensions are theoretically compatible with quantum gravity in string theory joe . They are often expressed as being very small. However, in some models, there are suggestions that their size may still be sufficient for current experimental observations, one of the typical models is the RSII model EPJC . Current inflation data, although scarce, is sufficient to determine several important quantities such as The tensor-to-scalar ratio (r) and the scalar spectral index (n_{s}) or the number of e-folds ( N ). These three quantities are now the three main test parameters for any scalar field inflation model. Without exception, in this article, we also focus on determining these parameters. Therefore, currently, the RSII model lisa1 ; lisa2 is popular because of its simplicity (only one extra dimension but enough to confirm it as an additional dimension) and because it meets many expectations as well as the timeliness of this model maldacena . We will analyze an inflation scenario of the inflaton potential in the RSII model. We propose that a scalar field inflation potential can come from the dilaton potential in the Two-time physics. In this article, by modifying the shaft inflation potential kostas ; kostas2 ; locjcap , we propose a new form of potential, which we call the shaft-warm potential. We are calculating the slow-roll scenario in the 4 dimensions and the RS II model. In Sec. II , we summarize the reduction of the metric and the dilaton field from the 2T to 1T. And assume that the dilaton is an inflaton. In Sec. III we calculate a shaft-warm inflation model in 4D spacetime. In Sec. IV we calculate the shaft-warm inflation in the RSII model. In Sec. V , we compare the outcomes of two models with observations and with each other. Sec. VI contains the conclusions. Throughout this article, \hbar=c=k_{B}=1 is utilized to represent natural units. II The dialton potential II.1 The 2T metric reduction The AdS_{6} space-time of the 2T physics with the metric is ds^{2}=-(dX^{0})^{2}-(dX^{5})^{2}+\sum_{i=1}^{4}(dX^{i})^{2}. (1) The above (4+2) dimensional space-time will be transformed into the (3+1) dimensional space-time with the below transformation (a gauge fixing), \displaystyle\begin{split}X^{5}&=\frac{1}{2z}(1+z^{2}(L^{2}+\overline{x}^{2}-t^{2})),\\ X^{4}&=\frac{1}{2z}(1-z^{2}(L^{2}-\overline{x}^{2}+t^{2})),\\ X^{\mu}&=Lzx^{\mu}.\end{split} (2) In which \mu=0,1,2,3 and \overline{x}^{2}\equiv\sum_{i=1}^{3}(x^{i})^{2} . The spacetime interval is rewritten as follows \displaystyle ds^{2} \displaystyle=\frac{L^{2}}{z^{2}}dx^{\mu}dx_{\mu}+\frac{L^{2}}{z^{2}}dz^{2} (3) \displaystyle=\frac{L^{2}}{z^{2}}(\eta_{\mu\nu}dx^{\mu}dx^{\nu}+dz^{2}). (4) We make another change of variable as z\rightarrow\frac{1}{r};\hskip 28.45274ptx^{\mu}\rightarrow\frac{x^{\mu}}{L^{2}}. (5) The metric becomes ds^{2}=\frac{r^{2}}{L^{2}}\eta_{\mu\nu}dx^{\mu}dx^{\nu}+\frac{L^{2}}{r^{2}}dr^{2}. (6) We make a final change of variable r=Le^{\frac{-\sigma}{L}}\rightarrow dr=-e^{\frac{-\sigma}{L}}d\sigma\rightarrow dr^{2}=e^{\frac{-2\sigma}{L}}d\sigma^{2}. (7) Then the metric becomes ds^{2}=e^{\frac{-2\sigma}{L}}\eta_{\mu\nu}dx^{\mu}dx^{\nu}+d\sigma^{2}. (8) This is exactly the form of the Randall-Sundrum metric. Accordingly, we have the first-order derivative operator, which can be simplified as follows \displaystyle\begin{split}X^{M}\partial_{M}&=X^{\mu}\partial_{\mu}+X^{4}\partial_{4}+X^{5}\partial_{5}\\ &=\frac{x^{\mu}\partial}{\partial x^{\mu}}+\frac{(z^{2}-L^{2}+\overline{x}^{2}-t^{2})\left(\frac{x^{\mu}}{L^{2}}\frac{\partial}{\partial x^{\mu}}+\frac{z}{L^{2}}\frac{\partial}{\partial z}\right)}{2}\\ &-\frac{1}{2}(z^{2}+L^{2}+\overline{x}^{2}-t^{2})\left(\frac{x^{\mu}}{L^{2}}\frac{\partial}{\partial x^{\mu}}+\frac{z}{L^{2}}\frac{\partial}{\partial z}\right)\\ &=x^{\mu}\frac{\partial}{\partial x^{\mu}}-L^{2}\left(\frac{x^{\mu}}{L^{2}}\frac{\partial}{\partial x^{\mu}}+\frac{z}{L^{2}}\frac{\partial}{\partial z}\right)\\ &=-z\frac{\partial}{\partial z}.\end{split} (9) Using the kinematical Klein-Gordon equation for scalar field in the 2T-physics 14 ; bars1 ; bars2 in the 4+2 dimensions, \displaystyle\begin{split}(X^{M}\partial_{M}+1)\Phi&=0.\\ \left(z\frac{\partial}{\partial z}-1\right)\Phi&=0.\end{split} (10) One solution to the above equation is \Phi(X)=z\phi(x). (11) In Ref. 14 , by another gauge fixing, the authors fitted the dilaton field in 4+2 dimensions to the inflaton field in the 3+1 dimensions as \Phi(X)=\frac{1}{\kappa}\phi(x). (12) The dilaton field reduction in Eq. 11 is exactly equivalent to Eq. 12 . As shown in the above reduction, we can reduce the 2T metric to the standard 4D metric or the metric of the RSII model. And the Higgs-dilaton potentials can also be reduced to the 4D. This implies that we can use the dilaton potential to examine inflation in the 4D and RSII. II.2 The Higgs-dilaton Potential The Higgs-dilaton potential has the following fourth-order form: V(H,\Phi)=f(\mathcal{S}/\Phi)\Phi^{4}, (13) where \mathcal{S}=H^{\dagger}H . H is the Higgs doublet. Currently, the Higgs-dilaton potential has been investigated in cases such as those in Table 1 . f(\mathcal{S}/\Phi) V(H,\Phi)=f(\mathcal{S}/\Phi)\Phi^{4} \frac{\lambda}{4}(\frac{\mathcal{S}^{2}}{\Phi^{2}}-\alpha^{2})^{2}+\rho/4 \lambda\left(H^{\dagger}H-\alpha^{2}\Phi^{2}\right)^{2}+\rho\Phi^{4} \frac{\lambda}{4}(\frac{\mathcal{S}^{2}}{\Phi^{2}}-\alpha^{2})^{2}+\frac{\rho}{4}+\frac{\omega^{2}}{\kappa^{2}\Phi^{2}} \lambda\left(H^{\dagger}H-\alpha^{2}\Phi^{2}\right)^{2}+\rho\Phi^{4}+\frac{\omega^{2}\Phi^{2}}{\kappa^{2}} Table 1: Cases of the Higgs-dilaton potential phong ; phong2025 . The potential forms in Table 1 have been studied in the warm inflation scenarios phong or calculated the electroweak phase transition and gravitational waves phong2025 . The potential Eq. 13 has two components, the first is the Higgs component and the interaction between the Higgs and the dilaton, the second is the dilaton component. In the simplest case, corresponding to the first row in Table 1 , the dilaton potential has the form V(\Phi)\sim\Phi^{4} . After reducing to 1T, V(\phi)\sim\phi^{4} , which corresponds to the warm inflation. If we split f(\mathcal{S}/\Phi) into two components, so that f(\mathcal{S}/\Phi)=F(\mathcal{S}/\Phi)+G(\Phi) . Thus, the dilaton potential in 2T suggests an inflationary scenario corresponding to a function G(\Phi) . III The Shaft-warm inflation in the 4D spacetime Reducing from the superpotential to the monomial F-term potential kostas ; the standard shaft inflation model in the 3+1 dimensional spacetime kostas is often expressed as \mathcal{V}(\phi)=M^{4}\phi^{2(n-1)}(\phi^{n}+m^{n})^{2(1-n)/n}. (14) The above potentials are not z_{2} symmetric for odd integers n like n=3 . So we transform them as follows: V(\phi)=M^{4}\phi^{2n-2}(\phi^{2n}+m^{2n})^{1/n-1}. (15) When \phi\ll m the potential becomes monomial, but when n\gg m the potential with a constant form or superpotential will be